[Thu Sep 29 01:25:47 2011] Detection parameters:
  Position = (371.2, 517.2) = 5 28 4.53 -52 54 44.7
  Extent = 0.7" x 0.5", rotation angle = 134 degrees
  Source counts = 16.7 +/- 4.1
  Background counts = 0.3
  Rate = 0.001 +/- 0.0003

[Thu Sep 29 01:25:48 2011] Off-axis axis estimate = 3.16'
[Thu Sep 29 01:26:23 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 01:26:23 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Thu Sep 29 01:26:23 2011] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.313
[Thu Sep 29 01:26:23 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.61"
[Thu Sep 29 01:26:23 2011] fullrun_ccd3_acisf10862_pi14-548_cl_pass0_src5.ximg exists
[Thu Sep 29 01:26:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10862_pi14-548_cl_pass0_src5.csv
[Thu Sep 29 01:26:23 2011] fullrun_ccd3_acisf10862_pi14-548_cl_pass0_src5_1.ximg exists
[Thu Sep 29 01:26:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10862_pi14-548_cl_pass0_src5.csv
[Thu Sep 29 01:26:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10862_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10862_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 01:26:23 2011] fullrun_ccd3_acisf10862_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu Sep 29 01:26:24 2011] fullrun_ccd3_acisf10862_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Sep 29 01:26:24 2011] Fit fullrun_ccd3_acisf10862_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Sep 29 01:26:29 2011] Spatial fit model total counts = 17.603900, observed total counts = 17.000000
[Thu Sep 29 01:26:29 2011] Offset between fit and detection position for source 10 = 0.645540 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.645540 pixels
  Position = (371.7, 517.6) = 5 28 4.53 -52 54 44.8
  Extent = 0.8 (0.6-0.9)", rotation angle = 0
  Source counts = 17.6 +/- 4.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Thu Sep 29 01:26:29 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 01:26:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 01:26:29 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 01:26:29 2011] Source does appear to be extended
[Thu Sep 29 01:26:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 01:26:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 01:26:46 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Thu Sep 29 01:26:46 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.965
[Thu Sep 29 01:26:46 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.76"
[Thu Sep 29 01:26:46 2011] fullrun_ccd3_acisf10862_pi14-548_cl_pass1_src5.ximg exists
[Thu Sep 29 01:26:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10862_pi14-548_cl_pass1_src5.csv
[Thu Sep 29 01:26:46 2011] fullrun_ccd3_acisf10862_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Sep 29 01:26:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10862_pi14-548_cl_pass1_src5.csv
[Thu Sep 29 01:26:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10862_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10862_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 01:26:46 2011] fullrun_ccd3_acisf10862_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Sep 29 01:26:46 2011] fullrun_ccd3_acisf10862_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Sep 29 01:26:46 2011] Fit fullrun_ccd3_acisf10862_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Sep 29 01:26:51 2011] Spatial fit model total counts = 16.008700, observed total counts = 17.000000
[Thu Sep 29 01:26:51 2011] Offset between fit and detection position for source 10 = 0.067016 pixels
[Thu Sep 29 01:26:51 2011] 15.997800 total counts/ 0.000000 bgd. counts: snr = 56053326245796.757812
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.067016 pixels
  Position = (371.7, 517.7) = 5 28 4.53 -52 54 44.7
  Extent = 0.8 (0.6-0.9)", rotation angle = 0
  Source counts = 16.0 +/- 4.0
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Thu Sep 29 01:26:51 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 01:26:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 01:26:51 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 01:26:51 2011] Source does appear to be extended
[Thu Sep 29 01:26:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 01:28:26 2011] Not overwriting source region fullrun_ccd3_acisf10862_pi14-548_pass1_cl_src10_src.reg
[Thu Sep 29 01:28:26 2011] Extracting stamp from image fullrun_ccd3_acisf10862_pi14-548_cl_sm2.00.img.gz, (336, 482) - (407, 553)
[Thu Sep 29 01:28:26 2011] Writing fullrun_ccd3_acisf10862_pi14-548_pass1_cl_src10.gif
[Thu Sep 29 01:28:40 2011] ../../acisf10862/products/events/fullrun_ccd3_acisf10862_pi14-548_pass1_cl_src10_src.evt and ../../acisf10862/products/events/fullrun_ccd3_acisf10862_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Thu Sep 29 01:28:40 2011] Size of ../../acisf10862/products/events/fullrun_ccd3_acisf10862_pi14-548_pass1_cl_src10_src.evt.gz[events] = 17 counts
[Thu Sep 29 01:28:40 2011] Mean chipx,y = (307.06, 809.12)
[Thu Sep 29 01:28:40 2011] Mean tdetx,y = (4322.88, 3368.06)
[Thu Sep 29 01:28:40 2011] chipx,y range = (292.00-325.00, 791.00-825.00)
[Thu Sep 29 01:28:40 2011] Size of ../../acisf10862/products/events/fullrun_ccd3_acisf10862_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 7 counts
[Thu Sep 29 01:28:40 2011] ../../acisf10862/products/images/fullrun_ccd3_acisf10862_pi14-548_pass1_cl_src10_src.img and ../../acisf10862/products/images/fullrun_ccd3_acisf10862_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Thu Sep 29 01:28:40 2011] ../../acisf10862/products/spectra/fullrun_ccd3_acisf10862_pi14-548_pass1_cl_src10_src.pi and ../../acisf10862/products/spectra/fullrun_ccd3_acisf10862_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Thu Sep 29 01:28:40 2011] Not generating rmf since there are only 15 counts
[Thu Sep 29 01:28:43 2011] ../../acisf10862/products/lightcurves/fullrun_ccd3_acisf10862_pi14-548_pass1_cl_src10_src.lc and ../../acisf10862/products/lightcurves/fullrun_ccd3_acisf10862_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Thu Sep 29 01:29:17 2011] 191.285
[Thu Sep 29 01:29:20 2011] Updating aperture counts using extracted products
[Thu Sep 29 01:29:20 2011] Error reading totcts from fullrun_ccd3_acisf10862_pi14-548_pass1_cl_src10_src.pi.gz
[Thu Sep 29 01:29:20 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 01:29:20 2011] Using photon index=1.80, rate=0.00127, arf fullrun_ccd3_acisf10862_pi14-548_pass1_cl_src10.arf
[Thu Sep 29 01:29:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 01:29:20 2011] Updating source flux to 1.6e-14
[Thu Sep 29 01:29:25 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep 29 01:29:26 2011] acisf10862/analysis//spectral/fullrun_ccd3_acisf10862_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete