[Fri Oct  7 12:51:08 2011] Detection parameters:
  Position = (1203.5, 914.5) = 0 25 44.29 64 8 46.8
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 24.9 +/- 9.7
  Background counts = 69.1
  Rate = 0.0006 +/- 0.0002

[Fri Oct  7 12:51:18 2011] Off-axis axis estimate = 2.49'
[Fri Oct  7 13:00:52 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:00:52 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Fri Oct  7 13:00:52 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.003
[Fri Oct  7 13:00:52 2011] Giving source the simple spatial ID 62 for pass 0, mean size = 0.49"
[Fri Oct  7 13:00:57 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src62.ximg exists
[Fri Oct  7 13:00:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src62.csv
[Fri Oct  7 13:00:57 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src62_1.ximg exists
[Fri Oct  7 13:00:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src62.csv
[Fri Oct  7 13:00:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:01:01 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src62.ximg exists
[Fri Oct  7 13:01:01 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src62_1.ximg exists
[Fri Oct  7 13:01:01 2011] Fit fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src62 appears to have run properly
[Fri Oct  7 13:02:03 2011] Spatial fit model total counts = 515.945000, observed total counts = 500.000000
[Fri Oct  7 13:02:03 2011] Offset between fit and detection position for source 72 = 3.550017 pixels
[Fri Oct  7 13:02:03 2011] 517.801700 total counts/ 455.720000 bgd. counts: snr = 2.908135
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 3.550017 pixels
  Position = (1204.4, 911.1) = 0 25 44.26 64 8 44.9
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 62.1 +/- 22.8
  Background counts = 455.7
  Rate = 0.002 +/- 0.0006
[Fri Oct  7 13:02:03 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:02:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:02:03 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:02:03 2011] Source does appear to be extended
[Fri Oct  7 13:02:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:02:03 2011] Source is confused with source 71
[Fri Oct  7 13:04:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:04:07 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Fri Oct  7 13:04:07 2011] source mask rpix=3.0, npix_max = 50, mask sum = 46, frac = 0.913
[Fri Oct  7 13:04:07 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 1.50"
[Fri Oct  7 13:04:10 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src49.ximg exists
[Fri Oct  7 13:04:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src49.csv
[Fri Oct  7 13:04:10 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src49_1.ximg exists
[Fri Oct  7 13:04:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src49.csv
[Fri Oct  7 13:04:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:04:12 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass1_tfrozen_src49.ximg exists
[Fri Oct  7 13:04:12 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass1_tfrozen_src49_1.ximg exists
[Fri Oct  7 13:04:12 2011] Fit fullrun_ccd0_acisf10906_pi14-548_cl_pass1_tfrozen_src49 appears to have run properly
[Fri Oct  7 13:05:18 2011] Spatial fit model total counts = 937.501000, observed total counts = 916.000000
[Fri Oct  7 13:05:18 2011] Offset between fit and detection position for source 72 = 5.263396 pixels
[Fri Oct  7 13:05:18 2011] 896.641000 total counts/ 676.839000 bgd. counts: snr = 8.448682
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 5.263396 pixels
  Position = (1202.1, 915.8) = 0 25 44.44 64 8 47.2
  Extent = 3.0 (3.0-6.0)", rotation angle = 0
  Source counts = 219.8 +/- 29.9
  Background counts = 676.8
  Rate = 0.005 +/- 0.0007
[Fri Oct  7 13:05:18 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:05:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:05:18 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:05:18 2011] Source does appear to be extended
[Fri Oct  7 13:05:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:07:06 2011] Not overwriting source region fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src72_src.reg
[Fri Oct  7 13:07:06 2011] Extracting stamp from image fullrun_ccd0_acisf10906_pi14-548_cl_sm2.00.img.gz, (1065, 779) - (1339, 1053)
[Fri Oct  7 13:07:06 2011] Writing fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src72.gif
[Fri Oct  7 13:09:31 2011] ../../acisf10906/products/events/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src72_src.evt and ../../acisf10906/products/events/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src72_bgd.evt exist, delete to re-create
[Fri Oct  7 13:09:31 2011] Size of ../../acisf10906/products/events/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src72_src.evt.gz[events] = 2817 counts
[Fri Oct  7 13:09:31 2011] Mean chipx,y = (962.58, 785.87)
[Fri Oct  7 13:09:31 2011] Mean tdetx,y = (3846.87, 4169.42)
[Fri Oct  7 13:09:31 2011] chipx,y range = (921.00-1002.00, 746.00-827.00)
[Fri Oct  7 13:09:31 2011] Size of ../../acisf10906/products/events/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src72_bgd.evt.gz[events] = 28361 counts
[Fri Oct  7 13:09:31 2011] ../../acisf10906/products/images/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src72_src.img and ../../acisf10906/products/images/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src72_bgd.img exist, delete to re-create
[Fri Oct  7 13:09:31 2011] ../../acisf10906/products/spectra/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src72_src.pi and ../../acisf10906/products/spectra/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src72_bgd.pi exist, delete to re-create
[Fri Oct  7 13:09:34 2011] ../../acisf10906/products/lightcurves/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src72_src.lc and ../../acisf10906/products/lightcurves/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src72_bgd.lc exist, delete to re-create
[Fri Oct  7 13:11:43 2011] Keeping rmf generated by specextract
[Fri Oct  7 13:11:43 2011] 198.063
[Fri Oct  7 13:39:47 2011] Updating aperture counts using extracted products
[Fri Oct  7 13:39:47 2011] Error reading totcts from fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src72_src.pi.gz
[Fri Oct  7 13:39:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 13:39:49 2011] Using photon index=1.80, rate=0.00535, arf fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src72.arf
[Fri Oct  7 13:39:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 13:39:49 2011] Updating source flux to 7.5e-14
[Fri Oct  7 13:40:31 2011] Flag c found in src. 72 procflags, skipping spectral fitting