[Fri Oct  7 12:52:07 2011] Detection parameters:
  Position = (337.5, 965.5) = 0 25 0.79 64 10 52.3
  Extent = 1.0" x 0.9", rotation angle = 141 degrees
  Source counts = 2065.1 +/- 64.3
  Background counts = 2071.9
  Rate = 0.05 +/- 0.002

[Fri Oct  7 12:52:55 2011] Off-axis axis estimate = 3.23'
[Fri Oct  7 13:01:27 2011] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:01:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 13:01:27 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Fri Oct  7 13:01:27 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.712
[Fri Oct  7 13:01:27 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.63"
[Fri Oct  7 13:01:28 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 13:01:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 13:01:28 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 13:01:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 13:01:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10906_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:01:30 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 13:01:30 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 13:01:30 2011] Fit fullrun_ccd3_acisf10906_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 13:02:48 2011] Spatial fit model total counts = 4950.370000, observed total counts = 4950.000000
[Fri Oct  7 13:02:48 2011] Offset between fit and detection position for source 1 = 1.411288 pixels
[Fri Oct  7 13:02:48 2011] 4966.636000 total counts/ 4472.930000 bgd. counts: snr = 7.381971
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.411288 pixels
  Position = (336.5, 966.5) = 0 25 0.91 64 10 52.5
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 493.7 +/- 70.5
  Background counts = 4472.9
  Rate = 0.01 +/- 0.002
[Fri Oct  7 13:02:49 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:02:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:02:49 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:02:49 2011] Source does appear to be extended
[Fri Oct  7 13:02:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:04:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:04:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 13:04:38 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Fri Oct  7 13:04:38 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Fri Oct  7 13:04:38 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.50"
[Fri Oct  7 13:04:40 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 13:04:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 13:04:40 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 13:04:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 13:04:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10906_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:04:47 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 13:04:47 2011] fullrun_ccd3_acisf10906_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 13:04:47 2011] Fit fullrun_ccd3_acisf10906_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 13:06:00 2011] Spatial fit model total counts = 9859.430000, observed total counts = 9853.000000
[Fri Oct  7 13:06:00 2011] Offset between fit and detection position for source 1 = 4.763353 pixels
[Fri Oct  7 13:06:00 2011] 9708.480000 total counts/ 6816.460000 bgd. counts: snr = 35.028525
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.763353 pixels
  Position = (339.2, 962.6) = 0 25 0.70 64 10 50.6
  Extent = 3.0 (3.0-6.0)", rotation angle = 0
  Source counts = 2892.0 +/- 98.5
  Background counts = 6816.5
  Rate = 0.07 +/- 0.002
[Fri Oct  7 13:06:01 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:06:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:06:01 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:06:01 2011] Source does appear to be extended
[Fri Oct  7 13:06:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:06:01 2011] Source is confused with source 72
[Fri Oct  7 13:25:11 2011] Not overwriting source region fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1_src.reg
[Fri Oct  7 13:25:11 2011] Extracting stamp from image fullrun_ccd3_acisf10906_pi14-548_cl_sm2.00.img.gz, (202, 825) - (476, 1100)
[Fri Oct  7 13:25:11 2011] Writing fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1.gif
[Fri Oct  7 13:25:26 2011] ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1_src.evt and ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct  7 13:25:26 2011] Size of ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1_src.evt.gz[events] = 28699 counts
[Fri Oct  7 13:25:26 2011] Mean chipx,y = (558.35, 971.84)
[Fri Oct  7 13:25:26 2011] Mean tdetx,y = (4160.16, 3619.35)
[Fri Oct  7 13:25:26 2011] chipx,y range = (517.00-599.00, 930.00-1013.00)
[Fri Oct  7 13:25:26 2011] Size of ../../acisf10906/products/events/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 63470 counts
[Fri Oct  7 13:25:26 2011] ../../acisf10906/products/images/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1_src.img and ../../acisf10906/products/images/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct  7 13:25:26 2011] ../../acisf10906/products/spectra/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1_src.pi and ../../acisf10906/products/spectra/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct  7 13:25:29 2011] ../../acisf10906/products/lightcurves/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1_src.lc and ../../acisf10906/products/lightcurves/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct  7 13:39:13 2011] Keeping rmf generated by specextract
[Fri Oct  7 13:39:13 2011] 188.333
[Fri Oct  7 13:40:03 2011] Updating aperture counts using extracted products
[Fri Oct  7 13:40:03 2011] Error reading totcts from fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct  7 13:40:10 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 13:40:10 2011] Using photon index=1.80, rate=0.0703, arf fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 13:40:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 13:40:10 2011] Updating source flux to 1e-12
[Fri Oct  7 14:09:07 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Oct  7 14:19:20 2011] Reading fit data from acisf10906/analysis//spectral/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct  7 14:19:20 2011] Spectral fit parameter nH value = 4.34412e+21
[Fri Oct  7 14:19:20 2011] Spectral fit parameter PhoIndex value = 3.47798
[Fri Oct  7 14:19:20 2011] Failed to get F(0.3-8.0) from acisf10906/analysis//spectral/fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 14:19:20 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 14:19:20 2011] Using Nh = 4.3e+21, photon index=3.48, rate=0.0703, arf fullrun_ccd3_acisf10906_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 14:19:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 14:19:20 2011] Updating source flux to 5.5e-13