[Tue Sep 27 22:32:25 2011] Detection parameters: Position = (816.5, 444.6) = 0 25 32.14 64 11 32.1 Extent = 0.5" x 0.5", rotation angle = 143 degrees Source counts = 420.6 +/- 29.9 Background counts = 471.4 Rate = 0.02 +/- 0.001 [Tue Sep 27 22:32:46 2011] Off-axis axis estimate = 3.21' [Tue Sep 27 22:37:48 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting [Tue Sep 27 22:37:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Sep 27 22:37:48 2011] Initial guess for spatial extent in simple fitting = 0.62" [Tue Sep 27 22:37:48 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.719 [Tue Sep 27 22:37:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.62" [Tue Sep 27 22:37:50 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass0_src1.ximg exists [Tue Sep 27 22:37:50 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass0_src1_1.ximg exists [Tue Sep 27 22:37:50 2011] Fit fullrun_ccd2_acisf10903_pi14-548_cl_pass0_src1 appears to have run properly [Tue Sep 27 22:37:52 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Tue Sep 27 22:37:52 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Tue Sep 27 22:37:52 2011] Fit fullrun_ccd2_acisf10903_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Tue Sep 27 22:39:11 2011] Spatial fit model total counts = 1896.000000, observed total counts = 1896.000000 [Tue Sep 27 22:39:11 2011] Offset between fit and detection position for source 2 = 3.255927 pixels [Tue Sep 27 22:39:11 2011] 1871.377000 total counts/ 1666.130000 bgd. counts: snr = 5.028314 Spatial fit parameters: Offset between fit and detection position for source 2 = 3.255927 pixels Position = (817.6, 447.7) = 0 25 32.11 64 11 33.4 Extent = 1.5 (1.5-1.5)", rotation angle = 0 Source counts = 205.2 +/- 43.3 Background counts = 1666.1 Rate = 0.009 +/- 0.002 [Tue Sep 27 22:39:11 2011] Vigneting correction estimate = 1.000000 [Tue Sep 27 22:39:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 27 22:39:11 2011] Assessing source extent using major axis lower bound [Tue Sep 27 22:39:11 2011] Source does appear to be extended [Tue Sep 27 22:39:11 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 27 22:40:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Sep 27 22:40:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Sep 27 22:40:33 2011] Initial guess for spatial extent in simple fitting = 1.50" [Tue Sep 27 22:40:33 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973 [Tue Sep 27 22:40:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.50" [Tue Sep 27 22:40:34 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass1_src1.ximg exists [Tue Sep 27 22:40:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10903_pi14-548_cl_pass1_src1.csv [Tue Sep 27 22:40:34 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass1_src1_1.ximg exists [Tue Sep 27 22:40:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10903_pi14-548_cl_pass1_src1.csv [Tue Sep 27 22:40:34 2011] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf10903_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf10903_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Sep 27 22:40:36 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Tue Sep 27 22:40:36 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Tue Sep 27 22:40:36 2011] Fit fullrun_ccd2_acisf10903_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Tue Sep 27 22:41:37 2011] Spatial fit model total counts = 3404.440000, observed total counts = 3404.000000 [Tue Sep 27 22:41:37 2011] Offset between fit and detection position for source 2 = 0.323378 pixels [Tue Sep 27 22:41:37 2011] 3335.535000 total counts/ 2839.040000 bgd. counts: snr = 9.318138 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.323378 pixels Position = (817.5, 447.4) = 0 25 32.11 64 11 33.3 Extent = 2.1 (1.7-2.8)", rotation angle = 0 Source counts = 496.5 +/- 57.8 Background counts = 2839.0 Rate = 0.02 +/- 0.002 [Tue Sep 27 22:41:37 2011] Vigneting correction estimate = 1.000000 [Tue Sep 27 22:41:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 27 22:41:37 2011] Assessing source extent using major axis lower bound [Tue Sep 27 22:41:37 2011] Source does appear to be extended [Tue Sep 27 22:41:37 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 27 22:51:22 2011] Not overwriting source region fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2_src.reg [Tue Sep 27 22:51:22 2011] Extracting stamp from image fullrun_ccd2_acisf10903_pi14-548_cl_sm2.00.img.gz, (720, 350) - (915, 545) [Tue Sep 27 22:51:22 2011] Writing fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2.gif [Tue Sep 27 22:51:33 2011] ../../acisf10903/products/events/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2_src.evt and ../../acisf10903/products/events/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create [Tue Sep 27 22:51:33 2011] Size of ../../acisf10903/products/events/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2_src.evt.gz[events] = 5169 counts [Tue Sep 27 22:51:33 2011] Mean chipx,y = (333.16, 746.87) [Tue Sep 27 22:51:33 2011] Mean tdetx,y = (3807.87, 3752.84) [Tue Sep 27 22:51:33 2011] chipx,y range = (302.00-369.00, 713.00-779.00) [Tue Sep 27 22:51:33 2011] Size of ../../acisf10903/products/events/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 16320 counts [Tue Sep 27 22:51:33 2011] ../../acisf10903/products/images/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2_src.img and ../../acisf10903/products/images/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create [Tue Sep 27 22:51:33 2011] ../../acisf10903/products/spectra/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2_src.pi and ../../acisf10903/products/spectra/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create [Tue Sep 27 22:51:36 2011] ../../acisf10903/products/lightcurves/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2_src.lc and ../../acisf10903/products/lightcurves/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create [Tue Sep 27 22:56:13 2011] Keeping rmf generated by specextract [Tue Sep 27 22:56:13 2011] 191.081 [Tue Sep 27 23:05:34 2011] Updating aperture counts using extracted products [Tue Sep 27 23:05:34 2011] Error reading totcts from fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2_src.pi.gz [Tue Sep 27 23:05:36 2011] Calculating source flux in energy range 0.30-8.00 [Tue Sep 27 23:05:36 2011] Using photon index=1.80, rate=0.0208, arf fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2.arf [Tue Sep 27 23:05:36 2011] Assuming count rate is from the 0.20-8.00 bandpass [Tue Sep 27 23:05:36 2011] Updating source flux to 3e-13 [Tue Sep 27 23:19:20 2011] Reading fit data from acisf10903/analysis//spectral/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2_pl.csv [Tue Sep 27 23:19:20 2011] Spectral fit parameter nH value = 4.14749e+21 [Tue Sep 27 23:19:20 2011] Spectral fit parameter PhoIndex value = 3.49928 [Tue Sep 27 23:19:20 2011] Failed to get F(0.3-8.0) from acisf10903/analysis//spectral/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected [Tue Sep 27 23:19:20 2011] Calculating source flux in energy range 0.30-8.00 [Tue Sep 27 23:19:20 2011] Using Nh = 4.1e+21, photon index=3.50, rate=0.0208, arf fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src2.arf [Tue Sep 27 23:19:20 2011] Assuming count rate is from the 0.20-8.00 bandpass [Tue Sep 27 23:19:20 2011] Updating source flux to 1.6e-13