[Fri Oct  7 12:50:59 2011] Detection parameters:
  Position = (1077.4, 841.5) = 0 25 53.76 64 8 10.8
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 1316.4 +/- 46.3
  Background counts = 822.6
  Rate = 0.03 +/- 0.001

[Fri Oct  7 12:51:18 2011] Off-axis axis estimate = 3.53'
[Fri Oct  7 13:00:52 2011] Using EEF radius (= 0.70 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:00:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 13:00:52 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Fri Oct  7 13:00:52 2011] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.607
[Fri Oct  7 13:00:52 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.70"
[Fri Oct  7 13:00:56 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 13:00:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 13:00:56 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 13:00:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 13:00:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10906_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:00:59 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 13:00:59 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 13:00:59 2011] Fit fullrun_ccd0_acisf10906_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 13:02:03 2011] Spatial fit model total counts = 2157.000000, observed total counts = 2157.000000
[Fri Oct  7 13:02:03 2011] Offset between fit and detection position for source 1 = 1.155406 pixels
[Fri Oct  7 13:02:03 2011] 2142.102000 total counts/ 1649.530000 bgd. counts: snr = 12.128012
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.155406 pixels
  Position = (1076.5, 840.9) = 0 25 53.87 64 8 10.2
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 492.6 +/- 46.3
  Background counts = 1649.5
  Rate = 0.01 +/- 0.001
[Fri Oct  7 13:02:03 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:02:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:02:03 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:02:03 2011] Source does appear to be extended
[Fri Oct  7 13:02:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:04:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 13:04:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 13:04:07 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Fri Oct  7 13:04:07 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Fri Oct  7 13:04:07 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.50"
[Fri Oct  7 13:04:09 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 13:04:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 13:04:09 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 13:04:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 13:04:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10906_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 13:04:10 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 13:04:10 2011] fullrun_ccd0_acisf10906_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 13:04:10 2011] Fit fullrun_ccd0_acisf10906_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 13:05:18 2011] Spatial fit model total counts = 4130.810000, observed total counts = 4127.000000
[Fri Oct  7 13:05:18 2011] Offset between fit and detection position for source 1 = 0.568615 pixels
[Fri Oct  7 13:05:18 2011] 4061.860000 total counts/ 2827.250000 bgd. counts: snr = 23.219223
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.568615 pixels
  Position = (1076.1, 841.3) = 0 25 53.90 64 8 10.5
  Extent = 2.4 (2.1-2.7)", rotation angle = 0
  Source counts = 1234.6 +/- 63.7
  Background counts = 2827.2
  Rate = 0.03 +/- 0.002
[Fri Oct  7 13:05:18 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:05:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:05:18 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:05:18 2011] Source does appear to be extended
[Fri Oct  7 13:05:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:05:18 2011] Source is confused with source 5
[Fri Oct  7 13:07:04 2011] Not overwriting source region fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1_src.reg
[Fri Oct  7 13:07:04 2011] Extracting stamp from image fullrun_ccd0_acisf10906_pi14-548_cl_sm2.00.img.gz, (965, 730) - (1187, 952)
[Fri Oct  7 13:07:04 2011] Writing fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1.gif
[Fri Oct  7 13:07:11 2011] ../../acisf10906/products/events/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1_src.evt and ../../acisf10906/products/events/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct  7 13:07:11 2011] Size of ../../acisf10906/products/events/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1_src.evt.gz[events] = 6678 counts
[Fri Oct  7 13:07:11 2011] Mean chipx,y = (825.55, 730.82)
[Fri Oct  7 13:07:11 2011] Mean tdetx,y = (3791.82, 4306.45)
[Fri Oct  7 13:07:11 2011] chipx,y range = (790.00-861.00, 694.00-766.00)
[Fri Oct  7 13:07:11 2011] Size of ../../acisf10906/products/events/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 21726 counts
[Fri Oct  7 13:07:11 2011] ../../acisf10906/products/images/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1_src.img and ../../acisf10906/products/images/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct  7 13:07:11 2011] ../../acisf10906/products/spectra/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1_src.pi and ../../acisf10906/products/spectra/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct  7 13:07:13 2011] ../../acisf10906/products/lightcurves/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1_src.lc and ../../acisf10906/products/lightcurves/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct  7 13:11:37 2011] Keeping rmf generated by specextract
[Fri Oct  7 13:11:39 2011] 194.166
[Fri Oct  7 13:39:45 2011] Updating aperture counts using extracted products
[Fri Oct  7 13:39:45 2011] Error reading totcts from fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct  7 13:39:47 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 13:39:47 2011] Using photon index=1.80, rate=0.03, arf fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 13:39:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 13:39:47 2011] Updating source flux to 4.3e-13
[Fri Oct  7 13:40:31 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Oct  7 13:49:41 2011] Reading fit data from acisf10906/analysis//spectral/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct  7 13:49:41 2011] Spectral fit parameter nH value = 3.96652e+21
[Fri Oct  7 13:49:41 2011] Spectral fit parameter PhoIndex value = 2.59686
[Fri Oct  7 13:49:41 2011] Failed to get F(0.3-8.0) from acisf10906/analysis//spectral/fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 13:49:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 13:49:41 2011] Using Nh = 4e+21, photon index=2.60, rate=0.03, arf fullrun_ccd0_acisf10906_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 13:49:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 13:49:41 2011] Updating source flux to 2.7e-13