[Fri Oct  7 12:52:11 2011] Detection parameters:
  Position = (443.7, 645.4) = 0 24 52.84 64 8 14.7
  Extent = 0.7" x 0.7", rotation angle = 40 degrees
  Source counts = 643.8 +/- 40.0
  Background counts = 953.2
  Rate = 0.02 +/- 0.001

[Fri Oct  7 12:52:55 2011] Off-axis axis estimate = 3.15'
[Fri Oct  7 13:01:27 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:01:27 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Fri Oct  7 13:01:27 2011] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.743
[Fri Oct  7 13:01:27 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 0.61"
[Fri Oct  7 13:01:28 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src22.ximg exists
[Fri Oct  7 13:01:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src22.csv
[Fri Oct  7 13:01:28 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src22_1.ximg exists
[Fri Oct  7 13:01:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src22.csv
[Fri Oct  7 13:01:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:01:31 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Fri Oct  7 13:01:31 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Fri Oct  7 13:01:31 2011] Fit fullrun_ccd3_acisf10906_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Fri Oct  7 13:02:48 2011] Spatial fit model total counts = 1952.250000, observed total counts = 1953.000000
[Fri Oct  7 13:02:48 2011] Offset between fit and detection position for source 38 = 3.190961 pixels
[Fri Oct  7 13:02:48 2011] 1946.339000 total counts/ 1572.160000 bgd. counts: snr = 9.436937
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 3.190961 pixels
  Position = (446.9, 646.0) = 0 24 52.64 64 8 14.8
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 374.2 +/- 44.1
  Background counts = 1572.2
  Rate = 0.009 +/- 0.001
[Fri Oct  7 13:02:49 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:02:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:02:49 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:02:49 2011] Source does appear to be extended
[Fri Oct  7 13:02:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:04:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:04:38 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Fri Oct  7 13:04:38 2011] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.112
[Fri Oct  7 13:04:38 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 1.50"
[Fri Oct  7 13:04:41 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src22.ximg exists
[Fri Oct  7 13:04:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src22.csv
[Fri Oct  7 13:04:41 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src22_1.ximg exists
[Fri Oct  7 13:04:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src22.csv
[Fri Oct  7 13:04:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:04:48 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Fri Oct  7 13:04:48 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Oct  7 13:04:48 2011] Fit fullrun_ccd3_acisf10906_pi14-548_cl_pass1_tfrozen_src22 appears to have run properly
[Fri Oct  7 13:06:00 2011] Spatial fit model total counts = 2869.630000, observed total counts = 2860.000000
[Fri Oct  7 13:06:00 2011] Offset between fit and detection position for source 38 = 5.444727 pixels
[Fri Oct  7 13:06:00 2011] 2809.160000 total counts/ 1431.720000 bgd. counts: snr = 36.403542
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 5.444727 pixels
  Position = (451.8, 648.2) = 0 24 52.26 64 8 15.8
  Extent = 3.0 (3.0-6.0)", rotation angle = 0
  Source counts = 1377.4 +/- 53.0
  Background counts = 1431.7
  Rate = 0.03 +/- 0.001
[Fri Oct  7 13:06:01 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:06:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:06:01 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:06:01 2011] Source does appear to be extended
[Fri Oct  7 13:06:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:25:12 2011] Not overwriting source region fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src38_src.reg
[Fri Oct  7 13:25:12 2011] Extracting stamp from image fullrun_ccd3_acisf10906_pi14-548_cl_sm2.00.img.gz, (315, 511) - (589, 785)
[Fri Oct  7 13:25:12 2011] Writing fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src38.gif
[Fri Oct  7 13:26:38 2011] ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src38_src.evt and ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src38_bgd.evt exist, delete to re-create
[Fri Oct  7 13:26:38 2011] Size of ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src38_src.evt.gz[events] = 12424 counts
[Fri Oct  7 13:26:38 2011] Mean chipx,y = (738.21, 692.50)
[Fri Oct  7 13:26:38 2011] Mean tdetx,y = (4439.50, 3799.21)
[Fri Oct  7 13:26:38 2011] chipx,y range = (700.00-781.00, 652.00-733.00)
[Fri Oct  7 13:26:38 2011] Size of ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src38_bgd.evt.gz[events] = 70616 counts
[Fri Oct  7 13:26:38 2011] ../../acisf10906/products/images/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src38_src.img and ../../acisf10906/products/images/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src38_bgd.img exist, delete to re-create
[Fri Oct  7 13:26:38 2011] ../../acisf10906/products/spectra/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src38_src.pi and ../../acisf10906/products/spectra/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src38_bgd.pi exist, delete to re-create
[Fri Oct  7 13:26:41 2011] ../../acisf10906/products/lightcurves/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src38_src.lc and ../../acisf10906/products/lightcurves/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src38_bgd.lc exist, delete to re-create
[Fri Oct  7 13:39:14 2011] Keeping rmf generated by specextract
[Fri Oct  7 13:39:14 2011] 195.14
[Fri Oct  7 13:40:04 2011] Updating aperture counts using extracted products
[Fri Oct  7 13:40:04 2011] Error reading totcts from fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src38_src.pi.gz
[Fri Oct  7 13:40:11 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 13:40:11 2011] Using photon index=1.80, rate=0.0335, arf fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src38.arf
[Fri Oct  7 13:40:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 13:40:11 2011] Updating source flux to 4.8e-13