[Fri Oct  7 12:51:12 2011] Detection parameters:
  Position = (1116.3, 598.5) = 0 25 50.81 64 6 11.3
  Extent = 0.5" x 0.5", rotation angle = 43 degrees
  Source counts = 30.4 +/- 11.4
  Background counts = 100.6
  Rate = 0.0007 +/- 0.0003

[Fri Oct  7 12:51:18 2011] Off-axis axis estimate = 3.98'
[Fri Oct  7 13:00:52 2011] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:00:52 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Fri Oct  7 13:00:52 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Fri Oct  7 13:00:52 2011] Giving source the simple spatial ID 85 for pass 0, mean size = 0.82"
[Fri Oct  7 13:00:59 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src85.ximg exists
[Fri Oct  7 13:00:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src85.csv
[Fri Oct  7 13:00:59 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src85_1.ximg exists
[Fri Oct  7 13:00:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src85.csv
[Fri Oct  7 13:00:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:01:01 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src85.ximg exists
[Fri Oct  7 13:01:01 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src85_1.ximg exists
[Fri Oct  7 13:01:01 2011] Fit fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src85 appears to have run properly
[Fri Oct  7 13:02:03 2011] Spatial fit model total counts = 766.992000, observed total counts = 767.000000
[Fri Oct  7 13:02:03 2011] Offset between fit and detection position for source 112 = 0.973193 pixels
[Fri Oct  7 13:02:03 2011] 769.253060 total counts/ 759.485000 bgd. counts: snr = 0.354445
Spatial fit parameters:
  Offset between fit and detection position for source 112 = 0.973193 pixels
  Position = (1116.7, 599.4) = 0 25 50.81 64 6 11.5
  Extent = 0.2 (0.2-0.4)", rotation angle = 0
  Source counts = 9.8 +/- 27.7
  Background counts = 759.5
  Rate = 0.0002 +/- 0.0007
  Deleting source due to low Poisson probability