[Fri Oct  7 12:51:23 2011] Detection parameters:
  Position = (615.6, 1067.5) = 0 25 26.53 64 5 2.1
  Extent = 0.5" x 0.5", rotation angle = 176 degrees
  Source counts = 97.5 +/- 18.4
  Background counts = 242.5
  Rate = 0.002 +/- 0.0004

[Fri Oct  7 12:51:36 2011] Off-axis axis estimate = 3.57'
[Fri Oct  7 13:01:01 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:01:01 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Fri Oct  7 13:01:01 2011] source mask rpix=1.4, npix_max = 15, mask sum = 12, frac = 0.793
[Fri Oct  7 13:01:01 2011] Giving source the simple spatial ID 49 for pass 0, mean size = 0.71"
[Fri Oct  7 13:01:13 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src49.ximg exists
[Fri Oct  7 13:01:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src49.csv
[Fri Oct  7 13:01:13 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src49_1.ximg exists
[Fri Oct  7 13:01:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src49.csv
[Fri Oct  7 13:01:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:01:17 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src49.ximg exists
[Fri Oct  7 13:01:17 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src49_1.ximg exists
[Fri Oct  7 13:01:17 2011] Fit fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src49 appears to have run properly
[Fri Oct  7 13:02:19 2011] Spatial fit model total counts = 1055.650000, observed total counts = 1056.000000
[Fri Oct  7 13:02:19 2011] Offset between fit and detection position for source 35 = 0.938124 pixels
[Fri Oct  7 13:02:19 2011] 1076.777000 total counts/ 949.015000 bgd. counts: snr = 4.147297
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.938124 pixels
  Position = (614.7, 1067.9) = 0 25 26.63 64 5 2.0
  Extent = 1.5 (1.4-3.0)", rotation angle = 0
  Source counts = 127.8 +/- 32.8
  Background counts = 949.0
  Rate = 0.003 +/- 0.0008
[Fri Oct  7 13:02:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:02:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:02:19 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:02:19 2011] Source does appear to be extended
[Fri Oct  7 13:02:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:04:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:04:14 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Fri Oct  7 13:04:14 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Fri Oct  7 13:04:14 2011] Giving source the simple spatial ID 45 for pass 1, mean size = 1.50"
[Fri Oct  7 13:04:20 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass1_src45.ximg exists
[Fri Oct  7 13:04:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass1_src45.csv
[Fri Oct  7 13:04:20 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass1_src45_1.ximg exists
[Fri Oct  7 13:04:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass1_src45.csv
[Fri Oct  7 13:04:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10906_pi14-548_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10906_pi14-548_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:04:23 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass1_tfrozen_src45.ximg exists
[Fri Oct  7 13:04:23 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass1_tfrozen_src45_1.ximg exists
[Fri Oct  7 13:04:23 2011] Fit fullrun_ccd1_acisf10906_pi14-548_cl_pass1_tfrozen_src45 appears to have run properly
[Fri Oct  7 13:05:31 2011] Spatial fit model total counts = 1461.000000, observed total counts = 1461.000000
[Fri Oct  7 13:05:31 2011] Offset between fit and detection position for source 35 = 1.519304 pixels
[Fri Oct  7 13:05:31 2011] 1479.023000 total counts/ 1246.050000 bgd. counts: snr = 6.599908
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 1.519304 pixels
  Position = (616.2, 1068.2) = 0 25 26.52 64 5 2.2
  Extent = 2.2 (1.2-3.0)", rotation angle = 0
  Source counts = 233.0 +/- 38.5
  Background counts = 1246.0
  Rate = 0.006 +/- 0.0009
[Fri Oct  7 13:05:31 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:05:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:05:31 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:05:31 2011] Source does appear to be extended
[Fri Oct  7 13:05:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:11:46 2011] Not overwriting source region fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src35_src.reg
[Fri Oct  7 13:11:46 2011] Extracting stamp from image fullrun_ccd1_acisf10906_pi14-548_cl_sm2.00.img.gz, (516, 968) - (717, 1169)
[Fri Oct  7 13:11:46 2011] Writing fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src35.gif
[Fri Oct  7 13:14:47 2011] ../../acisf10906/products/events/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src35_src.evt and ../../acisf10906/products/events/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src35_bgd.evt exist, delete to re-create
[Fri Oct  7 13:14:48 2011] Size of ../../acisf10906/products/events/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src35_src.evt.gz[events] = 3707 counts
[Fri Oct  7 13:14:48 2011] Mean chipx,y = (283.25, 817.30)
[Fri Oct  7 13:14:48 2011] Mean tdetx,y = (4314.70, 4390.25)
[Fri Oct  7 13:14:48 2011] chipx,y range = (251.00-318.00, 783.00-852.00)
[Fri Oct  7 13:14:48 2011] Size of ../../acisf10906/products/events/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 35291 counts
[Fri Oct  7 13:14:48 2011] ../../acisf10906/products/images/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src35_src.img and ../../acisf10906/products/images/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src35_bgd.img exist, delete to re-create
[Fri Oct  7 13:14:48 2011] ../../acisf10906/products/spectra/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src35_src.pi and ../../acisf10906/products/spectra/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src35_bgd.pi exist, delete to re-create
[Fri Oct  7 13:14:51 2011] ../../acisf10906/products/lightcurves/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src35_src.lc and ../../acisf10906/products/lightcurves/fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src35_bgd.lc exist, delete to re-create
[Fri Oct  7 13:17:40 2011] Keeping rmf generated by specextract
[Fri Oct  7 13:17:40 2011] 198.729
[Fri Oct  7 13:39:51 2011] Updating aperture counts using extracted products
[Fri Oct  7 13:39:51 2011] Error reading totcts from fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src35_src.pi.gz
[Fri Oct  7 13:39:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 13:39:54 2011] Using photon index=1.80, rate=0.00567, arf fullrun_ccd1_acisf10906_pi14-548_pass1_cl_src35.arf
[Fri Oct  7 13:39:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 13:39:54 2011] Updating source flux to 7.9e-14