[Fri Oct  7 12:51:12 2011] Detection parameters:
  Position = (1249.2, 634.6) = 0 25 40.83 64 6 29.2
  Extent = 0.5" x 0.5", rotation angle = 128 degrees
  Source counts = 13.3 +/- 8.2
  Background counts = 54.7
  Rate = 0.0003 +/- 0.0002

[Fri Oct  7 12:51:18 2011] Off-axis axis estimate = 2.96'
[Fri Oct  7 13:00:52 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:00:52 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Fri Oct  7 13:00:52 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.814
[Fri Oct  7 13:00:52 2011] Giving source the simple spatial ID 86 for pass 0, mean size = 0.57"
[Fri Oct  7 13:00:59 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src86.ximg exists
[Fri Oct  7 13:00:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src86.csv
[Fri Oct  7 13:00:59 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src86_1.ximg exists
[Fri Oct  7 13:00:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src86.csv
[Fri Oct  7 13:00:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:01:01 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src86.ximg exists
[Fri Oct  7 13:01:01 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src86_1.ximg exists
[Fri Oct  7 13:01:01 2011] Fit fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src86 appears to have run properly
[Fri Oct  7 13:02:03 2011] Spatial fit model total counts = 501.853000, observed total counts = 498.000000
[Fri Oct  7 13:02:03 2011] Offset between fit and detection position for source 114 = 0.713751 pixels
[Fri Oct  7 13:02:03 2011] 512.136000 total counts/ 498.148000 bgd. counts: snr = 0.626724
Spatial fit parameters:
  Offset between fit and detection position for source 114 = 0.713751 pixels
  Position = (1249.2, 635.4) = 0 25 40.87 64 6 29.3
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 14.0 +/- 22.6
  Background counts = 498.1
  Rate = 0.0003 +/- 0.0006
  Deleting source due to low Poisson probability