[Fri Sep 30 09:28:15 2011] Detection parameters:
  Position = (642.1, 975.9) = 16 53 48.35 -39 47 15.3
  Extent = 1.2" x 0.5", rotation angle = 164 degrees
  Source counts = 38.9 +/- 6.5
  Background counts = 3.1
  Rate = 0.002 +/- 0.0004

[Fri Sep 30 09:28:17 2011] Off-axis axis estimate = 4.26'
[Fri Sep 30 09:28:50 2011] Using EEF radius (= 0.91 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 09:28:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 09:28:50 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Fri Sep 30 09:28:50 2011] source mask rpix=1.8, npix_max = 22, mask sum = 16, frac = 0.725
[Fri Sep 30 09:28:50 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.91"
[Fri Sep 30 09:28:50 2011] fullrun_ccd7_acisf10907_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 30 09:28:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10907_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 09:28:50 2011] fullrun_ccd7_acisf10907_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 30 09:28:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10907_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 09:28:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10907_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10907_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 09:28:50 2011] fullrun_ccd7_acisf10907_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 30 09:28:50 2011] fullrun_ccd7_acisf10907_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 30 09:28:50 2011] Fit fullrun_ccd7_acisf10907_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 30 09:28:55 2011] Spatial fit model total counts = 41.493100, observed total counts = 46.000000
[Fri Sep 30 09:28:55 2011] Offset between fit and detection position for source 2 = 1.505536 pixels
[Fri Sep 30 09:28:55 2011] 40.451090 total counts/ 5.919190 bgd. counts: snr = 14.193495
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.505536 pixels
  Position = (642.4, 977.4) = 16 53 48.35 -39 47 14.8
  Extent = 1.3" x 0.7", rotation angle = 35
  Source counts = 34.5 +/- 6.4
  Background counts = 5.9
  Rate = 0.002 +/- 0.0003
[Fri Sep 30 09:28:55 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 09:28:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 09:28:55 2011] Assessing source extent using major
[Fri Sep 30 09:28:55 2011] Source does appear to be extended
[Fri Sep 30 09:28:55 2011] Computing asymmetry using major and minor axis, asym = 1.80
[Fri Sep 30 09:28:55 2011] Source is asymmetric
[Fri Sep 30 09:29:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 09:29:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 09:29:09 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Fri Sep 30 09:29:09 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.995
[Fri Sep 30 09:29:09 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.99"
[Fri Sep 30 09:29:09 2011] fullrun_ccd7_acisf10907_pi14-548_cl_pass1_src3.ximg exists
[Fri Sep 30 09:29:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10907_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 09:29:09 2011] fullrun_ccd7_acisf10907_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Sep 30 09:29:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10907_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 09:29:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10907_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10907_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 09:29:09 2011] fullrun_ccd7_acisf10907_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 30 09:29:09 2011] fullrun_ccd7_acisf10907_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 30 09:29:09 2011] Fit fullrun_ccd7_acisf10907_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 30 09:29:17 2011] Spatial fit model total counts = 44.825600, observed total counts = 46.000000
[Fri Sep 30 09:29:17 2011] Offset between fit and detection position for source 2 = 1.101205 pixels
[Fri Sep 30 09:29:17 2011] 43.476060 total counts/ 6.741460 bgd. counts: snr = 14.148107
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.101205 pixels
  Position = (642.9, 976.4) = 16 53 48.33 -39 47 15.3
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 36.7 +/- 6.6
  Background counts = 6.7
  Rate = 0.002 +/- 0.0004
[Fri Sep 30 09:29:17 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 09:29:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 09:29:17 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 09:29:17 2011] Source does appear to be extended
[Fri Sep 30 09:29:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 09:30:46 2011] Not overwriting source region fullrun_ccd7_acisf10907_pi14-548_pass1_cl_src2_src.reg
[Fri Sep 30 09:30:46 2011] Extracting stamp from image fullrun_ccd7_acisf10907_pi14-548_cl_sm2.00.img.gz, (596, 929) - (690, 1024)
[Fri Sep 30 09:30:46 2011] Writing fullrun_ccd7_acisf10907_pi14-548_pass1_cl_src2.gif
[Fri Sep 30 09:30:59 2011] ../../acisf10907/products/events/fullrun_ccd7_acisf10907_pi14-548_pass1_cl_src2_src.evt and ../../acisf10907/products/events/fullrun_ccd7_acisf10907_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Sep 30 09:30:59 2011] Size of ../../acisf10907/products/events/fullrun_ccd7_acisf10907_pi14-548_pass1_cl_src2_src.evt.gz[events] = 45 counts
[Fri Sep 30 09:30:59 2011] Mean chipx,y = (623.20, 199.60)
[Fri Sep 30 09:30:59 2011] Mean tdetx,y = (4540.20, 1901.60)
[Fri Sep 30 09:30:59 2011] chipx,y range = (600.00-638.00, 177.00-217.00)
[Fri Sep 30 09:30:59 2011] Size of ../../acisf10907/products/events/fullrun_ccd7_acisf10907_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 45 counts
[Fri Sep 30 09:30:59 2011] ../../acisf10907/products/images/fullrun_ccd7_acisf10907_pi14-548_pass1_cl_src2_src.img and ../../acisf10907/products/images/fullrun_ccd7_acisf10907_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Sep 30 09:30:59 2011] ../../acisf10907/products/spectra/fullrun_ccd7_acisf10907_pi14-548_pass1_cl_src2_src.pi and ../../acisf10907/products/spectra/fullrun_ccd7_acisf10907_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Sep 30 09:30:59 2011] Not generating rmf since there are only 36 counts
[Fri Sep 30 09:31:03 2011] ../../acisf10907/products/lightcurves/fullrun_ccd7_acisf10907_pi14-548_pass1_cl_src2_src.lc and ../../acisf10907/products/lightcurves/fullrun_ccd7_acisf10907_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Sep 30 09:32:41 2011] 222.474
[Fri Sep 30 09:32:45 2011] Updating aperture counts using extracted products
[Fri Sep 30 09:32:45 2011] Error reading totcts from fullrun_ccd7_acisf10907_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Sep 30 09:32:45 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 09:32:45 2011] Using photon index=1.80, rate=0.00202, arf fullrun_ccd7_acisf10907_pi14-548_pass1_cl_src2.arf
[Fri Sep 30 09:32:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 09:32:46 2011] Updating source flux to 2.1e-14
[Fri Sep 30 09:32:54 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting