[Fri Oct 7 12:51:23 2011] Detection parameters: Position = (461.3, 1067.6) = 0 25 38.11 64 5 2.1 Extent = 1.0" x 0.6", rotation angle = 46 degrees Source counts = 68.5 +/- 12.2 Background counts = 80.5 Rate = 0.002 +/- 0.0003 [Fri Oct 7 12:51:36 2011] Off-axis axis estimate = 3.97' [Fri Oct 7 13:01:01 2011] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting [Fri Oct 7 13:01:01 2011] Initial guess for spatial extent in simple fitting = 0.82" [Fri Oct 7 13:01:01 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065 [Fri Oct 7 13:01:01 2011] Giving source the simple spatial ID 82 for pass 0, mean size = 0.82" [Fri Oct 7 13:01:14 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src82.ximg exists [Fri Oct 7 13:01:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src82.csv [Fri Oct 7 13:01:14 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src82_1.ximg exists [Fri Oct 7 13:01:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src82.csv [Fri Oct 7 13:01:14 2011] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src82_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Oct 7 13:01:17 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src82.ximg exists [Fri Oct 7 13:01:17 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src82_1.ximg exists [Fri Oct 7 13:01:17 2011] Fit fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src82 appears to have run properly [Fri Oct 7 13:02:19 2011] Spatial fit model total counts = 539.972000, observed total counts = 540.000000 [Fri Oct 7 13:02:19 2011] Offset between fit and detection position for source 34 = 0.597056 pixels [Fri Oct 7 13:02:19 2011] 537.571300 total counts/ 507.704000 bgd. counts: snr = 1.325533 Spatial fit parameters: Offset between fit and detection position for source 34 = 0.597056 pixels Position = (461.9, 1067.5) = 0 25 38.10 64 5 1.8 Extent = 0.7 (0.2-1.6)", rotation angle = 0 Source counts = 29.9 +/- 23.2 Background counts = 507.7 Rate = 0.0007 +/- 0.0006 Deleting source due to low Poisson probability