[Wed Sep 28 11:17:05 2011] Detection parameters:
  Position = (536.1, 869.8) = 17 0 58.45 -46 11 8.3
  Extent = 0.5" x 0.5", rotation angle = 111 degrees
  Source counts = 201.4 +/- 14.2
  Background counts = 1.6
  Rate = 0.02 +/- 0.001

[Wed Sep 28 11:17:07 2011] Off-axis axis estimate = 0.29'
[Wed Sep 28 11:17:55 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 11:17:55 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Wed Sep 28 11:17:55 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.856
[Wed Sep 28 11:17:55 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.41"
[Wed Sep 28 11:17:56 2011] fullrun_ccd7_acisf10889_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 28 11:17:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10889_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 11:17:56 2011] fullrun_ccd7_acisf10889_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 28 11:17:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10889_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 11:17:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10889_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10889_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 11:17:56 2011] fullrun_ccd7_acisf10889_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 11:17:56 2011] fullrun_ccd7_acisf10889_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 11:17:56 2011] Fit fullrun_ccd7_acisf10889_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 11:18:01 2011] Spatial fit model total counts = 204.000000, observed total counts = 204.000000
[Wed Sep 28 11:18:01 2011] Offset between fit and detection position for source 1 = 0.722223 pixels
[Wed Sep 28 11:18:01 2011] 204.037400 total counts/ 12.937400 bgd. counts: snr = 53.129678
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.722223 pixels
  Position = (536.6, 870.3) = 17 0 58.45 -46 11 8.3
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 191.1 +/- 14.3
  Background counts = 12.9
  Rate = 0.02 +/- 0.001
[Wed Sep 28 11:18:01 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 11:18:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 11:18:01 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 11:18:01 2011] Source does appear to be extended
[Wed Sep 28 11:18:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 11:18:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 11:18:18 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Sep 28 11:18:18 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.309
[Wed Sep 28 11:18:18 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.40"
[Wed Sep 28 11:18:19 2011] fullrun_ccd7_acisf10889_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 28 11:18:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10889_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 11:18:19 2011] fullrun_ccd7_acisf10889_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 28 11:18:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10889_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 11:18:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10889_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10889_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 11:18:19 2011] fullrun_ccd7_acisf10889_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 11:18:19 2011] fullrun_ccd7_acisf10889_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 11:18:19 2011] Fit fullrun_ccd7_acisf10889_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 11:18:23 2011] Spatial fit model total counts = 204.000000, observed total counts = 204.000000
[Wed Sep 28 11:18:23 2011] Offset between fit and detection position for source 1 = 0.000115 pixels
[Wed Sep 28 11:18:23 2011] 204.040500 total counts/ 12.963500 bgd. counts: snr = 53.069779
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000115 pixels
  Position = (536.6, 870.3) = 17 0 58.45 -46 11 8.3
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 191.1 +/- 14.3
  Background counts = 13.0
  Rate = 0.02 +/- 0.001
[Wed Sep 28 11:18:23 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 11:18:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 11:18:23 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 11:18:23 2011] Source does appear to be extended
[Wed Sep 28 11:18:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 11:19:14 2011] Not overwriting source region fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 28 11:19:14 2011] Extracting stamp from image fullrun_ccd7_acisf10889_pi14-548_cl_sm2.00.img.gz, (518, 852) - (555, 889)
[Wed Sep 28 11:19:14 2011] Writing fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1.gif
[Wed Sep 28 11:19:14 2011] ../../acisf10889/products/events/fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1_src.evt and ../../acisf10889/products/events/fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 28 11:19:14 2011] Size of ../../acisf10889/products/events/fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1_src.evt.gz[events] = 194 counts
[Wed Sep 28 11:19:14 2011] Mean chipx,y = (219.69, 520.63)
[Wed Sep 28 11:19:14 2011] Mean tdetx,y = (4136.69, 2222.63)
[Wed Sep 28 11:19:14 2011] chipx,y range = (203.00-238.00, 502.00-537.00)
[Wed Sep 28 11:19:14 2011] Size of ../../acisf10889/products/events/fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 8 counts
[Wed Sep 28 11:19:14 2011] ../../acisf10889/products/images/fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1_src.img and ../../acisf10889/products/images/fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 28 11:19:14 2011] ../../acisf10889/products/spectra/fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1_src.pi and ../../acisf10889/products/spectra/fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 28 11:19:18 2011] ../../acisf10889/products/lightcurves/fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1_src.lc and ../../acisf10889/products/lightcurves/fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 28 11:19:47 2011] Keeping rmf generated by specextract
[Wed Sep 28 11:19:48 2011] 235.963
[Wed Sep 28 11:19:50 2011] Updating aperture counts using extracted products
[Wed Sep 28 11:19:50 2011] Error reading totcts from fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 28 11:19:50 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 11:19:50 2011] Using photon index=1.80, rate=0.0161, arf fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 11:19:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 11:19:50 2011] Updating source flux to 1.7e-13
[Wed Sep 28 11:20:00 2011] Reading fit data from acisf10889/analysis//spectral/fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1_pl.csv
[Wed Sep 28 11:20:00 2011] Spectral fit parameter nH value = 2.47433e+22
[Wed Sep 28 11:20:00 2011] Spectral fit parameter PhoIndex value = 3.76614
[Wed Sep 28 11:20:00 2011] Failed to get F(0.3-8.0) from acisf10889/analysis//spectral/fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 11:20:00 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 11:20:00 2011] Using Nh = 2.5e+22, photon index=3.77, rate=0.0161, arf fullrun_ccd7_acisf10889_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 11:20:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 11:20:00 2011] Updating source flux to 1.4e-13