[Tue Sep 27 22:32:39 2011] Detection parameters:
  Position = (903.0, 560.2) = 0 25 25.63 64 12 29.1
  Extent = 0.7" x 0.6", rotation angle = 148 degrees
  Source counts = 63.3 +/- 11.2
  Background counts = 61.7
  Rate = 0.003 +/- 0.0005

[Tue Sep 27 22:32:46 2011] Off-axis axis estimate = 3.98'
[Tue Sep 27 22:37:48 2011] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 22:37:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 22:37:48 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Tue Sep 27 22:37:48 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Tue Sep 27 22:37:48 2011] Giving source the simple spatial ID 65 for pass 0, mean size = 0.82"
[Tue Sep 27 22:37:52 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass0_src65.ximg exists
[Tue Sep 27 22:37:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10903_pi14-548_cl_pass0_src65.csv
[Tue Sep 27 22:37:52 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass0_src65_1.ximg exists
[Tue Sep 27 22:37:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10903_pi14-548_cl_pass0_src65.csv
[Tue Sep 27 22:37:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10903_pi14-548_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10903_pi14-548_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 22:37:54 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass0_tfrozen_src65.ximg exists
[Tue Sep 27 22:37:54 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass0_tfrozen_src65_1.ximg exists
[Tue Sep 27 22:37:54 2011] Fit fullrun_ccd2_acisf10903_pi14-548_cl_pass0_tfrozen_src65 appears to have run properly
[Tue Sep 27 22:39:11 2011] Spatial fit model total counts = 160.999000, observed total counts = 161.000000
[Tue Sep 27 22:39:11 2011] Offset between fit and detection position for source 112 = 0.949065 pixels
[Tue Sep 27 22:39:11 2011] 160.281900 total counts/ 106.867000 bgd. counts: snr = 5.167026
Spatial fit parameters:
  Offset between fit and detection position for source 112 = 0.949065 pixels
  Position = (902.1, 560.4) = 0 25 25.74 64 12 28.9
  Extent = 1.2 (0.8-1.6)", rotation angle = 0
  Source counts = 53.4 +/- 12.7
  Background counts = 106.9
  Rate = 0.002 +/- 0.0005
[Tue Sep 27 22:39:11 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 22:39:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 22:39:11 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 22:39:11 2011] Source does appear to be extended
[Tue Sep 27 22:39:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 22:40:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 22:40:33 2011] Initial guess for spatial extent in simple fitting = 1.16"
[Tue Sep 27 22:40:33 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.106
[Tue Sep 27 22:40:33 2011] Giving source the simple spatial ID 61 for pass 1, mean size = 1.16"
[Tue Sep 27 22:40:36 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass1_src61.ximg exists
[Tue Sep 27 22:40:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10903_pi14-548_cl_pass1_src61.csv
[Tue Sep 27 22:40:36 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass1_src61_1.ximg exists
[Tue Sep 27 22:40:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10903_pi14-548_cl_pass1_src61.csv
[Tue Sep 27 22:40:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10903_pi14-548_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10903_pi14-548_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 22:40:42 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass1_tfrozen_src61.ximg exists
[Tue Sep 27 22:40:43 2011] fullrun_ccd2_acisf10903_pi14-548_cl_pass1_tfrozen_src61_1.ximg exists
[Tue Sep 27 22:40:43 2011] Fit fullrun_ccd2_acisf10903_pi14-548_cl_pass1_tfrozen_src61 appears to have run properly
[Tue Sep 27 22:41:37 2011] Spatial fit model total counts = 158.999000, observed total counts = 159.000000
[Tue Sep 27 22:41:37 2011] Offset between fit and detection position for source 112 = 0.522843 pixels
[Tue Sep 27 22:41:37 2011] 155.558300 total counts/ 103.043000 bgd. counts: snr = 5.173406
Spatial fit parameters:
  Offset between fit and detection position for source 112 = 0.522843 pixels
  Position = (902.6, 560.5) = 0 25 25.70 64 12 28.9
  Extent = 1.1 (0.8-1.6)", rotation angle = 0
  Source counts = 52.5 +/- 12.5
  Background counts = 103.0
  Rate = 0.002 +/- 0.0005
[Tue Sep 27 22:41:37 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 22:41:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 22:41:37 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 22:41:37 2011] Source does appear to be extended
[Tue Sep 27 22:41:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 22:51:25 2011] Not overwriting source region fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src112_src.reg
[Tue Sep 27 22:51:25 2011] Extracting stamp from image fullrun_ccd2_acisf10903_pi14-548_cl_sm2.00.img.gz, (851, 509) - (954, 612)
[Tue Sep 27 22:51:25 2011] Writing fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src112.gif
[Tue Sep 27 22:54:54 2011] ../../acisf10903/products/events/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src112_src.evt and ../../acisf10903/products/events/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src112_bgd.evt exist, delete to re-create
[Tue Sep 27 22:54:54 2011] Size of ../../acisf10903/products/events/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src112_src.evt.gz[events] = 163 counts
[Tue Sep 27 22:54:54 2011] Mean chipx,y = (476.05, 765.07)
[Tue Sep 27 22:54:54 2011] Mean tdetx,y = (3826.07, 3609.95)
[Tue Sep 27 22:54:54 2011] chipx,y range = (456.00-499.00, 743.00-788.00)
[Tue Sep 27 22:54:54 2011] Size of ../../acisf10903/products/events/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src112_bgd.evt.gz[events] = 1091 counts
[Tue Sep 27 22:54:54 2011] ../../acisf10903/products/images/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src112_src.img and ../../acisf10903/products/images/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src112_bgd.img exist, delete to re-create
[Tue Sep 27 22:54:54 2011] ../../acisf10903/products/spectra/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src112_src.pi and ../../acisf10903/products/spectra/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src112_bgd.pi exist, delete to re-create
[Tue Sep 27 22:54:54 2011] Not generating rmf since there are only 52 counts
[Tue Sep 27 22:54:57 2011] ../../acisf10903/products/lightcurves/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src112_src.lc and ../../acisf10903/products/lightcurves/fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src112_bgd.lc exist, delete to re-create
[Tue Sep 27 22:56:15 2011] 184.608
[Tue Sep 27 23:05:36 2011] Updating aperture counts using extracted products
[Tue Sep 27 23:05:36 2011] Error reading totcts from fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src112_src.pi.gz
[Tue Sep 27 23:05:38 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 23:05:38 2011] Using photon index=1.80, rate=0.0022, arf fullrun_ccd2_acisf10903_pi14-548_pass1_cl_src112.arf
[Tue Sep 27 23:05:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 23:05:38 2011] Updating source flux to 3.3e-14
[Tue Sep 27 23:12:24 2011] Source 112 has fewer than 100.000000 counts, skipping spectral fitting