[Fri Oct  7 12:51:27 2011] Detection parameters:
  Position = (619.3, 1304.3) = 0 25 26.25 64 6 58.6
  Extent = 0.5" x 0.5", rotation angle = 40 degrees
  Source counts = 54.2 +/- 12.8
  Background counts = 109.8
  Rate = 0.001 +/- 0.0003

[Fri Oct  7 12:51:36 2011] Off-axis axis estimate = 1.67'
[Fri Oct  7 13:01:01 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:01:01 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Fri Oct  7 13:01:01 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.295
[Fri Oct  7 13:01:01 2011] Giving source the simple spatial ID 94 for pass 0, mean size = 0.40"
[Fri Oct  7 13:01:14 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src94.ximg exists
[Fri Oct  7 13:01:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src94.csv
[Fri Oct  7 13:01:14 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src94_1.ximg exists
[Fri Oct  7 13:01:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src94.csv
[Fri Oct  7 13:01:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src94_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:01:18 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src94.ximg exists
[Fri Oct  7 13:01:18 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src94_1.ximg exists
[Fri Oct  7 13:01:18 2011] Fit fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src94 appears to have run properly
[Fri Oct  7 13:02:19 2011] Spatial fit model total counts = 795.149000, observed total counts = 801.000000
[Fri Oct  7 13:02:19 2011] Offset between fit and detection position for source 76 = 0.320059 pixels
[Fri Oct  7 13:02:19 2011] 796.046390 total counts/ 786.177000 bgd. counts: snr = 0.351990
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 0.320059 pixels
  Position = (619.1, 1304.6) = 0 25 26.30 64 6 58.5
  Extent = 0.1 (0.1-0.2)", rotation angle = 0
  Source counts = 9.9 +/- 28.2
  Background counts = 786.2
  Rate = 0.0002 +/- 0.0007
  Deleting source due to low Poisson probability