[Wed Aug  8 00:35:35 2012] Detection parameters:
  Position = (177.5, 820.2) = 12 28 5.89 44 10 58.9
  Extent = 1.1" x 0.7", rotation angle = 90 degrees
  Source counts = 66.0 +/- 8.4
  Background counts = 4.0
  Rate = 0.001 +/- 0.0001

[Wed Aug  8 00:35:36 2012] Off-axis axis estimate = 4.21'
[Wed Aug  8 00:36:45 2012] Using EEF radius (= 0.90 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 00:36:45 2012] Initial guess for spatial extent in simple fitting = 0.90"
[Wed Aug  8 00:36:45 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.161
[Wed Aug  8 00:36:45 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.90"
[Wed Aug  8 00:36:46 2012] fullrun_ccd6_acisf10875_pi14-548_cl_pass0_src3.ximg exists
[Wed Aug  8 00:36:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10875_pi14-548_cl_pass0_src3.csv
[Wed Aug  8 00:36:46 2012] fullrun_ccd6_acisf10875_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Aug  8 00:36:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10875_pi14-548_cl_pass0_src3.csv
[Wed Aug  8 00:36:46 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10875_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10875_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 00:36:47 2012] fullrun_ccd6_acisf10875_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug  8 00:36:47 2012] fullrun_ccd6_acisf10875_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug  8 00:36:47 2012] Fit fullrun_ccd6_acisf10875_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Aug  8 00:36:59 2012] Spatial fit model total counts = 72.022700, observed total counts = 70.000000
[Wed Aug  8 00:36:59 2012] Offset between fit and detection position for source 5 = 0.848453 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.848453 pixels
  Position = (178.1, 820.9) = 12 28 5.89 44 10 59.0
  Extent = 1.2 (1.0-1.4)", rotation angle = 0
  Source counts = 71.7 +/- 8.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0001
[Wed Aug  8 00:36:59 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 00:36:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 00:36:59 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 00:36:59 2012] Source does appear to be extended
[Wed Aug  8 00:36:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 00:37:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 00:37:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  8 00:37:24 2012] Initial guess for spatial extent in simple fitting = 1.17"
[Wed Aug  8 00:37:24 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.087
[Wed Aug  8 00:37:24 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 1.17"
[Wed Aug  8 00:37:24 2012] fullrun_ccd6_acisf10875_pi14-548_cl_pass1_src3.ximg exists
[Wed Aug  8 00:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10875_pi14-548_cl_pass1_src3.csv
[Wed Aug  8 00:37:24 2012] fullrun_ccd6_acisf10875_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Aug  8 00:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10875_pi14-548_cl_pass1_src3.csv
[Wed Aug  8 00:37:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10875_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10875_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 00:37:25 2012] fullrun_ccd6_acisf10875_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug  8 00:37:25 2012] fullrun_ccd6_acisf10875_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug  8 00:37:25 2012] Fit fullrun_ccd6_acisf10875_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Aug  8 00:37:37 2012] Spatial fit model total counts = 73.245300, observed total counts = 70.000000
[Wed Aug  8 00:37:37 2012] Offset between fit and detection position for source 5 = 0.080606 pixels
[Wed Aug  8 00:37:37 2012] 72.950333 total counts/ 0.014132 bgd. counts: snr = 613.526938
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.080606 pixels
  Position = (178.1, 821.0) = 12 28 5.89 44 10 59.0
  Extent = 1.2 (1.0-1.4)", rotation angle = 0
  Source counts = 72.9 +/- 8.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0001
[Wed Aug  8 00:37:37 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 00:37:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 00:37:37 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 00:37:37 2012] Source does appear to be extended
[Wed Aug  8 00:37:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 00:38:53 2012] Not overwriting source region fullrun_ccd6_acisf10875_pi14-548_pass1_cl_src5_src.reg
[Wed Aug  8 00:38:53 2012] Extracting stamp from image fullrun_ccd6_acisf10875_pi14-548_cl_sm2.00.img.gz, (124, 767) - (232, 875)
[Wed Aug  8 00:38:53 2012] Writing fullrun_ccd6_acisf10875_pi14-548_pass1_cl_src5.gif
[Wed Aug  8 00:39:00 2012] ../../acisf10875/products/events/fullrun_ccd6_acisf10875_pi14-548_pass1_cl_src5_src.evt and ../../acisf10875/products/events/fullrun_ccd6_acisf10875_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Wed Aug  8 00:39:00 2012] Size of ../../acisf10875/products/events/fullrun_ccd6_acisf10875_pi14-548_pass1_cl_src5_src.evt.gz[events] = 71 counts
[Wed Aug  8 00:39:00 2012] Mean chipx,y = (904.63, 894.59)
[Wed Aug  8 00:39:00 2012] Mean tdetx,y = (3779.63, 2596.59)
[Wed Aug  8 00:39:00 2012] chipx,y range = (885.00-923.00, 876.00-915.00)
[Wed Aug  8 00:39:00 2012] Size of ../../acisf10875/products/events/fullrun_ccd6_acisf10875_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 81 counts
[Wed Aug  8 00:39:00 2012] ../../acisf10875/products/images/fullrun_ccd6_acisf10875_pi14-548_pass1_cl_src5_src.img and ../../acisf10875/products/images/fullrun_ccd6_acisf10875_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Wed Aug  8 00:39:00 2012] ../../acisf10875/products/spectra/fullrun_ccd6_acisf10875_pi14-548_pass1_cl_src5_src.pi and ../../acisf10875/products/spectra/fullrun_ccd6_acisf10875_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Wed Aug  8 00:39:00 2012] Not generating rmf since there are only 72 counts
[Wed Aug  8 00:39:03 2012] ../../acisf10875/products/lightcurves/fullrun_ccd6_acisf10875_pi14-548_pass1_cl_src5_src.lc and ../../acisf10875/products/lightcurves/fullrun_ccd6_acisf10875_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Wed Aug  8 00:39:37 2012] 196.521
[Wed Aug  8 00:41:32 2012] Updating aperture counts using extracted products
[Wed Aug  8 00:41:32 2012] Error reading totcts from fullrun_ccd6_acisf10875_pi14-548_pass1_cl_src5_src.pi.gz
[Wed Aug  8 00:41:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 00:41:32 2012] Using photon index=1.80, rate=0.00123, arf fullrun_ccd6_acisf10875_pi14-548_pass1_cl_src5.arf
[Wed Aug  8 00:41:32 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Aug  8 00:41:32 2012] Updating source flux to 1.4e-14
[Wed Aug  8 00:42:01 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting