[Fri Oct 7 12:51:24 2011] Detection parameters: Position = (703.3, 1116.3) = 0 25 19.94 64 5 26.1 Extent = 1.0" x 0.6", rotation angle = 81 degrees Source counts = 57.3 +/- 14.9 Background counts = 163.7 Rate = 0.001 +/- 0.0004 [Fri Oct 7 12:51:36 2011] Off-axis axis estimate = 3.13' [Fri Oct 7 13:01:01 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting [Fri Oct 7 13:01:01 2011] Initial guess for spatial extent in simple fitting = 0.61" [Fri Oct 7 13:01:01 2011] source mask rpix=1.2, npix_max = 12, mask sum = 8, frac = 0.664 [Fri Oct 7 13:01:01 2011] Giving source the simple spatial ID 89 for pass 0, mean size = 0.61" [Fri Oct 7 13:01:14 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src89.ximg exists [Fri Oct 7 13:01:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src89.csv [Fri Oct 7 13:01:14 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src89_1.ximg exists [Fri Oct 7 13:01:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src89.csv [Fri Oct 7 13:01:14 2011] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src89_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Oct 7 13:01:18 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src89.ximg exists [Fri Oct 7 13:01:18 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src89_1.ximg exists [Fri Oct 7 13:01:18 2011] Fit fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src89 appears to have run properly [Fri Oct 7 13:02:19 2011] Spatial fit model total counts = 1107.370000, observed total counts = 1081.000000 [Fri Oct 7 13:02:19 2011] Offset between fit and detection position for source 49 = 1.144033 pixels [Fri Oct 7 13:02:19 2011] 1126.749800 total counts/ 1083.410000 bgd. counts: snr = 1.316711 Spatial fit parameters: Offset between fit and detection position for source 49 = 1.144033 pixels Position = (704.2, 1117.0) = 0 25 19.91 64 5 26.2 Extent = 0.3 (0.2-0.4)", rotation angle = 0 Source counts = 43.3 +/- 33.6 Background counts = 1083.4 Rate = 0.001 +/- 0.0008 Deleting source due to low Poisson probability