[Fri Oct  7 12:51:19 2011] Detection parameters:
  Position = (912.4, 1103.4) = 0 25 4.24 64 5 19.7
  Extent = 1.0" x 0.8", rotation angle = 80 degrees
  Source counts = 60.6 +/- 14.6
  Background counts = 153.4
  Rate = 0.001 +/- 0.0004

[Fri Oct  7 12:51:36 2011] Off-axis axis estimate = 3.75'
[Fri Oct  7 13:01:01 2011] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:01:01 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Fri Oct  7 13:01:01 2011] source mask rpix=1.5, npix_max = 16, mask sum = 13, frac = 0.782
[Fri Oct  7 13:01:01 2011] Giving source the simple spatial ID 85 for pass 0, mean size = 0.76"
[Fri Oct  7 13:01:14 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src85.ximg exists
[Fri Oct  7 13:01:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src85.csv
[Fri Oct  7 13:01:14 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src85_1.ximg exists
[Fri Oct  7 13:01:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src85.csv
[Fri Oct  7 13:01:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:01:17 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src85.ximg exists
[Fri Oct  7 13:01:17 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src85_1.ximg exists
[Fri Oct  7 13:01:17 2011] Fit fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src85 appears to have run properly
[Fri Oct  7 13:02:19 2011] Spatial fit model total counts = 774.312000, observed total counts = 773.000000
[Fri Oct  7 13:02:19 2011] Offset between fit and detection position for source 4 = 2.236657 pixels
[Fri Oct  7 13:02:19 2011] 795.780000 total counts/ 694.447000 bgd. counts: snr = 3.845310
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.236657 pixels
  Position = (911.3, 1105.3) = 0 25 4.37 64 5 20.4
  Extent = 1.1 (0.5-1.5)", rotation angle = 0
  Source counts = 101.3 +/- 28.2
  Background counts = 694.4
  Rate = 0.002 +/- 0.0007
[Fri Oct  7 13:02:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:02:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:02:19 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:02:19 2011] Source does appear to be extended
[Fri Oct  7 13:02:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:04:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:04:14 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Fri Oct  7 13:04:14 2011] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.701
[Fri Oct  7 13:04:14 2011] Giving source the simple spatial ID 77 for pass 1, mean size = 1.13"
[Fri Oct  7 13:04:21 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass1_src77.ximg exists
[Fri Oct  7 13:04:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass1_src77.csv
[Fri Oct  7 13:04:21 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass1_src77_1.ximg exists
[Fri Oct  7 13:04:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass1_src77.csv
[Fri Oct  7 13:04:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10906_pi14-548_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10906_pi14-548_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:04:24 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass1_tfrozen_src77.ximg exists
[Fri Oct  7 13:04:25 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass1_tfrozen_src77_1.ximg exists
[Fri Oct  7 13:04:25 2011] Fit fullrun_ccd1_acisf10906_pi14-548_cl_pass1_tfrozen_src77 appears to have run properly
[Fri Oct  7 13:05:31 2011] Spatial fit model total counts = 790.241000, observed total counts = 785.000000
[Fri Oct  7 13:05:31 2011] Offset between fit and detection position for source 4 = 0.237899 pixels
[Fri Oct  7 13:05:31 2011] 817.431000 total counts/ 712.974000 bgd. counts: snr = 3.912017
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.237899 pixels
  Position = (911.2, 1105.1) = 0 25 4.37 64 5 20.3
  Extent = 1.1 (0.5-2.0)", rotation angle = 0
  Source counts = 104.5 +/- 28.6
  Background counts = 713.0
  Rate = 0.003 +/- 0.0007
[Fri Oct  7 13:05:31 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:05:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:05:31 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:05:31 2011] Source does appear to be extended
[Fri Oct  7 13:05:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:11:47 2011] Not overwriting source region fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src4_src.reg
[Fri Oct  7 13:11:47 2011] Extracting stamp from image fullrun_ccd1_acisf10906_pi14-548_cl_sm2.00.img.gz, (860, 1054) - (962, 1156)
[Fri Oct  7 13:11:47 2011] Writing fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src4.gif
[Fri Oct  7 13:16:41 2011] ../../acisf10906/products/events/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src4_src.evt and ../../acisf10906/products/events/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Oct  7 13:16:41 2011] Size of ../../acisf10906/products/events/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src4_src.evt.gz[events] = 800 counts
[Fri Oct  7 13:16:41 2011] Mean chipx,y = (75.31, 604.67)
[Fri Oct  7 13:16:41 2011] Mean tdetx,y = (4527.33, 4182.31)
[Fri Oct  7 13:16:41 2011] chipx,y range = (56.00-100.00, 580.00-630.00)
[Fri Oct  7 13:16:41 2011] Size of ../../acisf10906/products/events/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 7113 counts
[Fri Oct  7 13:16:41 2011] ../../acisf10906/products/images/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src4_src.img and ../../acisf10906/products/images/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Oct  7 13:16:41 2011] ../../acisf10906/products/spectra/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src4_src.pi and ../../acisf10906/products/spectra/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Oct  7 13:16:44 2011] ../../acisf10906/products/lightcurves/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src4_src.lc and ../../acisf10906/products/lightcurves/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Oct  7 13:17:41 2011] Keeping rmf generated by specextract
[Fri Oct  7 13:17:41 2011] 194.07
[Fri Oct  7 13:39:52 2011] Updating aperture counts using extracted products
[Fri Oct  7 13:39:52 2011] Error reading totcts from fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Oct  7 13:39:55 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 13:39:55 2011] Using photon index=1.80, rate=0.00254, arf fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src4.arf
[Fri Oct  7 13:39:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 13:39:55 2011] Updating source flux to 3.6e-14