[Fri Oct 21 04:41:41 2011] Detection parameters:
  Position = (885.4, 685.1) = 1 23 0.70 33 29 7.1
  Extent = 0.8" x 0.5", rotation angle = 1 degrees
  Source counts = 138.6 +/- 11.9
  Background counts = 2.4
  Rate = 0.02 +/- 0.002

[Fri Oct 21 04:41:42 2011] Off-axis axis estimate = 3.87'
[Fri Oct 21 04:42:12 2011] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 04:42:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 04:42:12 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Fri Oct 21 04:42:12 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.121
[Fri Oct 21 04:42:12 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.79"
[Fri Oct 21 04:42:13 2011] fullrun_ccd7_acisf10867_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 04:42:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10867_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 04:42:13 2011] fullrun_ccd7_acisf10867_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 04:42:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10867_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 04:42:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10867_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10867_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 04:42:13 2011] fullrun_ccd7_acisf10867_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 04:42:13 2011] fullrun_ccd7_acisf10867_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 04:42:13 2011] Fit fullrun_ccd7_acisf10867_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 04:42:17 2011] Source 1 is offset by -6.008352 and -7.311574 pixels which is larger than
2 X fitted extent = 0.805976 x 0.805976, not incorporating fit results
[Fri Oct 21 04:42:17 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 04:42:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 04:42:17 2011] Assessing source extent using major
[Fri Oct 21 04:42:17 2011] Source does appear to be extended
[Fri Oct 21 04:42:17 2011] Computing asymmetry using major and minor axis, asym = 1.58
[Fri Oct 21 04:42:17 2011] Source is asymmetric
[Fri Oct 21 04:42:29 2011] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 04:42:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 04:42:29 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Fri Oct 21 04:42:29 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.121
[Fri Oct 21 04:42:29 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.79"
[Fri Oct 21 04:42:29 2011] fullrun_ccd7_acisf10867_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 04:42:29 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10867_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 04:42:29 2011] fullrun_ccd7_acisf10867_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 04:42:29 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10867_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 04:42:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10867_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10867_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 04:42:29 2011] fullrun_ccd7_acisf10867_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 04:42:29 2011] fullrun_ccd7_acisf10867_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 04:42:29 2011] Fit fullrun_ccd7_acisf10867_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 04:42:33 2011] Spatial fit model total counts = 138.789000, observed total counts = 140.000000
[Fri Oct 21 04:42:33 2011] Offset between fit and detection position for source 1 = 0.674285 pixels
[Fri Oct 21 04:42:33 2011] 138.441390 total counts/ 8.025390 bgd. counts: snr = 46.036023
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.674285 pixels
  Position = (885.9, 685.6) = 1 23 0.70 33 29 7.1
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 130.4 +/- 11.8
  Background counts = 8.0
  Rate = 0.02 +/- 0.002
[Fri Oct 21 04:42:33 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 04:42:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 04:42:33 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 04:42:33 2011] Source does appear to be extended
[Fri Oct 21 04:42:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 04:43:15 2011] Not overwriting source region fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 21 04:43:15 2011] Extracting stamp from image fullrun_ccd7_acisf10867_pi14-548_cl_sm2.00.img.gz, (847, 647) - (925, 725)
[Fri Oct 21 04:43:15 2011] Writing fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1.gif
[Fri Oct 21 04:43:16 2011] ../../acisf10867/products/events/fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1_src.evt and ../../acisf10867/products/events/fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 21 04:43:16 2011] Size of ../../acisf10867/products/events/fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1_src.evt.gz[events] = 139 counts
[Fri Oct 21 04:43:16 2011] Mean chipx,y = (628.19, 690.09)
[Fri Oct 21 04:43:16 2011] Mean tdetx,y = (4545.19, 2392.09)
[Fri Oct 21 04:43:16 2011] chipx,y range = (609.00-647.00, 671.00-709.00)
[Fri Oct 21 04:43:16 2011] Size of ../../acisf10867/products/events/fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 16 counts
[Fri Oct 21 04:43:16 2011] ../../acisf10867/products/images/fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1_src.img and ../../acisf10867/products/images/fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 21 04:43:16 2011] ../../acisf10867/products/spectra/fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1_src.pi and ../../acisf10867/products/spectra/fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 21 04:43:18 2011] ../../acisf10867/products/lightcurves/fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1_src.lc and ../../acisf10867/products/lightcurves/fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 21 04:43:40 2011] Keeping rmf generated by specextract
[Fri Oct 21 04:43:40 2011] 223.936
[Fri Oct 21 04:43:42 2011] Updating aperture counts using extracted products
[Fri Oct 21 04:43:42 2011] Error reading totcts from fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 21 04:43:42 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 04:43:42 2011] Using photon index=1.80, rate=0.0185, arf fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 04:43:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 04:43:42 2011] Updating source flux to 1.4e-13
[Fri Oct 21 04:43:48 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Fri Oct 21 04:43:55 2011] Reading fit data from acisf10867/analysis//spectral/fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 21 04:43:55 2011] Spectral fit parameter nH value = 1.96956e+21
[Fri Oct 21 04:43:55 2011] Spectral fit parameter PhoIndex value = 2.42497
[Fri Oct 21 04:43:55 2011] Failed to get F(0.3-8.0) from acisf10867/analysis//spectral/fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 04:43:55 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 04:43:55 2011] Using Nh = 2e+21, photon index=2.42, rate=0.0185, arf fullrun_ccd7_acisf10867_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 04:43:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 04:43:55 2011] Updating source flux to 1.2e-13