[Fri Oct  7 03:21:31 2011] Detection parameters:
  Position = (497.4, 615.5) = 13 57 32.43 -64 24 2.4
  Extent = 1.3" x 0.7", rotation angle = 152 degrees
  Source counts = 14.8 +/- 4.5
  Background counts = 5.2
  Rate = 0.0003 +/- 8e-05

[Fri Oct  7 03:21:31 2011] Off-axis axis estimate = 6.80'
[Fri Oct  7 03:23:11 2011] Using EEF radius (= 2.06 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 03:23:11 2011] Initial guess for spatial extent in simple fitting = 2.06"
[Fri Oct  7 03:23:11 2011] source mask rpix=4.2, npix_max = 87, mask sum = 75, frac = 0.854
[Fri Oct  7 03:23:11 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 2.06"
[Fri Oct  7 03:23:12 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass0_src10.ximg exists
[Fri Oct  7 03:23:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10880_pi14-548_cl_pass0_src10.csv
[Fri Oct  7 03:23:12 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Oct  7 03:23:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10880_pi14-548_cl_pass0_src10.csv
[Fri Oct  7 03:23:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10880_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10880_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 03:23:12 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Oct  7 03:23:12 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Oct  7 03:23:12 2011] Fit fullrun_ccd1_acisf10880_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Oct  7 03:23:25 2011] Spatial fit model total counts = 40.429600, observed total counts = 41.000000
[Fri Oct  7 03:23:25 2011] Offset between fit and detection position for source 8 = 1.206796 pixels
[Fri Oct  7 03:23:25 2011] 40.256800 total counts/ 27.477700 bgd. counts: snr = 2.437867
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.206796 pixels
  Position = (497.4, 616.8) = 13 57 32.47 -64 24 2.0
  Extent = 0.8 (0.5-1.2)", rotation angle = 0
  Source counts = 12.8 +/- 6.3
  Background counts = 27.5
  Rate = 0.0002 +/- 0.0001
[Fri Oct  7 03:23:25 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:23:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:23:25 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 03:23:25 2011] Source does appear to be extended
[Fri Oct  7 03:23:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 03:23:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 03:23:53 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Fri Oct  7 03:23:53 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.032
[Fri Oct  7 03:23:53 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.84"
[Fri Oct  7 03:23:54 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass1_src10.ximg exists
[Fri Oct  7 03:23:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10880_pi14-548_cl_pass1_src10.csv
[Fri Oct  7 03:23:54 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Oct  7 03:23:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10880_pi14-548_cl_pass1_src10.csv
[Fri Oct  7 03:23:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10880_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10880_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 03:23:54 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Oct  7 03:23:54 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Oct  7 03:23:54 2011] Fit fullrun_ccd1_acisf10880_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Oct  7 03:24:07 2011] Spatial fit model total counts = 27.148400, observed total counts = 26.000000
[Fri Oct  7 03:24:07 2011] Offset between fit and detection position for source 8 = 0.250323 pixels
[Fri Oct  7 03:24:07 2011] 26.006900 total counts/ 11.507600 bgd. counts: snr = 4.274198
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.250323 pixels
  Position = (497.7, 616.9) = 13 57 32.46 -64 24 2.0
  Extent = 0.9 (0.3-1.7)", rotation angle = 0
  Source counts = 14.5 +/- 5.1
  Background counts = 11.5
  Rate = 0.0002 +/- 9e-05
[Fri Oct  7 03:24:07 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:24:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:24:07 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 03:24:07 2011] Source does appear to be extended
[Fri Oct  7 03:24:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 03:25:36 2011] Not overwriting source region fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src8_src.reg
[Fri Oct  7 03:25:36 2011] Extracting stamp from image fullrun_ccd1_acisf10880_pi14-548_cl_sm2.00.img.gz, (458, 577) - (538, 657)
[Fri Oct  7 03:25:36 2011] Writing fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src8.gif
[Fri Oct  7 03:26:25 2011] ../../acisf10880/products/events/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src8_src.evt and ../../acisf10880/products/events/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Fri Oct  7 03:26:26 2011] Size of ../../acisf10880/products/events/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src8_src.evt.gz[events] = 20 counts
[Fri Oct  7 03:26:26 2011] Mean chipx,y = (430.05, 388.00)
[Fri Oct  7 03:26:26 2011] Mean tdetx,y = (4744.00, 4537.05)
[Fri Oct  7 03:26:26 2011] chipx,y range = (412.00-445.00, 368.00-399.00)
[Fri Oct  7 03:26:26 2011] Size of ../../acisf10880/products/events/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 44 counts
[Fri Oct  7 03:26:26 2011] ../../acisf10880/products/images/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src8_src.img and ../../acisf10880/products/images/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Fri Oct  7 03:26:26 2011] ../../acisf10880/products/spectra/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src8_src.pi and ../../acisf10880/products/spectra/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Fri Oct  7 03:26:26 2011] Not generating rmf since there are only 14 counts
[Fri Oct  7 03:26:28 2011] ../../acisf10880/products/lightcurves/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src8_src.lc and ../../acisf10880/products/lightcurves/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Fri Oct  7 03:26:45 2011] 175.171
[Fri Oct  7 03:29:23 2011] Updating aperture counts using extracted products
[Fri Oct  7 03:29:23 2011] Error reading totcts from fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src8_src.pi.gz
[Fri Oct  7 03:29:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 03:29:23 2011] Using photon index=1.80, rate=0.000245, arf fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src8.arf
[Fri Oct  7 03:29:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 03:29:23 2011] Updating source flux to 3.8e-15
[Fri Oct  7 03:29:35 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting