[Fri Oct  7 12:51:38 2011] Detection parameters:
  Position = (661.3, 409.8) = 0 25 38.01 64 11 22.5
  Extent = 2.0" x 0.7", rotation angle = 70 degrees
  Source counts = 358.2 +/- 27.4
  Background counts = 394.8
  Rate = 0.009 +/- 0.0007

[Fri Oct  7 12:52:07 2011] Off-axis axis estimate = 3.33'
[Fri Oct  7 13:01:19 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:01:19 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Fri Oct  7 13:01:19 2011] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.675
[Fri Oct  7 13:01:19 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.65"
[Fri Oct  7 13:01:21 2011] fullrun_ccd2_acisf10906_pi14-548_cl_pass0_src21.ximg exists
[Fri Oct  7 13:01:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10906_pi14-548_cl_pass0_src21.csv
[Fri Oct  7 13:01:21 2011] fullrun_ccd2_acisf10906_pi14-548_cl_pass0_src21_1.ximg exists
[Fri Oct  7 13:01:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10906_pi14-548_cl_pass0_src21.csv
[Fri Oct  7 13:01:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10906_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10906_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:01:24 2011] fullrun_ccd2_acisf10906_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Fri Oct  7 13:01:24 2011] fullrun_ccd2_acisf10906_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Oct  7 13:01:24 2011] Fit fullrun_ccd2_acisf10906_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Fri Oct  7 13:02:34 2011] Spatial fit model total counts = 2104.860000, observed total counts = 2107.000000
[Fri Oct  7 13:02:34 2011] Offset between fit and detection position for source 17 = 1.554694 pixels
[Fri Oct  7 13:02:34 2011] 2094.213000 total counts/ 1860.280000 bgd. counts: snr = 5.423783
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.554694 pixels
  Position = (660.8, 411.2) = 0 25 38.09 64 11 22.9
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 233.9 +/- 45.8
  Background counts = 1860.3
  Rate = 0.006 +/- 0.001
[Fri Oct  7 13:02:34 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:02:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:02:34 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:02:34 2011] Source does appear to be extended
[Fri Oct  7 13:02:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:04:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:04:27 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Fri Oct  7 13:04:27 2011] source mask rpix=3.0, npix_max = 50, mask sum = 41, frac = 0.814
[Fri Oct  7 13:04:27 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 1.50"
[Fri Oct  7 13:04:28 2011] fullrun_ccd2_acisf10906_pi14-548_cl_pass1_src20.ximg exists
[Fri Oct  7 13:04:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10906_pi14-548_cl_pass1_src20.csv
[Fri Oct  7 13:04:28 2011] fullrun_ccd2_acisf10906_pi14-548_cl_pass1_src20_1.ximg exists
[Fri Oct  7 13:04:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10906_pi14-548_cl_pass1_src20.csv
[Fri Oct  7 13:04:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10906_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10906_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:04:35 2011] fullrun_ccd2_acisf10906_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Fri Oct  7 13:04:35 2011] fullrun_ccd2_acisf10906_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Oct  7 13:04:35 2011] Fit fullrun_ccd2_acisf10906_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Fri Oct  7 13:05:44 2011] Spatial fit model total counts = 2281.290000, observed total counts = 2281.000000
[Fri Oct  7 13:05:44 2011] Offset between fit and detection position for source 17 = 1.982663 pixels
[Fri Oct  7 13:05:44 2011] Warning, changing simple spatial fit ID from 20 to 14
[Fri Oct  7 13:05:44 2011] 2185.020000 total counts/ 1145.730000 bgd. counts: snr = 30.704046
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.982663 pixels
  Position = (659.1, 410.2) = 0 25 38.22 64 11 22.5
  Extent = 3.0 (3.0-6.0)", rotation angle = 0
  Source counts = 1039.3 +/- 46.7
  Background counts = 1145.7
  Rate = 0.03 +/- 0.001
[Fri Oct  7 13:05:45 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:05:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:05:45 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:05:45 2011] Source does appear to be extended
[Fri Oct  7 13:05:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:05:45 2011] Source is confused with source 16
[Fri Oct  7 13:17:44 2011] Not overwriting source region fullrun_ccd2_acisf10906_pi14-548_pass1_cl_src17_src.reg
[Fri Oct  7 13:17:44 2011] Extracting stamp from image fullrun_ccd2_acisf10906_pi14-548_cl_sm2.00.img.gz, (522, 273) - (796, 547)
[Fri Oct  7 13:17:44 2011] Writing fullrun_ccd2_acisf10906_pi14-548_pass1_cl_src17.gif
[Fri Oct  7 13:19:01 2011] ../../acisf10906/products/events/fullrun_ccd2_acisf10906_pi14-548_pass1_cl_src17_src.evt and ../../acisf10906/products/events/fullrun_ccd2_acisf10906_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Fri Oct  7 13:19:01 2011] Size of ../../acisf10906/products/events/fullrun_ccd2_acisf10906_pi14-548_pass1_cl_src17_src.evt.gz[events] = 9525 counts
[Fri Oct  7 13:19:01 2011] Mean chipx,y = (215.62, 664.59)
[Fri Oct  7 13:19:01 2011] Mean tdetx,y = (3725.59, 3870.38)
[Fri Oct  7 13:19:01 2011] chipx,y range = (176.00-258.00, 621.00-703.00)
[Fri Oct  7 13:19:01 2011] Size of ../../acisf10906/products/events/fullrun_ccd2_acisf10906_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 46080 counts
[Fri Oct  7 13:19:01 2011] ../../acisf10906/products/images/fullrun_ccd2_acisf10906_pi14-548_pass1_cl_src17_src.img and ../../acisf10906/products/images/fullrun_ccd2_acisf10906_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Fri Oct  7 13:19:01 2011] ../../acisf10906/products/spectra/fullrun_ccd2_acisf10906_pi14-548_pass1_cl_src17_src.pi and ../../acisf10906/products/spectra/fullrun_ccd2_acisf10906_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Fri Oct  7 13:19:04 2011] ../../acisf10906/products/lightcurves/fullrun_ccd2_acisf10906_pi14-548_pass1_cl_src17_src.lc and ../../acisf10906/products/lightcurves/fullrun_ccd2_acisf10906_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Fri Oct  7 13:25:04 2011] Keeping rmf generated by specextract
[Fri Oct  7 13:25:04 2011] 188.057
[Fri Oct  7 13:39:56 2011] Updating aperture counts using extracted products
[Fri Oct  7 13:39:56 2011] Error reading totcts from fullrun_ccd2_acisf10906_pi14-548_pass1_cl_src17_src.pi.gz
[Fri Oct  7 13:40:00 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 13:40:00 2011] Using photon index=1.80, rate=0.0253, arf fullrun_ccd2_acisf10906_pi14-548_pass1_cl_src17.arf
[Fri Oct  7 13:40:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 13:40:00 2011] Updating source flux to 3.7e-13
[Fri Oct  7 13:58:56 2011] Flag c found in src. 17 procflags, skipping spectral fitting