[Tue Sep 27 22:32:54 2011] Detection parameters:
  Position = (284.5, 424.5) = 0 25 4.32 64 7 18.7
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 110.3 +/- 14.5
  Background counts = 99.7
  Rate = 0.005 +/- 0.0006

[Tue Sep 27 22:33:15 2011] Off-axis axis estimate = 2.28'
[Tue Sep 27 22:37:58 2011] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 22:37:58 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Tue Sep 27 22:37:58 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.087
[Tue Sep 27 22:37:58 2011] Giving source the simple spatial ID 87 for pass 0, mean size = 0.46"
[Tue Sep 27 22:38:02 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass0_src87.ximg exists
[Tue Sep 27 22:38:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10903_pi14-548_cl_pass0_src87.csv
[Tue Sep 27 22:38:02 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass0_src87_1.ximg exists
[Tue Sep 27 22:38:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10903_pi14-548_cl_pass0_src87.csv
[Tue Sep 27 22:38:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10903_pi14-548_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10903_pi14-548_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 22:38:08 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass0_tfrozen_src87.ximg exists
[Tue Sep 27 22:38:08 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass0_tfrozen_src87_1.ximg exists
[Tue Sep 27 22:38:08 2011] Fit fullrun_ccd3_acisf10903_pi14-548_cl_pass0_tfrozen_src87 appears to have run properly
[Tue Sep 27 22:39:30 2011] Spatial fit model total counts = 1209.350000, observed total counts = 1212.000000
[Tue Sep 27 22:39:30 2011] Offset between fit and detection position for source 70 = 2.764503 pixels
[Tue Sep 27 22:39:30 2011] 1195.575000 total counts/ 1014.360000 bgd. counts: snr = 5.689814
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 2.764503 pixels
  Position = (286.9, 425.8) = 0 25 4.17 64 7 19.1
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 181.2 +/- 34.6
  Background counts = 1014.4
  Rate = 0.008 +/- 0.001
[Tue Sep 27 22:39:30 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 22:39:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 22:39:30 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 22:39:30 2011] Source does appear to be extended
[Tue Sep 27 22:39:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 22:40:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 22:40:45 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Tue Sep 27 22:40:45 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Tue Sep 27 22:40:45 2011] Giving source the simple spatial ID 82 for pass 1, mean size = 1.50"
[Tue Sep 27 22:40:50 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass1_src82.ximg exists
[Tue Sep 27 22:40:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10903_pi14-548_cl_pass1_src82.csv
[Tue Sep 27 22:40:50 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass1_src82_1.ximg exists
[Tue Sep 27 22:40:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10903_pi14-548_cl_pass1_src82.csv
[Tue Sep 27 22:40:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10903_pi14-548_cl_pass1_src82_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10903_pi14-548_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 22:40:53 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass1_tfrozen_src82.ximg exists
[Tue Sep 27 22:40:53 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass1_tfrozen_src82_1.ximg exists
[Tue Sep 27 22:40:53 2011] Fit fullrun_ccd3_acisf10903_pi14-548_cl_pass1_tfrozen_src82 appears to have run properly
[Tue Sep 27 22:41:51 2011] Spatial fit model total counts = 1588.210000, observed total counts = 1582.000000
[Tue Sep 27 22:41:51 2011] Offset between fit and detection position for source 70 = 2.461552 pixels
[Tue Sep 27 22:41:51 2011] 1559.608000 total counts/ 1311.490000 bgd. counts: snr = 6.851344
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 2.461552 pixels
  Position = (289.4, 425.4) = 0 25 3.99 64 7 18.9
  Extent = 1.8 (1.2-2.8)", rotation angle = 0
  Source counts = 248.1 +/- 39.5
  Background counts = 1311.5
  Rate = 0.01 +/- 0.002
[Tue Sep 27 22:41:51 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 22:41:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 22:41:51 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 22:41:51 2011] Source does appear to be extended
[Tue Sep 27 22:41:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 22:56:23 2011] Not overwriting source region fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src70_src.reg
[Tue Sep 27 22:56:23 2011] Extracting stamp from image fullrun_ccd3_acisf10903_pi14-548_cl_sm2.00.img.gz, (207, 343) - (372, 508)
[Tue Sep 27 22:56:23 2011] Writing fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src70.gif
[Tue Sep 27 23:01:10 2011] ../../acisf10903/products/events/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src70_src.evt and ../../acisf10903/products/events/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src70_bgd.evt exist, delete to re-create
[Tue Sep 27 23:01:10 2011] Size of ../../acisf10903/products/events/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src70_src.evt.gz[events] = 2614 counts
[Tue Sep 27 23:01:10 2011] Mean chipx,y = (960.18, 746.69)
[Tue Sep 27 23:01:10 2011] Mean tdetx,y = (4385.31, 4021.18)
[Tue Sep 27 23:01:10 2011] chipx,y range = (929.00-990.00, 715.00-776.00)
[Tue Sep 27 23:01:10 2011] Size of ../../acisf10903/products/events/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src70_bgd.evt.gz[events] = 12268 counts
[Tue Sep 27 23:01:10 2011] ../../acisf10903/products/images/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src70_src.img and ../../acisf10903/products/images/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src70_bgd.img exist, delete to re-create
[Tue Sep 27 23:01:10 2011] ../../acisf10903/products/spectra/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src70_src.pi and ../../acisf10903/products/spectra/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src70_bgd.pi exist, delete to re-create
[Tue Sep 27 23:01:14 2011] ../../acisf10903/products/lightcurves/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src70_src.lc and ../../acisf10903/products/lightcurves/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src70_bgd.lc exist, delete to re-create
[Tue Sep 27 23:05:14 2011] Keeping rmf generated by specextract
[Tue Sep 27 23:05:14 2011] 201.848
[Tue Sep 27 23:05:40 2011] Updating aperture counts using extracted products
[Tue Sep 27 23:05:40 2011] Error reading totcts from fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src70_src.pi.gz
[Tue Sep 27 23:05:43 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 23:05:43 2011] Using photon index=1.80, rate=0.0104, arf fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src70.arf
[Tue Sep 27 23:05:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 23:05:43 2011] Updating source flux to 1.4e-13