[Fri Oct  7 12:52:08 2011] Detection parameters:
  Position = (309.3, 642.5) = 0 25 2.95 64 8 13.4
  Extent = 0.9" x 0.8", rotation angle = 15 degrees
  Source counts = 301.2 +/- 31.2
  Background counts = 669.8
  Rate = 0.007 +/- 0.0008

[Fri Oct  7 12:52:55 2011] Off-axis axis estimate = 2.06'
[Fri Oct  7 13:01:27 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:01:27 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Oct  7 13:01:27 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.172
[Fri Oct  7 13:01:27 2011] Giving source the simple spatial ID 65 for pass 0, mean size = 0.44"
[Fri Oct  7 13:01:29 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src65.ximg exists
[Fri Oct  7 13:01:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src65.csv
[Fri Oct  7 13:01:29 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src65_1.ximg exists
[Fri Oct  7 13:01:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src65.csv
[Fri Oct  7 13:01:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:01:32 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_tfrozen_src65.ximg exists
[Fri Oct  7 13:01:32 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_tfrozen_src65_1.ximg exists
[Fri Oct  7 13:01:32 2011] Fit fullrun_ccd3_acisf10906_pi14-548_cl_pass0_tfrozen_src65 appears to have run properly
[Fri Oct  7 13:02:49 2011] Spatial fit model total counts = 946.999000, observed total counts = 947.000000
[Fri Oct  7 13:02:49 2011] Offset between fit and detection position for source 10 = 0.637315 pixels
[Fri Oct  7 13:02:49 2011] 951.656300 total counts/ 854.047000 bgd. counts: snr = 3.340030
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.637315 pixels
  Position = (308.7, 642.7) = 0 25 3.03 64 8 13.2
  Extent = 0.8 (0.5-1.4)", rotation angle = 0
  Source counts = 97.6 +/- 30.8
  Background counts = 854.0
  Rate = 0.002 +/- 0.0008
[Fri Oct  7 13:02:49 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:02:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:02:49 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:02:49 2011] Source does appear to be extended
[Fri Oct  7 13:02:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:04:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:04:38 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Fri Oct  7 13:04:38 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Fri Oct  7 13:04:38 2011] Giving source the simple spatial ID 63 for pass 1, mean size = 0.82"
[Fri Oct  7 13:04:42 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src63.ximg exists
[Fri Oct  7 13:04:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src63.csv
[Fri Oct  7 13:04:42 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src63_1.ximg exists
[Fri Oct  7 13:04:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src63.csv
[Fri Oct  7 13:04:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:04:49 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_tfrozen_src63.ximg exists
[Fri Oct  7 13:04:49 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_tfrozen_src63_1.ximg exists
[Fri Oct  7 13:04:49 2011] Fit fullrun_ccd3_acisf10906_pi14-548_cl_pass1_tfrozen_src63 appears to have run properly
[Fri Oct  7 13:06:01 2011] Spatial fit model total counts = 945.997000, observed total counts = 947.000000
[Fri Oct  7 13:06:01 2011] Offset between fit and detection position for source 10 = 0.096799 pixels
[Fri Oct  7 13:06:01 2011] 951.880900 total counts/ 858.203000 bgd. counts: snr = 3.197733
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.096799 pixels
  Position = (308.6, 642.7) = 0 25 3.04 64 8 13.2
  Extent = 0.8 (0.5-1.6)", rotation angle = 0
  Source counts = 93.7 +/- 30.9
  Background counts = 858.2
  Rate = 0.002 +/- 0.0008
[Fri Oct  7 13:06:01 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:06:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:06:01 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:06:01 2011] Source does appear to be extended
[Fri Oct  7 13:06:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:25:14 2011] Not overwriting source region fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src10_src.reg
[Fri Oct  7 13:25:14 2011] Extracting stamp from image fullrun_ccd3_acisf10906_pi14-548_cl_sm2.00.img.gz, (272, 606) - (345, 679)
[Fri Oct  7 13:25:14 2011] Writing fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src10.gif
[Fri Oct  7 13:29:02 2011] ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src10_src.evt and ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Oct  7 13:29:02 2011] Size of ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src10_src.evt.gz[events] = 561 counts
[Fri Oct  7 13:29:02 2011] Mean chipx,y = (831.93, 803.09)
[Fri Oct  7 13:29:02 2011] Mean tdetx,y = (4328.91, 3892.93)
[Fri Oct  7 13:29:02 2011] chipx,y range = (810.00-854.00, 781.00-826.00)
[Fri Oct  7 13:29:02 2011] Size of ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 3497 counts
[Fri Oct  7 13:29:02 2011] ../../acisf10906/products/images/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src10_src.img and ../../acisf10906/products/images/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Oct  7 13:29:02 2011] ../../acisf10906/products/spectra/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src10_src.pi and ../../acisf10906/products/spectra/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Oct  7 13:29:02 2011] Not generating rmf since there are only 93 counts
[Fri Oct  7 13:29:05 2011] ../../acisf10906/products/lightcurves/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src10_src.lc and ../../acisf10906/products/lightcurves/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Oct  7 13:39:19 2011] 200.515
[Fri Oct  7 13:40:05 2011] Updating aperture counts using extracted products
[Fri Oct  7 13:40:05 2011] Error reading totcts from fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Oct  7 13:40:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 13:40:12 2011] Using photon index=1.80, rate=0.00228, arf fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src10.arf
[Fri Oct  7 13:40:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 13:40:12 2011] Updating source flux to 3.2e-14
[Fri Oct  7 14:09:07 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting