[Fri Sep 30 02:54:57 2011] Detection parameters:
  Position = (1016.6, 449.1) = 14 17 54.94 52 41 44.0
  Extent = 1.1" x 0.6", rotation angle = 101 degrees
  Source counts = 69.6 +/- 8.4
  Background counts = 1.4
  Rate = 0.004 +/- 0.0005

[Fri Sep 30 02:54:58 2011] Off-axis axis estimate = 4.72'
[Fri Sep 30 02:55:40 2011] Using EEF radius (= 1.07 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:55:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 02:55:40 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Fri Sep 30 02:55:40 2011] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.906
[Fri Sep 30 02:55:40 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.07"
[Fri Sep 30 02:55:40 2011] fullrun_ccd0_acisf10877_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 02:55:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10877_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 02:55:40 2011] fullrun_ccd0_acisf10877_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 02:55:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10877_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 02:55:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10877_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10877_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:55:41 2011] fullrun_ccd0_acisf10877_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 02:55:41 2011] fullrun_ccd0_acisf10877_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 02:55:41 2011] Fit fullrun_ccd0_acisf10877_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 02:55:48 2011] Spatial fit model total counts = 80.984000, observed total counts = 81.000000
[Fri Sep 30 02:55:48 2011] Offset between fit and detection position for source 1 = 0.586730 pixels
[Fri Sep 30 02:55:48 2011] 83.178500 total counts/ 23.781600 bgd. counts: snr = 12.179887
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.586730 pixels
  Position = (1017.1, 448.9) = 14 17 54.94 52 41 43.6
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 59.4 +/- 9.1
  Background counts = 23.8
  Rate = 0.004 +/- 0.0006
[Fri Sep 30 02:55:48 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 02:55:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 02:55:48 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 02:55:48 2011] Source does appear to be extended
[Fri Sep 30 02:55:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:56:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:56:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 02:56:05 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Fri Sep 30 02:56:05 2011] source mask rpix=1.5, npix_max = 16, mask sum = 15, frac = 0.906
[Fri Sep 30 02:56:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.75"
[Fri Sep 30 02:56:06 2011] fullrun_ccd0_acisf10877_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 02:56:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10877_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 02:56:06 2011] fullrun_ccd0_acisf10877_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 02:56:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10877_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 02:56:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10877_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10877_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:56:06 2011] fullrun_ccd0_acisf10877_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 02:56:06 2011] fullrun_ccd0_acisf10877_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 02:56:06 2011] Fit fullrun_ccd0_acisf10877_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 02:56:17 2011] Spatial fit model total counts = 78.174900, observed total counts = 80.000000
[Fri Sep 30 02:56:17 2011] Offset between fit and detection position for source 1 = 0.137024 pixels
[Fri Sep 30 02:56:17 2011] 80.199200 total counts/ 24.719100 bgd. counts: snr = 11.158888
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.137024 pixels
  Position = (1017.2, 448.8) = 14 17 54.93 52 41 43.6
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 55.5 +/- 9.0
  Background counts = 24.7
  Rate = 0.003 +/- 0.0006
[Fri Sep 30 02:56:17 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 02:56:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 02:56:17 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 02:56:17 2011] Source does appear to be extended
[Fri Sep 30 02:56:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:56:34 2011] Not overwriting source region fullrun_ccd0_acisf10877_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 30 02:56:34 2011] Extracting stamp from image fullrun_ccd0_acisf10877_pi14-548_cl_sm2.00.img.gz, (985, 416) - (1050, 481)
[Fri Sep 30 02:56:34 2011] Writing fullrun_ccd0_acisf10877_pi14-548_pass1_cl_src1.gif
[Fri Sep 30 02:56:35 2011] ../../acisf10877/products/events/fullrun_ccd0_acisf10877_pi14-548_pass1_cl_src1_src.evt and ../../acisf10877/products/events/fullrun_ccd0_acisf10877_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 30 02:56:35 2011] Size of ../../acisf10877/products/events/fullrun_ccd0_acisf10877_pi14-548_pass1_cl_src1_src.evt.gz[events] = 67 counts
[Fri Sep 30 02:56:35 2011] Mean chipx,y = (930.70, 503.01)
[Fri Sep 30 02:56:35 2011] Mean tdetx,y = (3564.01, 4201.30)
[Fri Sep 30 02:56:35 2011] chipx,y range = (912.00-949.00, 486.00-522.00)
[Fri Sep 30 02:56:35 2011] Size of ../../acisf10877/products/events/fullrun_ccd0_acisf10877_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 8 counts
[Fri Sep 30 02:56:35 2011] ../../acisf10877/products/images/fullrun_ccd0_acisf10877_pi14-548_pass1_cl_src1_src.img and ../../acisf10877/products/images/fullrun_ccd0_acisf10877_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 30 02:56:35 2011] ../../acisf10877/products/spectra/fullrun_ccd0_acisf10877_pi14-548_pass1_cl_src1_src.pi and ../../acisf10877/products/spectra/fullrun_ccd0_acisf10877_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 30 02:56:35 2011] Not generating rmf since there are only 55 counts
[Fri Sep 30 02:56:39 2011] ../../acisf10877/products/lightcurves/fullrun_ccd0_acisf10877_pi14-548_pass1_cl_src1_src.lc and ../../acisf10877/products/lightcurves/fullrun_ccd0_acisf10877_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 30 02:57:04 2011] 180.209
[Fri Sep 30 02:59:35 2011] Updating aperture counts using extracted products
[Fri Sep 30 02:59:35 2011] Error reading totcts from fullrun_ccd0_acisf10877_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 30 02:59:35 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 02:59:35 2011] Using photon index=1.80, rate=0.00342, arf fullrun_ccd0_acisf10877_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 02:59:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 02:59:35 2011] Updating source flux to 4.5e-14
[Fri Sep 30 02:59:38 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 02:59:44 2011] acisf10877/analysis//spectral/fullrun_ccd0_acisf10877_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete