[Tue Sep 27 22:32:58 2011] Detection parameters:
  Position = (561.4, 693.7) = 0 24 43.46 64 9 30.9
  Extent = 0.5" x 0.5", rotation angle = 126 degrees
  Source counts = 213.8 +/- 18.0
  Background counts = 110.2
  Rate = 0.009 +/- 0.0008

[Tue Sep 27 22:33:15 2011] Off-axis axis estimate = 4.32'
[Tue Sep 27 22:37:58 2011] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 22:37:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 22:37:58 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Tue Sep 27 22:37:58 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.093
[Tue Sep 27 22:37:58 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.93"
[Tue Sep 27 22:38:00 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass0_src28.ximg exists
[Tue Sep 27 22:38:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10903_pi14-548_cl_pass0_src28.csv
[Tue Sep 27 22:38:01 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass0_src28_1.ximg exists
[Tue Sep 27 22:38:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10903_pi14-548_cl_pass0_src28.csv
[Tue Sep 27 22:38:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10903_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10903_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 22:38:03 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Tue Sep 27 22:38:03 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Sep 27 22:38:03 2011] Fit fullrun_ccd3_acisf10903_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Tue Sep 27 22:39:30 2011] Spatial fit model total counts = 1007.000000, observed total counts = 1007.000000
[Tue Sep 27 22:39:30 2011] Offset between fit and detection position for source 123 = 0.937173 pixels
[Tue Sep 27 22:39:30 2011] 1009.864000 total counts/ 872.934000 bgd. counts: snr = 4.634554
Spatial fit parameters:
  Offset between fit and detection position for source 123 = 0.937173 pixels
  Position = (561.9, 692.9) = 0 24 43.46 64 9 30.2
  Extent = 1.5 (1.0-1.9)", rotation angle = 0
  Source counts = 136.9 +/- 31.8
  Background counts = 872.9
  Rate = 0.006 +/- 0.001
[Tue Sep 27 22:39:30 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 22:39:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 22:39:30 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 22:39:30 2011] Source does appear to be extended
[Tue Sep 27 22:39:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 22:40:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 22:40:45 2011] Initial guess for spatial extent in simple fitting = 1.47"
[Tue Sep 27 22:40:45 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.009
[Tue Sep 27 22:40:45 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 1.47"
[Tue Sep 27 22:40:48 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass1_src26.ximg exists
[Tue Sep 27 22:40:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10903_pi14-548_cl_pass1_src26.csv
[Tue Sep 27 22:40:48 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass1_src26_1.ximg exists
[Tue Sep 27 22:40:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10903_pi14-548_cl_pass1_src26.csv
[Tue Sep 27 22:40:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10903_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10903_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 22:40:52 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Tue Sep 27 22:40:52 2011] fullrun_ccd3_acisf10903_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Sep 27 22:40:52 2011] Fit fullrun_ccd3_acisf10903_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Tue Sep 27 22:41:51 2011] Warning, spatial fit 26 centroid is now closest to src. 124
[Tue Sep 27 22:41:51 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 22:41:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 22:41:51 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 22:41:51 2011] Source does appear to be extended
[Tue Sep 27 22:41:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 22:41:51 2011] Source is confused with source 124
[Tue Sep 27 22:56:21 2011] Not overwriting source region fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src123_src.reg
[Tue Sep 27 22:56:21 2011] Extracting stamp from image fullrun_ccd3_acisf10903_pi14-548_cl_sm2.00.img.gz, (495, 626) - (629, 760)
[Tue Sep 27 22:56:21 2011] Writing fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src123.gif
[Tue Sep 27 22:57:56 2011] ../../acisf10903/products/events/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src123_src.evt and ../../acisf10903/products/events/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src123_bgd.evt exist, delete to re-create
[Tue Sep 27 22:57:56 2011] Size of ../../acisf10903/products/events/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src123_src.evt.gz[events] = 1565 counts
[Tue Sep 27 22:57:56 2011] Mean chipx,y = (591.74, 638.67)
[Tue Sep 27 22:57:56 2011] Mean tdetx,y = (4493.33, 3652.74)
[Tue Sep 27 22:57:56 2011] chipx,y range = (565.00-620.00, 610.00-664.00)
[Tue Sep 27 22:57:56 2011] Size of ../../acisf10903/products/events/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src123_bgd.evt.gz[events] = 3029 counts
[Tue Sep 27 22:57:56 2011] ../../acisf10903/products/images/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src123_src.img and ../../acisf10903/products/images/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src123_bgd.img exist, delete to re-create
[Tue Sep 27 22:57:56 2011] ../../acisf10903/products/spectra/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src123_src.pi and ../../acisf10903/products/spectra/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src123_bgd.pi exist, delete to re-create
[Tue Sep 27 22:57:59 2011] ../../acisf10903/products/lightcurves/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src123_src.lc and ../../acisf10903/products/lightcurves/fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src123_bgd.lc exist, delete to re-create
[Tue Sep 27 23:05:11 2011] Keeping rmf generated by specextract
[Tue Sep 27 23:05:11 2011] 188.297
[Tue Sep 27 23:05:39 2011] Updating aperture counts using extracted products
[Tue Sep 27 23:05:39 2011] Error reading totcts from fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src123_src.pi.gz
[Tue Sep 27 23:05:42 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 23:05:42 2011] Using photon index=1.80, rate=0.00572, arf fullrun_ccd3_acisf10903_pi14-548_pass1_cl_src123.arf
[Tue Sep 27 23:05:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 23:05:42 2011] Updating source flux to 8.4e-14
[Tue Sep 27 23:19:20 2011] Flag c found in src. 123 procflags, skipping spectral fitting