[Fri Oct  7 12:52:08 2011] Detection parameters:
  Position = (507.8, 852.4) = 0 24 47.99 64 9 56.5
  Extent = 0.7" x 0.7", rotation angle = 170 degrees
  Source counts = 306.1 +/- 28.3
  Background counts = 493.9
  Rate = 0.007 +/- 0.0007

[Fri Oct  7 12:52:55 2011] Off-axis axis estimate = 3.91'
[Fri Oct  7 13:01:27 2011] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:01:27 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Fri Oct  7 13:01:27 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881
[Fri Oct  7 13:01:27 2011] Giving source the simple spatial ID 63 for pass 0, mean size = 0.80"
[Fri Oct  7 13:01:29 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src63.ximg exists
[Fri Oct  7 13:01:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src63.csv
[Fri Oct  7 13:01:29 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src63_1.ximg exists
[Fri Oct  7 13:01:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src63.csv
[Fri Oct  7 13:01:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:01:32 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_tfrozen_src63.ximg exists
[Fri Oct  7 13:01:32 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_tfrozen_src63_1.ximg exists
[Fri Oct  7 13:01:32 2011] Fit fullrun_ccd3_acisf10906_pi14-548_cl_pass0_tfrozen_src63 appears to have run properly
[Fri Oct  7 13:02:49 2011] Spatial fit model total counts = 1886.000000, observed total counts = 1886.000000
[Fri Oct  7 13:02:49 2011] Offset between fit and detection position for source 14 = 1.971942 pixels
[Fri Oct  7 13:02:49 2011] 1875.134000 total counts/ 1733.850000 bgd. counts: snr = 3.393026
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 1.971942 pixels
  Position = (509.7, 851.9) = 0 24 47.88 64 9 56.0
  Extent = 1.0 (0.4-1.6)", rotation angle = 0
  Source counts = 141.3 +/- 43.3
  Background counts = 1733.8
  Rate = 0.003 +/- 0.001
[Fri Oct  7 13:02:49 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:02:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:02:49 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:02:49 2011] Source does appear to be extended
[Fri Oct  7 13:02:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:04:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:04:38 2011] Initial guess for spatial extent in simple fitting = 1.01"
[Fri Oct  7 13:04:38 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.957
[Fri Oct  7 13:04:38 2011] Giving source the simple spatial ID 61 for pass 1, mean size = 1.01"
[Fri Oct  7 13:04:41 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src61.ximg exists
[Fri Oct  7 13:04:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src61.csv
[Fri Oct  7 13:04:42 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src61_1.ximg exists
[Fri Oct  7 13:04:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src61.csv
[Fri Oct  7 13:04:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:04:49 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_tfrozen_src61.ximg exists
[Fri Oct  7 13:04:49 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_tfrozen_src61_1.ximg exists
[Fri Oct  7 13:04:49 2011] Fit fullrun_ccd3_acisf10906_pi14-548_cl_pass1_tfrozen_src61 appears to have run properly
[Fri Oct  7 13:06:01 2011] Spatial fit model total counts = 1840.740000, observed total counts = 1838.000000
[Fri Oct  7 13:06:01 2011] Offset between fit and detection position for source 14 = 0.534006 pixels
[Fri Oct  7 13:06:01 2011] 1830.388000 total counts/ 1608.850000 bgd. counts: snr = 5.523196
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.534006 pixels
  Position = (509.7, 851.4) = 0 24 47.88 64 9 55.7
  Extent = 1.3 (0.9-1.9)", rotation angle = 0
  Source counts = 221.5 +/- 42.8
  Background counts = 1608.8
  Rate = 0.005 +/- 0.001
[Fri Oct  7 13:06:01 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:06:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:06:01 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:06:01 2011] Source does appear to be extended
[Fri Oct  7 13:06:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:25:14 2011] Not overwriting source region fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src14_src.reg
[Fri Oct  7 13:25:14 2011] Extracting stamp from image fullrun_ccd3_acisf10906_pi14-548_cl_sm2.00.img.gz, (452, 794) - (567, 909)
[Fri Oct  7 13:25:14 2011] Writing fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src14.gif
[Fri Oct  7 13:28:54 2011] ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src14_src.evt and ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Fri Oct  7 13:28:54 2011] Size of ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src14_src.evt.gz[events] = 2373 counts
[Fri Oct  7 13:28:54 2011] Mean chipx,y = (544.51, 768.89)
[Fri Oct  7 13:28:54 2011] Mean tdetx,y = (4363.11, 3605.51)
[Fri Oct  7 13:28:54 2011] chipx,y range = (517.00-569.00, 742.00-796.00)
[Fri Oct  7 13:28:54 2011] Size of ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 9146 counts
[Fri Oct  7 13:28:54 2011] ../../acisf10906/products/images/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src14_src.img and ../../acisf10906/products/images/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Fri Oct  7 13:28:54 2011] ../../acisf10906/products/spectra/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src14_src.pi and ../../acisf10906/products/spectra/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Fri Oct  7 13:28:58 2011] ../../acisf10906/products/lightcurves/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src14_src.lc and ../../acisf10906/products/lightcurves/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Fri Oct  7 13:39:19 2011] Keeping rmf generated by specextract
[Fri Oct  7 13:39:19 2011] 182.969
[Fri Oct  7 13:40:05 2011] Updating aperture counts using extracted products
[Fri Oct  7 13:40:05 2011] Error reading totcts from fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src14_src.pi.gz
[Fri Oct  7 13:40:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 13:40:12 2011] Using photon index=1.80, rate=0.00539, arf fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src14.arf
[Fri Oct  7 13:40:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 13:40:12 2011] Updating source flux to 8.1e-14