[Mon Sep 26 11:47:17 2011] Detection parameters:
  Position = (973.5, 223.3) = 0 25 22.37 64 9 39.9
  Extent = 0.5" x 0.5", rotation angle = 138 degrees
  Source counts = 137.2 +/- 18.0
  Background counts = 186.8
  Rate = 0.004 +/- 0.0005

[Mon Sep 26 11:47:22 2011] Off-axis axis estimate = 1.16'
[Mon Sep 26 11:55:03 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 11:55:03 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Sep 26 11:55:03 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.384
[Mon Sep 26 11:55:03 2011] Giving source the simple spatial ID 53 for pass 0, mean size = 0.38"
[Mon Sep 26 11:55:16 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src53.ximg exists
[Mon Sep 26 11:55:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src53.csv
[Mon Sep 26 11:55:16 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src53_1.ximg exists
[Mon Sep 26 11:55:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src53.csv
[Mon Sep 26 11:55:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 11:55:25 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_tfrozen_src53.ximg exists
[Mon Sep 26 11:55:25 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_tfrozen_src53_1.ximg exists
[Mon Sep 26 11:55:25 2011] Fit fullrun_ccd2_acisf10904_pi14-548_cl_pass0_tfrozen_src53 appears to have run properly
[Mon Sep 26 11:56:56 2011] Spatial fit model total counts = 990.593000, observed total counts = 990.000000
[Mon Sep 26 11:56:56 2011] Offset between fit and detection position for source 229 = 2.660436 pixels
[Mon Sep 26 11:56:56 2011] 985.080000 total counts/ 880.058000 bgd. counts: snr = 3.540174
Spatial fit parameters:
  Offset between fit and detection position for source 229 = 2.660436 pixels
  Position = (976.1, 222.9) = 0 25 22.21 64 9 39.4
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 105.0 +/- 31.4
  Background counts = 880.1
  Rate = 0.003 +/- 0.0009
[Mon Sep 26 11:56:56 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 11:56:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 11:56:56 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 11:56:56 2011] Source does appear to be extended
[Mon Sep 26 11:56:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 11:58:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 11:58:53 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Mon Sep 26 11:58:53 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Mon Sep 26 11:58:53 2011] Giving source the simple spatial ID 51 for pass 1, mean size = 1.50"
[Mon Sep 26 11:59:00 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src51.ximg exists
[Mon Sep 26 11:59:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src51.csv
[Mon Sep 26 11:59:00 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src51_1.ximg exists
[Mon Sep 26 11:59:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src51.csv
[Mon Sep 26 11:59:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 11:59:05 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_tfrozen_src51.ximg exists
[Mon Sep 26 11:59:05 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_tfrozen_src51_1.ximg exists
[Mon Sep 26 11:59:05 2011] Fit fullrun_ccd2_acisf10904_pi14-548_cl_pass1_tfrozen_src51 appears to have run properly
[Mon Sep 26 12:00:20 2011] Spatial fit model total counts = 1284.100000, observed total counts = 1283.000000
[Mon Sep 26 12:00:20 2011] Offset between fit and detection position for source 229 = 5.595223 pixels
[Mon Sep 26 12:00:20 2011] 1259.672000 total counts/ 841.707000 bgd. counts: snr = 14.406532
Spatial fit parameters:
  Offset between fit and detection position for source 229 = 5.595223 pixels
  Position = (981.4, 221.0) = 0 25 21.81 64 9 38.5
  Extent = 3.0 (3.0-6.0)", rotation angle = 0
  Source counts = 418.0 +/- 35.5
  Background counts = 841.7
  Rate = 0.01 +/- 0.001
[Mon Sep 26 12:00:20 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 12:00:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 12:00:20 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 12:00:20 2011] Source does appear to be extended
[Mon Sep 26 12:00:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 12:11:09 2011] Not overwriting source region fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src229_src.reg
[Mon Sep 26 12:11:09 2011] Extracting stamp from image fullrun_ccd2_acisf10904_pi14-548_cl_sm2.00.img.gz, (844, 84) - (1119, 358)
[Mon Sep 26 12:11:09 2011] Writing fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src229.gif
[Mon Sep 26 12:14:20 2011] ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src229_src.evt and ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src229_bgd.evt exist, delete to re-create
[Mon Sep 26 12:14:20 2011] Size of ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src229_src.evt.gz[events] = 5005 counts
[Mon Sep 26 12:14:20 2011] Mean chipx,y = (203.90, 981.42)
[Mon Sep 26 12:14:20 2011] Mean tdetx,y = (4042.42, 3882.10)
[Mon Sep 26 12:14:20 2011] chipx,y range = (164.00-246.00, 944.00-1023.00)
[Mon Sep 26 12:14:20 2011] Size of ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src229_bgd.evt.gz[events] = 24790 counts
[Mon Sep 26 12:14:20 2011] ../../acisf10904/products/images/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src229_src.img and ../../acisf10904/products/images/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src229_bgd.img exist, delete to re-create
[Mon Sep 26 12:14:20 2011] ../../acisf10904/products/spectra/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src229_src.pi and ../../acisf10904/products/spectra/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src229_bgd.pi exist, delete to re-create
[Mon Sep 26 12:14:24 2011] ../../acisf10904/products/lightcurves/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src229_src.lc and ../../acisf10904/products/lightcurves/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src229_bgd.lc exist, delete to re-create
[Mon Sep 26 12:17:33 2011] Keeping rmf generated by specextract
[Mon Sep 26 12:17:33 2011] 186.975
[Mon Sep 26 12:30:50 2011] Updating aperture counts using extracted products
[Mon Sep 26 12:30:50 2011] Error reading totcts from fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src229_src.pi.gz
[Mon Sep 26 12:30:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 12:30:53 2011] Using photon index=1.80, rate=0.012, arf fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src229.arf
[Mon Sep 26 12:30:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 12:30:53 2011] Updating source flux to 1.8e-13