[Fri Oct  7 03:21:31 2011] Detection parameters:
  Position = (171.7, 346.9) = 13 57 57.24 -64 26 14.1
  Extent = 0.6" x 0.5", rotation angle = 127 degrees
  Source counts = 285.9 +/- 17.4
  Background counts = 16.1
  Rate = 0.005 +/- 0.0003

[Fri Oct  7 03:21:31 2011] Off-axis axis estimate = 7.24'
[Fri Oct  7 03:23:11 2011] Using EEF radius (= 2.33 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 03:23:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 03:23:11 2011] Initial guess for spatial extent in simple fitting = 2.33"
[Fri Oct  7 03:23:11 2011] source mask rpix=4.7, npix_max = 109, mask sum = 103, frac = 0.943
[Fri Oct  7 03:23:11 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.33"
[Fri Oct  7 03:23:12 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 03:23:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10880_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 03:23:12 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 03:23:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10880_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 03:23:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10880_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10880_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 03:23:12 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 03:23:12 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 03:23:12 2011] Fit fullrun_ccd1_acisf10880_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 03:23:25 2011] Warning, spatial fit 1 centroid is now closest to src. 1
[Fri Oct  7 03:23:25 2011] Spatial fit model total counts = 531.813000, observed total counts = 534.000000
[Fri Oct  7 03:23:25 2011] Offset between fit and detection position for source 11 = 1.725931 pixels
[Fri Oct  7 03:23:25 2011] Warning, changing simple spatial fit ID from 1 to 2
[Fri Oct  7 03:23:25 2011] 377.998390 total counts/ 5.469390 bgd. counts: snr = 159.290781
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.725931 pixels
  Position = (172.0, 348.6) = 13 57 57.26 -64 26 13.5
  Extent = 1.5 (1.4-1.7)", rotation angle = 0
  Source counts = 372.5 +/- 19.4
  Background counts = 5.5
  Rate = 0.006 +/- 0.0003
[Fri Oct  7 03:23:25 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:23:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:23:25 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 03:23:25 2011] Source does appear to be extended
[Fri Oct  7 03:23:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 03:23:25 2011] Source is confused with source 1
[Fri Oct  7 03:23:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 03:23:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 03:23:53 2011] Initial guess for spatial extent in simple fitting = 1.53"
[Fri Oct  7 03:23:53 2011] source mask rpix=3.1, npix_max = 52, mask sum = 50, frac = 0.956
[Fri Oct  7 03:23:53 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.53"
[Fri Oct  7 03:23:54 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 03:23:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10880_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 03:23:54 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 03:23:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10880_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 03:23:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10880_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10880_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 03:23:54 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 03:23:54 2011] fullrun_ccd1_acisf10880_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 03:23:54 2011] Fit fullrun_ccd1_acisf10880_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 03:24:07 2011] Warning, spatial fit 1 centroid is now closest to src. 6
[Fri Oct  7 03:24:07 2011] Spatial fit model total counts = 511.491000, observed total counts = 512.000000
[Fri Oct  7 03:24:07 2011] Offset between fit and detection position for source 11 = 1.541666 pixels
[Fri Oct  7 03:24:07 2011] Warning, changing simple spatial fit ID from 1 to 2
[Fri Oct  7 03:24:07 2011] 287.034700 total counts/ 47.343700 bgd. counts: snr = 34.835386
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.541666 pixels
  Position = (172.2, 347.1) = 13 57 57.24 -64 26 14.2
  Extent = 1.4 (1.2-1.6)", rotation angle = 0
  Source counts = 239.7 +/- 16.9
  Background counts = 47.3
  Rate = 0.004 +/- 0.0003
[Fri Oct  7 03:24:07 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:24:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:24:07 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 03:24:07 2011] Source does appear to be extended
[Fri Oct  7 03:24:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 03:25:36 2011] Not overwriting source region fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11_src.reg
[Fri Oct  7 03:25:36 2011] Extracting stamp from image fullrun_ccd1_acisf10880_pi14-548_cl_sm2.00.img.gz, (109, 284) - (235, 410)
[Fri Oct  7 03:25:36 2011] Writing fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11.gif
[Fri Oct  7 03:25:37 2011] ../../acisf10880/products/events/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11_src.evt and ../../acisf10880/products/events/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Oct  7 03:25:37 2011] Size of ../../acisf10880/products/events/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11_src.evt.gz[events] = 479 counts
[Fri Oct  7 03:25:37 2011] Mean chipx,y = (75.80, 155.86)
[Fri Oct  7 03:25:37 2011] Mean tdetx,y = (4976.14, 4182.80)
[Fri Oct  7 03:25:37 2011] chipx,y range = (48.00-103.00, 130.00-180.00)
[Fri Oct  7 03:25:37 2011] Size of ../../acisf10880/products/events/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 121 counts
[Fri Oct  7 03:25:37 2011] ../../acisf10880/products/images/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11_src.img and ../../acisf10880/products/images/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Oct  7 03:25:37 2011] ../../acisf10880/products/spectra/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11_src.pi and ../../acisf10880/products/spectra/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Oct  7 03:25:40 2011] ../../acisf10880/products/lightcurves/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11_src.lc and ../../acisf10880/products/lightcurves/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Oct  7 03:26:45 2011] Keeping rmf generated by specextract
[Fri Oct  7 03:26:45 2011] 175.097
[Fri Oct  7 03:29:23 2011] Updating aperture counts using extracted products
[Fri Oct  7 03:29:23 2011] Error reading totcts from fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Oct  7 03:29:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 03:29:23 2011] Using photon index=1.80, rate=0.00405, arf fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11.arf
[Fri Oct  7 03:29:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 03:29:23 2011] Updating source flux to 6.3e-14
[Fri Oct  7 03:29:35 2011] Flag c found in src. 11 procflags, skipping spectral fitting
[Fri Oct  7 03:29:43 2011] Reading fit data from acisf10880/analysis//spectral/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11_pl.csv
[Fri Oct  7 03:29:43 2011] Spectral fit parameter nH value = 1.91404e+22
[Fri Oct  7 03:29:43 2011] Spectral fit parameter PhoIndex value = 2.00258
[Fri Oct  7 03:29:43 2011] Failed to get F(0.3-8.0) from acisf10880/analysis//spectral/fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 03:29:43 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 03:29:43 2011] Using Nh = 1.9e+22, photon index=2.00, rate=0.00405, arf fullrun_ccd1_acisf10880_pi14-548_pass1_cl_src11.arf
[Fri Oct  7 03:29:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 03:29:43 2011] Updating source flux to 7.5e-14