[Thu Oct 27 23:27:20 2011] Detection parameters:
  Position = (438.5, 729.7) = 0 24 52.86 64 9 46.8
  Extent = 0.5" x 0.5", rotation angle = 116 degrees
  Source counts = 251.1 +/- 24.9
  Background counts = 367.9
  Rate = 0.006 +/- 0.0006

[Thu Oct 27 23:27:51 2011] Off-axis axis estimate = 3.42'
[Thu Oct 27 23:35:59 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 23:35:59 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Thu Oct 27 23:35:59 2011] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.861
[Thu Oct 27 23:35:59 2011] Giving source the simple spatial ID 75 for pass 0, mean size = 0.67"
[Thu Oct 27 23:36:02 2011] fullrun_ccd3_acisf10902_pi14-548_cl_pass0_src75.ximg exists
[Thu Oct 27 23:36:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10902_pi14-548_cl_pass0_src75.csv
[Thu Oct 27 23:36:02 2011] fullrun_ccd3_acisf10902_pi14-548_cl_pass0_src75_1.ximg exists
[Thu Oct 27 23:36:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10902_pi14-548_cl_pass0_src75.csv
[Thu Oct 27 23:36:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10902_pi14-548_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10902_pi14-548_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 23:36:06 2011] fullrun_ccd3_acisf10902_pi14-548_cl_pass0_tfrozen_src75.ximg exists
[Thu Oct 27 23:36:06 2011] fullrun_ccd3_acisf10902_pi14-548_cl_pass0_tfrozen_src75_1.ximg exists
[Thu Oct 27 23:36:06 2011] Fit fullrun_ccd3_acisf10902_pi14-548_cl_pass0_tfrozen_src75 appears to have run properly
[Thu Oct 27 23:37:18 2011] Spatial fit model total counts = 2527.860000, observed total counts = 2524.000000
[Thu Oct 27 23:37:18 2011] Offset between fit and detection position for source 141 = 1.040551 pixels
[Thu Oct 27 23:37:18 2011] 2608.665000 total counts/ 2428.210000 bgd. counts: snr = 3.662063
Spatial fit parameters:
  Offset between fit and detection position for source 141 = 1.040551 pixels
  Position = (437.5, 729.5) = 0 24 52.98 64 9 46.4
  Extent = 1.4 (1.1-1.5)", rotation angle = 0
  Source counts = 180.5 +/- 51.1
  Background counts = 2428.2
  Rate = 0.005 +/- 0.001
[Thu Oct 27 23:37:18 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 23:37:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 23:37:18 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 23:37:18 2011] Source does appear to be extended
[Thu Oct 27 23:37:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 23:38:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 23:38:38 2011] Initial guess for spatial extent in simple fitting = 1.38"
[Thu Oct 27 23:38:38 2011] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.126
[Thu Oct 27 23:38:38 2011] Giving source the simple spatial ID 71 for pass 1, mean size = 1.38"
[Thu Oct 27 23:38:42 2011] fullrun_ccd3_acisf10902_pi14-548_cl_pass1_src71.ximg exists
[Thu Oct 27 23:38:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10902_pi14-548_cl_pass1_src71.csv
[Thu Oct 27 23:38:42 2011] fullrun_ccd3_acisf10902_pi14-548_cl_pass1_src71_1.ximg exists
[Thu Oct 27 23:38:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10902_pi14-548_cl_pass1_src71.csv
[Thu Oct 27 23:38:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10902_pi14-548_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10902_pi14-548_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 23:38:46 2011] fullrun_ccd3_acisf10902_pi14-548_cl_pass1_tfrozen_src71.ximg exists
[Thu Oct 27 23:38:46 2011] fullrun_ccd3_acisf10902_pi14-548_cl_pass1_tfrozen_src71_1.ximg exists
