[Fri Oct  7 12:51:12 2011] Detection parameters:
  Position = (1143.3, 549.6) = 0 25 48.77 64 5 47.2
  Extent = 0.7" x 0.7", rotation angle = 166 degrees
  Source counts = 184.6 +/- 19.4
  Background counts = 193.4
  Rate = 0.004 +/- 0.0005

[Fri Oct  7 12:51:18 2011] Off-axis axis estimate = 4.07'
[Fri Oct  7 13:00:52 2011] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:00:52 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Fri Oct  7 13:00:52 2011] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.258
[Fri Oct  7 13:00:52 2011] Giving source the simple spatial ID 80 for pass 0, mean size = 0.85"
[Fri Oct  7 13:00:58 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src80.ximg exists
[Fri Oct  7 13:00:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src80.csv
[Fri Oct  7 13:00:58 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src80_1.ximg exists
[Fri Oct  7 13:00:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src80.csv
[Fri Oct  7 13:00:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:01:01 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src80.ximg exists
[Fri Oct  7 13:01:01 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src80_1.ximg exists
[Fri Oct  7 13:01:01 2011] Fit fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src80 appears to have run properly
[Fri Oct  7 13:02:03 2011] Spatial fit model total counts = 1011.320000, observed total counts = 1018.000000
[Fri Oct  7 13:02:03 2011] Offset between fit and detection position for source 107 = 0.972743 pixels
[Fri Oct  7 13:02:03 2011] 1009.073300 total counts/ 987.747000 bgd. counts: snr = 0.678567
Spatial fit parameters:
  Offset between fit and detection position for source 107 = 0.972743 pixels
  Position = (1143.2, 550.5) = 0 25 48.82 64 5 47.4
  Extent = 0.4 (0.2-1.1)", rotation angle = 0
  Source counts = 21.3 +/- 31.8
  Background counts = 987.7
  Rate = 0.0005 +/- 0.0008
  Deleting source due to low Poisson probability