[Fri Oct  7 12:51:12 2011] Detection parameters:
  Position = (1236.0, 655.0) = 0 25 41.83 64 6 39.2
  Extent = 0.7" x 0.6", rotation angle = 101 degrees
  Source counts = 32.3 +/- 10.5
  Background counts = 78.7
  Rate = 0.0008 +/- 0.0003

[Fri Oct  7 12:51:18 2011] Off-axis axis estimate = 2.92'
[Fri Oct  7 13:00:52 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:00:52 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Fri Oct  7 13:00:52 2011] source mask rpix=1.1, npix_max = 10, mask sum = 16, frac = 1.472
[Fri Oct  7 13:00:52 2011] Giving source the simple spatial ID 89 for pass 0, mean size = 0.57"
[Fri Oct  7 13:00:59 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src89.ximg exists
[Fri Oct  7 13:00:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src89.csv
[Fri Oct  7 13:00:59 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src89_1.ximg exists
[Fri Oct  7 13:00:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src89.csv
[Fri Oct  7 13:00:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:01:01 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src89.ximg exists
[Fri Oct  7 13:01:01 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src89_1.ximg exists
[Fri Oct  7 13:01:01 2011] Fit fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src89 appears to have run properly
[Fri Oct  7 13:02:03 2011] Spatial fit model total counts = 555.774000, observed total counts = 545.000000
[Fri Oct  7 13:02:03 2011] Offset between fit and detection position for source 118 = 0.118543 pixels
[Fri Oct  7 13:02:03 2011] 559.998900 total counts/ 534.281000 bgd. counts: snr = 1.112630
Spatial fit parameters:
  Offset between fit and detection position for source 118 = 0.118543 pixels
  Position = (1235.9, 655.0) = 0 25 41.87 64 6 38.9
  Extent = 0.8 (0.2-1.5)", rotation angle = 0
  Source counts = 25.7 +/- 23.7
  Background counts = 534.3
  Rate = 0.0006 +/- 0.0006
  Deleting source due to low Poisson probability