[Thu Oct 27 23:38:46 2011] Fit fullrun_ccd3_acisf10902_pi14-548_cl_pass1_tfrozen_src71 appears to have run properly
[Thu Oct 27 23:39:50 2011] Spatial fit model total counts = 2479.680000, observed total counts = 2478.000000
[Thu Oct 27 23:39:50 2011] Offset between fit and detection position for source 141 = 4.217255 pixels
[Thu Oct 27 23:39:50 2011] 2517.588000 total counts/ 1837.950000 bgd. counts: snr = 15.852976
Spatial fit parameters:
  Offset between fit and detection position for source 141 = 4.217255 pixels
  Position = (439.2, 733.4) = 0 24 52.85 64 9 48.3
  Extent = 2.8 (1.0-5.5)", rotation angle = 0
  Source counts = 679.6 +/- 50.2
  Background counts = 1838.0
  Rate = 0.02 +/- 0.001
[Thu Oct 27 23:39:50 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 23:39:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 23:39:50 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 23:39:50 2011] Source does appear to be extended
[Thu Oct 27 23:39:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 23:39:51 2011] Source is confused with source 9
[Thu Oct 27 23:56:03 2011] Not overwriting source region fullrun_ccd3_acisf10902_pi14-548_pass1_cl_src141_src.reg
[Thu Oct 27 23:56:03 2011] Extracting stamp from image fullrun_ccd3_acisf10902_pi14-548_cl_sm2.00.img.gz, (313, 607) - (565, 859)
[Thu Oct 27 23:56:03 2011] Writing fullrun_ccd3_acisf10902_pi14-548_pass1_cl_src141.gif
[Thu Oct 27 23:59:49 2011] ../../acisf10902/products/events/fullrun_ccd3_acisf10902_pi14-548_pass1_cl_src141_src.evt and ../../acisf10902/products/events/fullrun_ccd3_acisf10902_pi14-548_pass1_cl_src141_bgd.evt exist, delete to re-create
[Thu Oct 27 23:59:49 2011] Size of ../../acisf10902/products/events/fullrun_ccd3_acisf10902_pi14-548_pass1_cl_src141_src.evt.gz[events] = 14847 counts
[Thu Oct 27 23:59:49 2011] Mean chipx,y = (616.18, 765.62)
[Thu Oct 27 23:59:49 2011] Mean tdetx,y = (4366.38, 3677.18)
[Thu Oct 27 23:59:49 2011] chipx,y range = (581.00-658.00, 728.00-805.00)
[Thu Oct 27 23:59:49 2011] Size of ../../acisf10902/products/events/fullrun_ccd3_acisf10902_pi14-548_pass1_cl_src141_bgd.evt.gz[events] = 54869 counts
[Thu Oct 27 23:59:49 2011] ../../acisf10902/products/images/fullrun_ccd3_acisf10902_pi14-548_pass1_cl_src141_src.img and ../../acisf10902/products/images/fullrun_ccd3_acisf10902_pi14-548_pass1_cl_src141_bgd.img exist, delete to re-create
[Thu Oct 27 23:59:49 2011] ../../acisf10902/products/spectra/fullrun_ccd3_acisf10902_pi14-548_pass1_cl_src141_src.pi and ../../acisf10902/products/spectra/fullrun_ccd3_acisf10902_pi14-548_pass1_cl_src141_bgd.pi exist, delete to re-create
[Thu Oct 27 23:59:52 2011] ../../acisf10902/products/lightcurves/fullrun_ccd3_acisf10902_pi14-548_pass1_cl_src141_src.lc and ../../acisf10902/products/lightcurves/fullrun_ccd3_acisf10902_pi14-548_pass1_cl_src141_bgd.lc exist, delete to re-create
[Fri Oct 28 00:07:13 2011] Keeping rmf generated by specextract
[Fri Oct 28 00:07:13 2011] 190.704
[Fri Oct 28 00:07:54 2011] Updating aperture counts using extracted products
[Fri Oct 28 00:07:54 2011] Error reading totcts from fullrun_ccd3_acisf10902_pi14-548_pass1_cl_src141_src.pi.gz
[Fri Oct 28 00:08:00 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 00:08:00 2011] Using photon index=1.80, rate=0.0172, arf fullrun_ccd3_acisf10902_pi14-548_pass1_cl_src141.arf
[Fri Oct 28 00:08:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 00:08:00 2011] Updating source flux to 2.5e-13
[Fri Oct 28 00:31:05 2011] Flag c found in src. 141 procflags, skipping spectral fitting