[Fri Oct  7 03:21:28 2011] Detection parameters:
  Position = (467.9, 807.3) = 13 56 19.88 -64 25 1.5
  Extent = 1.9" x 1.5", rotation angle = 62 degrees
  Source counts = 134.1 +/- 12.5
  Background counts = 22.9
  Rate = 0.002 +/- 0.0002

[Fri Oct  7 03:21:30 2011] Off-axis axis estimate = 6.33'
[Fri Oct  7 03:23:07 2011] Using EEF radius (= 1.80 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 03:23:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 03:23:07 2011] Initial guess for spatial extent in simple fitting = 1.80"
[Fri Oct  7 03:23:07 2011] source mask rpix=3.7, npix_max = 69, mask sum = 64, frac = 0.923
[Fri Oct  7 03:23:07 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.80"
[Fri Oct  7 03:23:10 2011] fullrun_ccd0_acisf10880_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 03:23:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10880_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 03:23:10 2011] fullrun_ccd0_acisf10880_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 03:23:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10880_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 03:23:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10880_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10880_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 03:23:11 2011] fullrun_ccd0_acisf10880_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 03:23:11 2011] fullrun_ccd0_acisf10880_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 03:23:11 2011] Fit fullrun_ccd0_acisf10880_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 03:23:24 2011] Spatial fit model total counts = 158.327000, observed total counts = 159.000000
[Fri Oct  7 03:23:24 2011] Offset between fit and detection position for source 1 = 0.794065 pixels
[Fri Oct  7 03:23:24 2011] 158.533600 total counts/ 35.985600 bgd. counts: snr = 20.428753
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.794065 pixels
  Position = (468.4, 807.9) = 13 56 19.88 -64 25 1.4
  Extent = 1.6 (1.4-1.8)", rotation angle = 0
  Source counts = 122.5 +/- 12.6
  Background counts = 36.0
  Rate = 0.002 +/- 0.0002
[Fri Oct  7 03:23:24 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:23:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:23:24 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 03:23:24 2011] Source does appear to be extended
[Fri Oct  7 03:23:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 03:23:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 03:23:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 03:23:52 2011] Initial guess for spatial extent in simple fitting = 1.57"
[Fri Oct  7 03:23:52 2011] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.031
[Fri Oct  7 03:23:52 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.57"
[Fri Oct  7 03:23:52 2011] fullrun_ccd0_acisf10880_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 03:23:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10880_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 03:23:52 2011] fullrun_ccd0_acisf10880_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 03:23:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10880_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 03:23:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10880_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10880_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 03:23:53 2011] fullrun_ccd0_acisf10880_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 03:23:53 2011] fullrun_ccd0_acisf10880_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 03:23:53 2011] Fit fullrun_ccd0_acisf10880_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 03:24:05 2011] Spatial fit model total counts = 155.828000, observed total counts = 156.000000
[Fri Oct  7 03:24:05 2011] Offset between fit and detection position for source 1 = 0.038489 pixels
[Fri Oct  7 03:24:05 2011] 155.912600 total counts/ 38.390600 bgd. counts: snr = 18.967353
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.038489 pixels
  Position = (468.4, 808.0) = 13 56 19.88 -64 25 1.4
  Extent = 1.5 (1.3-1.8)", rotation angle = 0
  Source counts = 117.5 +/- 12.5
  Background counts = 38.4
  Rate = 0.002 +/- 0.0002
[Fri Oct  7 03:24:05 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 03:24:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 03:24:05 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 03:24:05 2011] Source does appear to be extended
[Fri Oct  7 03:24:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 03:24:32 2011] Not overwriting source region fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1_src.reg
[Fri Oct  7 03:24:32 2011] Extracting stamp from image fullrun_ccd0_acisf10880_pi14-548_cl_sm2.00.img.gz, (400, 739) - (537, 877)
[Fri Oct  7 03:24:32 2011] Writing fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1.gif
[Fri Oct  7 03:24:34 2011] ../../acisf10880/products/events/fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1_src.evt and ../../acisf10880/products/events/fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct  7 03:24:34 2011] Size of ../../acisf10880/products/events/fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1_src.evt.gz[events] = 148 counts
[Fri Oct  7 03:24:34 2011] Mean chipx,y = (411.22, 737.14)
[Fri Oct  7 03:24:34 2011] Mean tdetx,y = (3798.14, 4720.78)
[Fri Oct  7 03:24:34 2011] chipx,y range = (386.00-432.00, 716.00-760.00)
[Fri Oct  7 03:24:34 2011] Size of ../../acisf10880/products/events/fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 181 counts
[Fri Oct  7 03:24:34 2011] ../../acisf10880/products/images/fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1_src.img and ../../acisf10880/products/images/fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct  7 03:24:34 2011] ../../acisf10880/products/spectra/fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1_src.pi and ../../acisf10880/products/spectra/fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct  7 03:24:37 2011] ../../acisf10880/products/lightcurves/fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1_src.lc and ../../acisf10880/products/lightcurves/fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct  7 03:25:35 2011] Keeping rmf generated by specextract
[Fri Oct  7 03:25:35 2011] 181.182
[Fri Oct  7 03:29:23 2011] Updating aperture counts using extracted products
[Fri Oct  7 03:29:23 2011] Error reading totcts from fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct  7 03:29:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 03:29:23 2011] Using photon index=1.80, rate=0.00198, arf fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 03:29:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 03:29:23 2011] Updating source flux to 3e-14
[Fri Oct  7 03:29:35 2011] Reading fit data from acisf10880/analysis//spectral/fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct  7 03:29:35 2011] Spectral fit parameter nH value = 9.09193e+21
[Fri Oct  7 03:29:35 2011] Spectral fit parameter PhoIndex value = 1.55177
[Fri Oct  7 03:29:35 2011] Failed to get F(0.3-8.0) from acisf10880/analysis//spectral/fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 03:29:35 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 03:29:35 2011] Using Nh = 9.1e+21, photon index=1.55, rate=0.00198, arf fullrun_ccd0_acisf10880_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 03:29:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 03:29:35 2011] Updating source flux to 3.4e-14