[Fri Oct  7 12:51:05 2011] Detection parameters:
  Position = (1213.6, 629.5) = 0 25 43.50 64 6 26.6
  Extent = 0.7" x 0.6", rotation angle = 61 degrees
  Source counts = 76.6 +/- 15.0
  Background counts = 148.4
  Rate = 0.002 +/- 0.0004

[Fri Oct  7 12:51:18 2011] Off-axis axis estimate = 3.20'
[Fri Oct  7 13:00:52 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:00:52 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Fri Oct  7 13:00:52 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.723
[Fri Oct  7 13:00:52 2011] Giving source the simple spatial ID 34 for pass 0, mean size = 0.62"
[Fri Oct  7 13:00:56 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src34.ximg exists
[Fri Oct  7 13:00:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src34.csv
[Fri Oct  7 13:00:56 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src34_1.ximg exists
[Fri Oct  7 13:00:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src34.csv
[Fri Oct  7 13:00:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:01:00 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src34.ximg exists
[Fri Oct  7 13:01:00 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src34_1.ximg exists
[Fri Oct  7 13:01:00 2011] Fit fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src34 appears to have run properly
[Fri Oct  7 13:02:03 2011] Spatial fit model total counts = 452.000000, observed total counts = 452.000000
[Fri Oct  7 13:02:03 2011] Offset between fit and detection position for source 35 = 0.235357 pixels
[Fri Oct  7 13:02:03 2011] 460.352100 total counts/ 386.526000 bgd. counts: snr = 3.755092
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.235357 pixels
  Position = (1213.8, 629.6) = 0 25 43.52 64 6 26.4
  Extent = 1.0 (0.7-1.5)", rotation angle = 0
  Source counts = 73.8 +/- 21.5
  Background counts = 386.5
  Rate = 0.002 +/- 0.0005
[Fri Oct  7 13:02:03 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:02:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:02:03 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:02:03 2011] Source does appear to be extended
[Fri Oct  7 13:02:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:04:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:04:07 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Fri Oct  7 13:04:07 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.911
[Fri Oct  7 13:04:07 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 1.04"
[Fri Oct  7 13:04:09 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src31.ximg exists
[Fri Oct  7 13:04:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src31.csv
[Fri Oct  7 13:04:09 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src31_1.ximg exists
[Fri Oct  7 13:04:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src31.csv
[Fri Oct  7 13:04:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:04:12 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Fri Oct  7 13:04:12 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Oct  7 13:04:12 2011] Fit fullrun_ccd0_acisf10906_pi14-548_cl_pass1_tfrozen_src31 appears to have run properly
[Fri Oct  7 13:05:18 2011] Spatial fit model total counts = 505.999000, observed total counts = 506.000000
[Fri Oct  7 13:05:18 2011] Offset between fit and detection position for source 35 = 0.111206 pixels
[Fri Oct  7 13:05:18 2011] 512.713200 total counts/ 434.675000 bgd. counts: snr = 3.743044
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.111206 pixels
  Position = (1213.9, 629.6) = 0 25 43.52 64 6 26.4
  Extent = 1.1 (0.7-1.9)", rotation angle = 0
  Source counts = 78.0 +/- 22.6
  Background counts = 434.7
  Rate = 0.002 +/- 0.0006
[Fri Oct  7 13:05:18 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:05:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:05:18 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:05:18 2011] Source does appear to be extended
[Fri Oct  7 13:05:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:07:05 2011] Not overwriting source region fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src35_src.reg
[Fri Oct  7 13:07:05 2011] Extracting stamp from image fullrun_ccd0_acisf10906_pi14-548_cl_sm2.00.img.gz, (1165, 581) - (1263, 678)
[Fri Oct  7 13:07:05 2011] Writing fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src35.gif
[Fri Oct  7 13:08:40 2011] ../../acisf10906/products/events/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src35_src.evt and ../../acisf10906/products/events/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src35_bgd.evt exist, delete to re-create
[Fri Oct  7 13:08:40 2011] Size of ../../acisf10906/products/events/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src35_src.evt.gz[events] = 436 counts
[Fri Oct  7 13:08:40 2011] Mean chipx,y = (739.81, 969.71)
[Fri Oct  7 13:08:40 2011] Mean tdetx,y = (4030.71, 4392.19)
[Fri Oct  7 13:08:40 2011] chipx,y range = (716.00-763.00, 944.00-995.00)
[Fri Oct  7 13:08:40 2011] Size of ../../acisf10906/products/events/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 4121 counts
[Fri Oct  7 13:08:40 2011] ../../acisf10906/products/images/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src35_src.img and ../../acisf10906/products/images/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src35_bgd.img exist, delete to re-create
[Fri Oct  7 13:08:40 2011] ../../acisf10906/products/spectra/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src35_src.pi and ../../acisf10906/products/spectra/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src35_bgd.pi exist, delete to re-create
[Fri Oct  7 13:08:40 2011] Not generating rmf since there are only 78 counts
[Fri Oct  7 13:08:43 2011] ../../acisf10906/products/lightcurves/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src35_src.lc and ../../acisf10906/products/lightcurves/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src35_bgd.lc exist, delete to re-create
[Fri Oct  7 13:11:42 2011] 196.907
[Fri Oct  7 13:39:46 2011] Updating aperture counts using extracted products
[Fri Oct  7 13:39:46 2011] Error reading totcts from fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src35_src.pi.gz
[Fri Oct  7 13:39:48 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 13:39:48 2011] Using photon index=1.80, rate=0.0019, arf fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src35.arf
[Fri Oct  7 13:39:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 13:39:48 2011] Updating source flux to 2.7e-14
[Fri Oct  7 13:40:31 2011] Source 35 has fewer than 100.000000 counts, skipping spectral fitting