[Mon Sep 26 11:46:54 2011] Detection parameters:
  Position = (597.7, 238.4) = 0 25 50.65 64 9 47.1
  Extent = 0.6" x 0.5", rotation angle = 42 degrees
  Source counts = 217.5 +/- 22.8
  Background counts = 302.5
  Rate = 0.006 +/- 0.0007

[Mon Sep 26 11:47:22 2011] Off-axis axis estimate = 3.36'
[Mon Sep 26 11:55:03 2011] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 11:55:03 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Mon Sep 26 11:55:03 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.889
[Mon Sep 26 11:55:03 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.66"
[Mon Sep 26 11:55:15 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src28.ximg exists
[Mon Sep 26 11:55:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src28.csv
[Mon Sep 26 11:55:15 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src28_1.ximg exists
[Mon Sep 26 11:55:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src28.csv
[Mon Sep 26 11:55:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 11:55:23 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Mon Sep 26 11:55:23 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Sep 26 11:55:23 2011] Fit fullrun_ccd2_acisf10904_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Mon Sep 26 11:56:55 2011] Source 31 is offset by -2.133948 and 2.199501 pixels which is larger than
2 X fitted extent = 1.159447 x 1.159447, not incorporating fit results
[Mon Sep 26 11:56:56 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 11:56:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 11:56:56 2011] Assessing source extent using major
[Mon Sep 26 11:56:56 2011] Source does appear to be extended
[Mon Sep 26 11:56:56 2011] Computing asymmetry using major and minor axis, asym = 1.14
[Mon Sep 26 11:58:53 2011] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 11:58:53 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Mon Sep 26 11:58:53 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.889
[Mon Sep 26 11:58:53 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 0.66"
[Mon Sep 26 11:58:59 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src27.ximg exists
[Mon Sep 26 11:58:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src27.csv
[Mon Sep 26 11:58:59 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src27_1.ximg exists
[Mon Sep 26 11:58:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src27.csv
[Mon Sep 26 11:58:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 11:59:04 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Mon Sep 26 11:59:04 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Mon Sep 26 11:59:04 2011] Fit fullrun_ccd2_acisf10904_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Mon Sep 26 12:00:20 2011] Source 31 is offset by -2.136896 and 2.198830 pixels which is larger than
2 X fitted extent = 1.145252 x 1.145252, not incorporating fit results
[Mon Sep 26 12:00:20 2011] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 24.114467 pixels away
[Mon Sep 26 12:00:20 2011] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 25.254198 pixels away
[Mon Sep 26 12:00:20 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 12:00:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 12:00:20 2011] Assessing source extent using major
[Mon Sep 26 12:00:20 2011] Source does appear to be extended
[Mon Sep 26 12:00:20 2011] Computing asymmetry using major and minor axis, asym = 1.14
[Mon Sep 26 12:11:08 2011] Not overwriting source region fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src31_src.reg
[Mon Sep 26 12:11:08 2011] Extracting stamp from image fullrun_ccd2_acisf10904_pi14-548_cl_sm2.00.img.gz, (572, 212) - (624, 264)
[Mon Sep 26 12:11:08 2011] Writing fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src31.gif
[Mon Sep 26 12:12:45 2011] ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src31_src.evt and ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Mon Sep 26 12:12:45 2011] Size of ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src31_src.evt.gz[events] = 293 counts
[Mon Sep 26 12:12:45 2011] Mean chipx,y = (50.57, 631.88)
[Mon Sep 26 12:12:45 2011] Mean tdetx,y = (3692.88, 4035.43)
[Mon Sep 26 12:12:45 2011] chipx,y range = (30.00-72.00, 612.00-651.00)
[Mon Sep 26 12:12:45 2011] Size of ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 2926 counts
[Mon Sep 26 12:12:45 2011] ../../acisf10904/products/images/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src31_src.img and ../../acisf10904/products/images/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Mon Sep 26 12:12:45 2011] ../../acisf10904/products/spectra/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src31_src.pi and ../../acisf10904/products/spectra/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Mon Sep 26 12:12:45 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Sep 26 12:12:48 2011] ../../acisf10904/products/lightcurves/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src31_src.lc and ../../acisf10904/products/lightcurves/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Mon Sep 26 12:17:31 2011] Keeping rmf generated by specextract
[Mon Sep 26 12:17:31 2011] 193.469
[Mon Sep 26 12:30:50 2011] Updating aperture counts using extracted products
[Mon Sep 26 12:30:50 2011] Error reading totcts from fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src31_src.pi.gz
[Mon Sep 26 12:30:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 12:30:53 2011] Using photon index=1.80, rate=0.00627, arf fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src31.arf
[Mon Sep 26 12:30:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 12:30:53 2011] Updating source flux to 8.9e-14
[Mon Sep 26 12:43:42 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting