[Fri Oct  7 12:51:20 2011] Detection parameters:
  Position = (708.9, 966.5) = 0 25 19.52 64 4 12.4
  Extent = 0.5" x 0.5", rotation angle = 128 degrees
  Source counts = 84.0 +/- 13.3
  Background counts = 93.0
  Rate = 0.002 +/- 0.0003

[Fri Oct  7 12:51:36 2011] Off-axis axis estimate = 4.36'
[Fri Oct  7 13:01:01 2011] Using EEF radius (= 0.95 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:01:01 2011] Initial guess for spatial extent in simple fitting = 0.95"
[Fri Oct  7 13:01:01 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.065
[Fri Oct  7 13:01:01 2011] Giving source the simple spatial ID 65 for pass 0, mean size = 0.95"
[Fri Oct  7 13:01:14 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src65.ximg exists
[Fri Oct  7 13:01:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src65.csv
[Fri Oct  7 13:01:14 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src65_1.ximg exists
[Fri Oct  7 13:01:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src65.csv
[Fri Oct  7 13:01:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10906_pi14-548_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:01:17 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src65.ximg exists
[Fri Oct  7 13:01:17 2011] fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src65_1.ximg exists
[Fri Oct  7 13:01:17 2011] Fit fullrun_ccd1_acisf10906_pi14-548_cl_pass0_tfrozen_src65 appears to have run properly
[Fri Oct  7 13:02:19 2011] Spatial fit model total counts = 512.682000, observed total counts = 512.000000
[Fri Oct  7 13:02:19 2011] Offset between fit and detection position for source 10 = 1.789626 pixels
[Fri Oct  7 13:02:19 2011] 517.550000 total counts/ 482.563000 bgd. counts: snr = 1.592684
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.789626 pixels
  Position = (710.6, 967.0) = 0 25 19.43 64 4 12.4
  Extent = 0.7 (0.4-1.9)", rotation angle = 0
  Source counts = 35.0 +/- 22.7
  Background counts = 482.6
  Rate = 0.0009 +/- 0.0006
  Deleting source due to low Poisson probability