[Mon Sep 26 11:46:54 2011] Detection parameters:
  Position = (1008.8, 520.5) = 0 25 19.71 64 12 6.1
  Extent = 0.7" x 0.7", rotation angle = 127 degrees
  Source counts = 275.2 +/- 27.3
  Background counts = 470.8
  Rate = 0.008 +/- 0.0008

[Mon Sep 26 11:47:22 2011] Off-axis axis estimate = 3.61'
[Mon Sep 26 11:55:03 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 11:55:03 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Mon Sep 26 11:55:03 2011] source mask rpix=1.5, npix_max = 15, mask sum = 12, frac = 0.779
[Mon Sep 26 11:55:03 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.72"
[Mon Sep 26 11:55:15 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src19.ximg exists
[Mon Sep 26 11:55:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src19.csv
[Mon Sep 26 11:55:15 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src19_1.ximg exists
[Mon Sep 26 11:55:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src19.csv
[Mon Sep 26 11:55:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 11:55:22 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Mon Sep 26 11:55:22 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Sep 26 11:55:22 2011] Fit fullrun_ccd2_acisf10904_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Mon Sep 26 11:56:55 2011] Spatial fit model total counts = 1259.000000, observed total counts = 1259.000000
[Mon Sep 26 11:56:55 2011] Offset between fit and detection position for source 30 = 1.586290 pixels
[Mon Sep 26 11:56:55 2011] 1266.012800 total counts/ 1176.140000 bgd. counts: snr = 2.620588
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.586290 pixels
  Position = (1010.2, 521.1) = 0 25 19.64 64 12 6.2
  Extent = 0.9 (0.3-1.5)", rotation angle = 0
  Source counts = 89.9 +/- 35.6
  Background counts = 1176.1
  Rate = 0.003 +/- 0.001
[Mon Sep 26 11:56:56 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 11:56:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 11:56:56 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 11:56:56 2011] Source does appear to be extended
[Mon Sep 26 11:56:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 11:58:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 11:58:53 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Mon Sep 26 11:58:53 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.120
[Mon Sep 26 11:58:53 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.92"
[Mon Sep 26 11:58:59 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src19.ximg exists
[Mon Sep 26 11:58:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src19.csv
[Mon Sep 26 11:58:59 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src19_1.ximg exists
[Mon Sep 26 11:58:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src19.csv
[Mon Sep 26 11:58:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 11:59:04 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Mon Sep 26 11:59:04 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Sep 26 11:59:04 2011] Fit fullrun_ccd2_acisf10904_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Mon Sep 26 12:00:20 2011] Spatial fit model total counts = 1282.190000, observed total counts = 1284.000000
[Mon Sep 26 12:00:20 2011] Offset between fit and detection position for source 30 = 0.186578 pixels
[Mon Sep 26 12:00:20 2011] 1282.621400 total counts/ 1202.180000 bgd. counts: snr = 2.320037
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.186578 pixels
  Position = (1010.4, 521.1) = 0 25 19.62 64 12 6.1
  Extent = 0.8 (0.3-1.8)", rotation angle = 0
  Source counts = 80.4 +/- 35.8
  Background counts = 1202.2
  Rate = 0.002 +/- 0.001
[Mon Sep 26 12:00:20 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 12:00:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 12:00:20 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 12:00:20 2011] Source does appear to be extended
[Mon Sep 26 12:00:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 12:11:08 2011] Not overwriting source region fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src30_src.reg
[Mon Sep 26 12:11:08 2011] Extracting stamp from image fullrun_ccd2_acisf10904_pi14-548_cl_sm2.00.img.gz, (972, 483) - (1049, 560)
[Mon Sep 26 12:11:08 2011] Writing fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src30.gif
[Mon Sep 26 12:12:19 2011] ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src30_src.evt and ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Mon Sep 26 12:12:19 2011] Size of ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src30_src.evt.gz[events] = 799 counts
[Mon Sep 26 12:12:19 2011] Mean chipx,y = (487.43, 876.36)
[Mon Sep 26 12:12:19 2011] Mean tdetx,y = (3937.36, 3598.57)
[Mon Sep 26 12:12:19 2011] chipx,y range = (465.00-511.00, 853.00-901.00)
[Mon Sep 26 12:12:19 2011] Size of ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 2437 counts
[Mon Sep 26 12:12:19 2011] ../../acisf10904/products/images/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src30_src.img and ../../acisf10904/products/images/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Mon Sep 26 12:12:19 2011] ../../acisf10904/products/spectra/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src30_src.pi and ../../acisf10904/products/spectra/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Mon Sep 26 12:12:19 2011] Not generating rmf since there are only 80 counts
[Mon Sep 26 12:12:22 2011] ../../acisf10904/products/lightcurves/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src30_src.lc and ../../acisf10904/products/lightcurves/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Mon Sep 26 12:17:30 2011] 185.101
[Mon Sep 26 12:30:49 2011] Updating aperture counts using extracted products
[Mon Sep 26 12:30:49 2011] Error reading totcts from fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src30_src.pi.gz
[Mon Sep 26 12:30:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 12:30:52 2011] Using photon index=1.80, rate=0.00232, arf fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src30.arf
[Mon Sep 26 12:30:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 12:30:52 2011] Updating source flux to 3.4e-14
[Mon Sep 26 12:43:42 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting