[Fri Oct  7 03:21:36 2011] Detection parameters:
  Position = (1186.1, 956.3) = 13 57 4.39 -64 29 21.1
  Extent = 0.8" x 0.7", rotation angle = 157 degrees
  Source counts = 20.6 +/- 5.1
  Background counts = 5.4
  Rate = 0.0003 +/- 9e-05

[Fri Oct  7 03:21:36 2011] Off-axis axis estimate = 0.75'
[Fri Oct  7 03:23:14 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 03:23:14 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Oct  7 03:23:14 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.917
[Fri Oct  7 03:23:14 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.38"
[Fri Oct  7 03:23:15 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass0_src11.ximg exists
[Fri Oct  7 03:23:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10880_pi14-548_cl_pass0_src11.csv
[Fri Oct  7 03:23:15 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Oct  7 03:23:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10880_pi14-548_cl_pass0_src11.csv
[Fri Oct  7 03:23:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10880_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10880_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 03:23:15 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Oct  7 03:23:15 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Oct  7 03:23:15 2011] Fit fullrun_ccd3_acisf10880_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Oct  7 03:23:31 2011] Spatial fit model total counts = 46.973100, observed total counts = 47.000000
[Fri Oct  7 03:23:31 2011] Offset between fit and detection position for source 38 = 0.779229 pixels
[Fri Oct  7 03:23:31 2011] 46.742400 total counts/ 30.676800 bgd. counts: snr = 2.900627
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.779229 pixels
  Position = (1186.7, 956.8) = 13 57 4.38 -64 29 21.1
  Extent = 0.8 (0.5-1.2)", rotation angle = 0
  Source counts = 16.1 +/- 6.8
  Background counts = 30.7
  Rate = 0.0003 +/- 0.0001
[Fri Oct  7 03:23:31 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:23:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:23:31 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 03:23:31 2011] Source does appear to be extended
[Fri Oct  7 03:23:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 03:23:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 03:23:56 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Fri Oct  7 03:23:56 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Fri Oct  7 03:23:56 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.82"
[Fri Oct  7 03:23:56 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass1_src11.ximg exists
[Fri Oct  7 03:23:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10880_pi14-548_cl_pass1_src11.csv
[Fri Oct  7 03:23:56 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass1_src11_1.ximg exists
[Fri Oct  7 03:23:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10880_pi14-548_cl_pass1_src11.csv
[Fri Oct  7 03:23:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10880_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10880_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 03:23:57 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri Oct  7 03:23:58 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Oct  7 03:23:58 2011] Fit fullrun_ccd3_acisf10880_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Oct  7 03:24:13 2011] Spatial fit model total counts = 46.993200, observed total counts = 47.000000
[Fri Oct  7 03:24:13 2011] Offset between fit and detection position for source 38 = 0.001758 pixels
[Fri Oct  7 03:24:13 2011] 46.763400 total counts/ 30.681100 bgd. counts: snr = 2.903439
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.001758 pixels
  Position = (1186.7, 956.8) = 13 57 4.38 -64 29 21.1
  Extent = 0.8 (0.5-1.2)", rotation angle = 0
  Source counts = 16.1 +/- 6.8
  Background counts = 30.7
  Rate = 0.0003 +/- 0.0001
[Fri Oct  7 03:24:13 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:24:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:24:13 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 03:24:13 2011] Source does appear to be extended
[Fri Oct  7 03:24:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 03:28:02 2011] Not overwriting source region fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src38_src.reg
[Fri Oct  7 03:28:02 2011] Extracting stamp from image fullrun_ccd3_acisf10880_pi14-548_cl_sm2.00.img.gz, (1149, 919) - (1224, 994)
[Fri Oct  7 03:28:02 2011] Writing fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src38.gif
[Fri Oct  7 03:28:41 2011] ../../acisf10880/products/events/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src38_src.evt and ../../acisf10880/products/events/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src38_bgd.evt exist, delete to re-create
[Fri Oct  7 03:28:41 2011] Size of ../../acisf10880/products/events/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src38_src.evt.gz[events] = 28 counts
[Fri Oct  7 03:28:41 2011] Mean chipx,y = (975.50, 940.32)
[Fri Oct  7 03:28:41 2011] Mean tdetx,y = (4191.68, 4036.50)
[Fri Oct  7 03:28:41 2011] chipx,y range = (958.00-993.00, 920.00-955.00)
[Fri Oct  7 03:28:41 2011] Size of ../../acisf10880/products/events/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src38_bgd.evt.gz[events] = 201 counts
[Fri Oct  7 03:28:41 2011] ../../acisf10880/products/images/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src38_src.img and ../../acisf10880/products/images/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src38_bgd.img exist, delete to re-create
[Fri Oct  7 03:28:41 2011] ../../acisf10880/products/spectra/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src38_src.pi and ../../acisf10880/products/spectra/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src38_bgd.pi exist, delete to re-create
[Fri Oct  7 03:28:41 2011] Not generating rmf since there are only 16 counts
[Fri Oct  7 03:28:43 2011] ../../acisf10880/products/lightcurves/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src38_src.lc and ../../acisf10880/products/lightcurves/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src38_bgd.lc exist, delete to re-create
[Fri Oct  7 03:29:09 2011] 202.705
[Fri Oct  7 03:29:24 2011] Updating aperture counts using extracted products
[Fri Oct  7 03:29:24 2011] Error reading totcts from fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src38_src.pi.gz
[Fri Oct  7 03:29:24 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 03:29:24 2011] Using photon index=1.80, rate=0.000272, arf fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src38.arf
[Fri Oct  7 03:29:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 03:29:24 2011] Updating source flux to 3.7e-15
[Fri Oct  7 03:29:47 2011] Source 38 has fewer than 100.000000 counts, skipping spectral fitting