[Fri Oct  7 03:21:34 2011] Detection parameters:
  Position = (548.3, 557.0) = 13 57 53.07 -64 32 36.9
  Extent = 1.6" x 1.1", rotation angle = 128 degrees
  Source counts = 64.8 +/- 8.7
  Background counts = 11.2
  Rate = 0.001 +/- 0.0001

[Fri Oct  7 03:21:36 2011] Off-axis axis estimate = 6.50'
[Fri Oct  7 03:23:14 2011] Using EEF radius (= 1.89 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 03:23:14 2011] Initial guess for spatial extent in simple fitting = 1.89"
[Fri Oct  7 03:23:14 2011] source mask rpix=3.8, npix_max = 75, mask sum = 72, frac = 0.953
[Fri Oct  7 03:23:14 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 1.89"
[Fri Oct  7 03:23:15 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass0_src7.ximg exists
[Fri Oct  7 03:23:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10880_pi14-548_cl_pass0_src7.csv
[Fri Oct  7 03:23:15 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Oct  7 03:23:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10880_pi14-548_cl_pass0_src7.csv
[Fri Oct  7 03:23:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10880_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10880_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 03:23:15 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Oct  7 03:23:15 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Oct  7 03:23:15 2011] Fit fullrun_ccd3_acisf10880_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Oct  7 03:23:31 2011] Spatial fit model total counts = 85.595300, observed total counts = 77.000000
[Fri Oct  7 03:23:31 2011] Offset between fit and detection position for source 10 = 1.410673 pixels
[Fri Oct  7 03:23:31 2011] 86.241700 total counts/ 34.322800 bgd. counts: snr = 8.862049
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.410673 pixels
  Position = (549.6, 556.6) = 13 57 53.01 -64 32 37.3
  Extent = 1.7" x 0.7", rotation angle = 39
  Source counts = 51.9 +/- 9.3
  Background counts = 34.3
  Rate = 0.0009 +/- 0.0002
[Fri Oct  7 03:23:31 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:23:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:23:31 2011] Assessing source extent using major
[Fri Oct  7 03:23:31 2011] Source does appear to be extended
[Fri Oct  7 03:23:31 2011] Computing asymmetry using major and minor axis, asym = 2.43
[Fri Oct  7 03:23:31 2011] Source is asymmetric
[Fri Oct  7 03:23:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 03:23:56 2011] Initial guess for spatial extent in simple fitting = 1.20"
[Fri Oct  7 03:23:56 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.038
[Fri Oct  7 03:23:56 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 1.20"
[Fri Oct  7 03:23:56 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass1_src7.ximg exists
[Fri Oct  7 03:23:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10880_pi14-548_cl_pass1_src7.csv
[Fri Oct  7 03:23:56 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Oct  7 03:23:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10880_pi14-548_cl_pass1_src7.csv
[Fri Oct  7 03:23:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10880_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10880_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 03:23:57 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Oct  7 03:23:57 2011] fullrun_ccd3_acisf10880_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Oct  7 03:23:57 2011] Fit fullrun_ccd3_acisf10880_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Oct  7 03:24:13 2011] Spatial fit model total counts = 68.999900, observed total counts = 69.000000
[Fri Oct  7 03:24:13 2011] Offset between fit and detection position for source 10 = 0.720860 pixels
[Fri Oct  7 03:24:13 2011] 69.259000 total counts/ 32.005000 bgd. counts: snr = 6.585125
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.720860 pixels
  Position = (548.9, 556.9) = 13 57 53.06 -64 32 37.2
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 37.3 +/- 8.3
  Background counts = 32.0
  Rate = 0.0006 +/- 0.0001
[Fri Oct  7 03:24:13 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:24:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:24:13 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 03:24:13 2011] Source does appear to be extended
[Fri Oct  7 03:24:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 03:28:02 2011] Not overwriting source region fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src10_src.reg
[Fri Oct  7 03:28:02 2011] Extracting stamp from image fullrun_ccd3_acisf10880_pi14-548_cl_sm2.00.img.gz, (516, 524) - (581, 589)
[Fri Oct  7 03:28:02 2011] Writing fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src10.gif
[Fri Oct  7 03:28:30 2011] ../../acisf10880/products/events/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src10_src.evt and ../../acisf10880/products/events/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Oct  7 03:28:30 2011] Size of ../../acisf10880/products/events/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src10_src.evt.gz[events] = 52 counts
[Fri Oct  7 03:28:30 2011] Mean chipx,y = (395.90, 452.88)
[Fri Oct  7 03:28:30 2011] Mean tdetx,y = (4679.12, 3456.90)
[Fri Oct  7 03:28:30 2011] chipx,y range = (376.00-417.00, 433.00-475.00)
[Fri Oct  7 03:28:30 2011] Size of ../../acisf10880/products/events/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 41 counts
[Fri Oct  7 03:28:30 2011] ../../acisf10880/products/images/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src10_src.img and ../../acisf10880/products/images/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Oct  7 03:28:30 2011] ../../acisf10880/products/spectra/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src10_src.pi and ../../acisf10880/products/spectra/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Oct  7 03:28:30 2011] Not generating rmf since there are only 37 counts
[Fri Oct  7 03:28:32 2011] ../../acisf10880/products/lightcurves/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src10_src.lc and ../../acisf10880/products/lightcurves/fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Oct  7 03:29:09 2011] 176.513
[Fri Oct  7 03:29:24 2011] Updating aperture counts using extracted products
[Fri Oct  7 03:29:24 2011] Error reading totcts from fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Oct  7 03:29:24 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 03:29:24 2011] Using photon index=1.80, rate=0.000629, arf fullrun_ccd3_acisf10880_pi14-548_pass1_cl_src10.arf
[Fri Oct  7 03:29:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 03:29:24 2011] Updating source flux to 9.6e-15
[Fri Oct  7 03:29:47 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting