[Wed Sep 28 00:15:25 2011] Detection parameters:
  Position = (510.8, 506.1) = 8 33 10.30 33 7 29.6
  Extent = 0.5" x 0.5", rotation angle = 76 degrees
  Source counts = 140.9 +/- 12.0
  Background counts = 2.1
  Rate = 0.005 +/- 0.0004

[Wed Sep 28 00:15:28 2011] Off-axis axis estimate = 2.59'
[Wed Sep 28 00:16:29 2011] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 00:16:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 00:16:29 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Wed Sep 28 00:16:29 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.963
[Wed Sep 28 00:16:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.51"
[Wed Sep 28 00:16:30 2011] fullrun_ccd7_acisf10878_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 28 00:16:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10878_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 00:16:30 2011] fullrun_ccd7_acisf10878_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 28 00:16:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10878_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 00:16:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10878_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10878_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 00:16:31 2011] fullrun_ccd7_acisf10878_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 00:16:31 2011] fullrun_ccd7_acisf10878_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 00:16:31 2011] Fit fullrun_ccd7_acisf10878_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 00:16:44 2011] Spatial fit model total counts = 145.035000, observed total counts = 148.000000
[Wed Sep 28 00:16:44 2011] Offset between fit and detection position for source 1 = 0.751948 pixels
[Wed Sep 28 00:16:44 2011] 144.323280 total counts/ 4.832280 bgd. counts: snr = 63.455627
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.751948 pixels
  Position = (511.4, 506.6) = 8 33 10.30 33 7 29.6
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 139.5 +/- 12.0
  Background counts = 4.8
  Rate = 0.005 +/- 0.0004
[Wed Sep 28 00:16:44 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 00:16:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 00:16:44 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 00:16:44 2011] Source does appear to be extended
[Wed Sep 28 00:16:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:17:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 00:17:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 00:17:04 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Wed Sep 28 00:17:04 2011] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.746
[Wed Sep 28 00:17:04 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.61"
[Wed Sep 28 00:17:05 2011] fullrun_ccd7_acisf10878_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 28 00:17:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10878_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 00:17:05 2011] fullrun_ccd7_acisf10878_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 28 00:17:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10878_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 00:17:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10878_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10878_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 00:17:05 2011] fullrun_ccd7_acisf10878_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 00:17:05 2011] fullrun_ccd7_acisf10878_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 00:17:05 2011] Fit fullrun_ccd7_acisf10878_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 00:17:13 2011] Spatial fit model total counts = 145.962000, observed total counts = 148.000000
[Wed Sep 28 00:17:13 2011] Offset between fit and detection position for source 1 = 0.030588 pixels
[Wed Sep 28 00:17:13 2011] 145.896150 total counts/ 7.270150 bgd. counts: snr = 51.413007
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.030588 pixels
  Position = (511.4, 506.6) = 8 33 10.30 33 7 29.6
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 138.6 +/- 12.1
  Background counts = 7.3
  Rate = 0.005 +/- 0.0004
[Wed Sep 28 00:17:13 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 00:17:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 00:17:13 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 00:17:13 2011] Source does appear to be extended
[Wed Sep 28 00:17:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:18:19 2011] Not overwriting source region fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 28 00:18:19 2011] Extracting stamp from image fullrun_ccd7_acisf10878_pi14-548_cl_sm2.00.img.gz, (484, 479) - (539, 534)
[Wed Sep 28 00:18:19 2011] Writing fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1.gif
[Wed Sep 28 00:18:21 2011] ../../acisf10878/products/events/fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1_src.evt and ../../acisf10878/products/events/fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 28 00:18:21 2011] Size of ../../acisf10878/products/events/fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1_src.evt.gz[events] = 143 counts
[Wed Sep 28 00:18:21 2011] Mean chipx,y = (419.94, 282.66)
[Wed Sep 28 00:18:21 2011] Mean tdetx,y = (4336.94, 1984.66)
[Wed Sep 28 00:18:21 2011] chipx,y range = (401.00-439.00, 265.00-301.00)
[Wed Sep 28 00:18:21 2011] Size of ../../acisf10878/products/events/fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 18 counts
[Wed Sep 28 00:18:21 2011] ../../acisf10878/products/images/fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1_src.img and ../../acisf10878/products/images/fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 28 00:18:21 2011] ../../acisf10878/products/spectra/fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1_src.pi and ../../acisf10878/products/spectra/fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 28 00:18:24 2011] ../../acisf10878/products/lightcurves/fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1_src.lc and ../../acisf10878/products/lightcurves/fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 28 00:19:41 2011] Keeping rmf generated by specextract
[Wed Sep 28 00:19:41 2011] 228.441
[Wed Sep 28 00:19:44 2011] Updating aperture counts using extracted products
[Wed Sep 28 00:19:44 2011] Error reading totcts from fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 28 00:19:44 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 00:19:44 2011] Using photon index=1.80, rate=0.0051, arf fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 00:19:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 00:19:44 2011] Updating source flux to 3.9e-14
[Wed Sep 28 00:20:01 2011] Reading fit data from acisf10878/analysis//spectral/fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1_pl.csv
[Wed Sep 28 00:20:01 2011] Spectral fit parameter nH value = 2.18276e+21
[Wed Sep 28 00:20:01 2011] Spectral fit parameter PhoIndex value = 3.73077
[Wed Sep 28 00:20:01 2011] Failed to get F(0.3-8.0) from acisf10878/analysis//spectral/fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 00:20:01 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 00:20:01 2011] Using Nh = 2.2e+21, photon index=3.73, rate=0.0051, arf fullrun_ccd7_acisf10878_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 00:20:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 00:20:01 2011] Updating source flux to 2.5e-14