[Mon Sep 26 11:47:09 2011] Detection parameters:
  Position = (988.7, 509.5) = 0 25 21.22 64 12 0.7
  Extent = 0.6" x 0.5", rotation angle = 54 degrees
  Source counts = 141.7 +/- 20.2
  Background counts = 266.3
  Rate = 0.004 +/- 0.0006

[Mon Sep 26 11:47:22 2011] Off-axis axis estimate = 3.51'
[Mon Sep 26 11:55:03 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 11:55:03 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Mon Sep 26 11:55:03 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.821
[Mon Sep 26 11:55:03 2011] Giving source the simple spatial ID 51 for pass 0, mean size = 0.69"
[Mon Sep 26 11:55:16 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src51.ximg exists
[Mon Sep 26 11:55:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src51.csv
[Mon Sep 26 11:55:16 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src51_1.ximg exists
[Mon Sep 26 11:55:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src51.csv
[Mon Sep 26 11:55:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10904_pi14-548_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 11:55:24 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_tfrozen_src51.ximg exists
[Mon Sep 26 11:55:24 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass0_tfrozen_src51_1.ximg exists
[Mon Sep 26 11:55:24 2011] Fit fullrun_ccd2_acisf10904_pi14-548_cl_pass0_tfrozen_src51 appears to have run properly
[Mon Sep 26 11:56:56 2011] Source 170 is offset by 3.052953 and 5.123557 pixels which is larger than
2 X fitted extent = 0.707003 x 0.707003, not incorporating fit results
[Mon Sep 26 11:56:56 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 11:56:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 11:56:56 2011] Assessing source extent using major
[Mon Sep 26 11:56:56 2011] Source does appear to be extended
[Mon Sep 26 11:56:56 2011] Computing asymmetry using major and minor axis, asym = 1.16
[Mon Sep 26 11:58:53 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 11:58:53 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Mon Sep 26 11:58:53 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.821
[Mon Sep 26 11:58:53 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 0.69"
[Mon Sep 26 11:59:00 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src49.ximg exists
[Mon Sep 26 11:59:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src49.csv
[Mon Sep 26 11:59:00 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src49_1.ximg exists
[Mon Sep 26 11:59:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src49.csv
[Mon Sep 26 11:59:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10904_pi14-548_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 11:59:05 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_tfrozen_src49.ximg exists
[Mon Sep 26 11:59:05 2011] fullrun_ccd2_acisf10904_pi14-548_cl_pass1_tfrozen_src49_1.ximg exists
[Mon Sep 26 11:59:05 2011] Fit fullrun_ccd2_acisf10904_pi14-548_cl_pass1_tfrozen_src49 appears to have run properly
[Mon Sep 26 12:00:20 2011] Spatial fit model total counts = 1184.930000, observed total counts = 1187.000000
[Mon Sep 26 12:00:20 2011] Offset between fit and detection position for source 170 = 1.814005 pixels
[Mon Sep 26 12:00:20 2011] 1187.383000 total counts/ 1048.260000 bgd. counts: snr = 4.296991
Spatial fit parameters:
  Offset between fit and detection position for source 170 = 1.814005 pixels
  Position = (990.0, 510.7) = 0 25 21.16 64 12 1.0
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 139.1 +/- 34.5
  Background counts = 1048.3
  Rate = 0.004 +/- 0.001
[Mon Sep 26 12:00:20 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 12:00:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 12:00:20 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 12:00:20 2011] Source does appear to be extended
[Mon Sep 26 12:00:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 12:11:09 2011] Not overwriting source region fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src170_src.reg
[Mon Sep 26 12:11:09 2011] Extracting stamp from image fullrun_ccd2_acisf10904_pi14-548_cl_sm2.00.img.gz, (921, 442) - (1059, 579)
[Mon Sep 26 12:11:09 2011] Writing fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src170.gif
[Mon Sep 26 12:14:12 2011] ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src170_src.evt and ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src170_bgd.evt exist, delete to re-create
[Mon Sep 26 12:14:12 2011] Size of ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src170_src.evt.gz[events] = 2060 counts
[Mon Sep 26 12:14:12 2011] Mean chipx,y = (469.26, 863.61)
[Mon Sep 26 12:14:12 2011] Mean tdetx,y = (3924.61, 3616.74)
[Mon Sep 26 12:14:12 2011] chipx,y range = (441.00-498.00, 835.00-892.00)
[Mon Sep 26 12:14:12 2011] Size of ../../acisf10904/products/events/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src170_bgd.evt.gz[events] = 12374 counts
[Mon Sep 26 12:14:12 2011] ../../acisf10904/products/images/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src170_src.img and ../../acisf10904/products/images/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src170_bgd.img exist, delete to re-create
[Mon Sep 26 12:14:12 2011] ../../acisf10904/products/spectra/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src170_src.pi and ../../acisf10904/products/spectra/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src170_bgd.pi exist, delete to re-create
[Mon Sep 26 12:14:16 2011] ../../acisf10904/products/lightcurves/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src170_src.lc and ../../acisf10904/products/lightcurves/fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src170_bgd.lc exist, delete to re-create
[Mon Sep 26 12:17:32 2011] Keeping rmf generated by specextract
[Mon Sep 26 12:17:33 2011] 186.506
[Mon Sep 26 12:30:50 2011] Updating aperture counts using extracted products
[Mon Sep 26 12:30:50 2011] Error reading totcts from fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src170_src.pi.gz
[Mon Sep 26 12:30:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 12:30:53 2011] Using photon index=1.80, rate=0.00401, arf fullrun_ccd2_acisf10904_pi14-548_pass1_cl_src170.arf
[Mon Sep 26 12:30:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 12:30:53 2011] Updating source flux to 5.9e-14
[Mon Sep 26 12:43:42 2011] Flag b found in src. 170 procflags, skipping spectral fitting