[Tue Oct 18 13:30:47 2011] Detection parameters:
  Position = (501.1, 298.3) = 23 22 26.79 -2 14 41.0
  Extent = 0.5" x 0.5", rotation angle = 158 degrees
  Source counts = 25.1 +/- 5.3
  Background counts = 2.9
  Rate = 0.0004 +/- 8e-05

[Tue Oct 18 13:30:47 2011] Off-axis axis estimate = 0.88'
[Tue Oct 18 13:31:51 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 13:31:51 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Oct 18 13:31:51 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.924
[Tue Oct 18 13:31:51 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.38"
[Tue Oct 18 13:31:53 2011] fullrun_ccd7_acisf10856_pi14-548_cl_pass0_src10.ximg exists
[Tue Oct 18 13:31:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10856_pi14-548_cl_pass0_src10.csv
[Tue Oct 18 13:31:53 2011] fullrun_ccd7_acisf10856_pi14-548_cl_pass0_src10_1.ximg exists
[Tue Oct 18 13:31:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10856_pi14-548_cl_pass0_src10.csv
[Tue Oct 18 13:31:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10856_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10856_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 13:31:53 2011] fullrun_ccd7_acisf10856_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Tue Oct 18 13:31:53 2011] fullrun_ccd7_acisf10856_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Oct 18 13:31:53 2011] Fit fullrun_ccd7_acisf10856_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Oct 18 13:32:07 2011] Spatial fit model total counts = 38.999800, observed total counts = 39.000000
[Tue Oct 18 13:32:07 2011] Offset between fit and detection position for source 25 = 0.682504 pixels
[Tue Oct 18 13:32:07 2011] 39.352600 total counts/ 14.923200 bgd. counts: snr = 6.323854
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.682504 pixels
  Position = (501.6, 298.8) = 23 22 26.80 -2 14 41.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 24.4 +/- 6.3
  Background counts = 14.9
  Rate = 0.0004 +/- 0.0001
[Tue Oct 18 13:32:07 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 13:32:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 13:32:07 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 13:32:07 2011] Source does appear to be extended
[Tue Oct 18 13:32:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 13:32:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 13:32:29 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Tue Oct 18 13:32:29 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.320
[Tue Oct 18 13:32:29 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.40"
[Tue Oct 18 13:32:30 2011] fullrun_ccd7_acisf10856_pi14-548_cl_pass1_src9.ximg exists
[Tue Oct 18 13:32:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10856_pi14-548_cl_pass1_src9.csv
[Tue Oct 18 13:32:30 2011] fullrun_ccd7_acisf10856_pi14-548_cl_pass1_src9_1.ximg exists
[Tue Oct 18 13:32:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10856_pi14-548_cl_pass1_src9.csv
[Tue Oct 18 13:32:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10856_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10856_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 13:32:31 2011] fullrun_ccd7_acisf10856_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Tue Oct 18 13:32:31 2011] fullrun_ccd7_acisf10856_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Oct 18 13:32:31 2011] Fit fullrun_ccd7_acisf10856_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Oct 18 13:32:42 2011] Spatial fit model total counts = 39.999800, observed total counts = 40.000000
[Tue Oct 18 13:32:42 2011] Offset between fit and detection position for source 25 = 0.006931 pixels
[Tue Oct 18 13:32:42 2011] 39.818800 total counts/ 15.463400 bgd. counts: snr = 6.193595
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.006931 pixels
  Position = (501.6, 298.8) = 23 22 26.80 -2 14 41.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 24.4 +/- 6.3
  Background counts = 15.5
  Rate = 0.0004 +/- 0.0001
[Tue Oct 18 13:32:42 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 13:32:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 13:32:42 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 13:32:42 2011] Source does appear to be extended
[Tue Oct 18 13:32:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 13:35:07 2011] Not overwriting source region fullrun_ccd7_acisf10856_pi14-548_pass1_cl_src25_src.reg
[Tue Oct 18 13:35:07 2011] Extracting stamp from image fullrun_ccd7_acisf10856_pi14-548_cl_sm2.00.img.gz, (484, 281) - (520, 317)
[Tue Oct 18 13:35:07 2011] Writing fullrun_ccd7_acisf10856_pi14-548_pass1_cl_src25.gif
[Tue Oct 18 13:35:31 2011] ../../acisf10856/products/events/fullrun_ccd7_acisf10856_pi14-548_pass1_cl_src25_src.evt and ../../acisf10856/products/events/fullrun_ccd7_acisf10856_pi14-548_pass1_cl_src25_bgd.evt exist, delete to re-create
[Tue Oct 18 13:35:31 2011] Size of ../../acisf10856/products/events/fullrun_ccd7_acisf10856_pi14-548_pass1_cl_src25_src.evt.gz[events] = 26 counts
[Tue Oct 18 13:35:31 2011] Mean chipx,y = (87.38, 508.00)
[Tue Oct 18 13:35:31 2011] Mean tdetx,y = (4004.38, 2210.00)
[Tue Oct 18 13:35:31 2011] chipx,y range = (69.00-102.00, 490.00-523.00)
[Tue Oct 18 13:35:31 2011] Size of ../../acisf10856/products/events/fullrun_ccd7_acisf10856_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 24 counts
[Tue Oct 18 13:35:31 2011] ../../acisf10856/products/images/fullrun_ccd7_acisf10856_pi14-548_pass1_cl_src25_src.img and ../../acisf10856/products/images/fullrun_ccd7_acisf10856_pi14-548_pass1_cl_src25_bgd.img exist, delete to re-create
[Tue Oct 18 13:35:31 2011] ../../acisf10856/products/spectra/fullrun_ccd7_acisf10856_pi14-548_pass1_cl_src25_src.pi and ../../acisf10856/products/spectra/fullrun_ccd7_acisf10856_pi14-548_pass1_cl_src25_bgd.pi exist, delete to re-create
[Tue Oct 18 13:35:31 2011] Not generating rmf since there are only 24 counts
[Tue Oct 18 13:35:35 2011] ../../acisf10856/products/lightcurves/fullrun_ccd7_acisf10856_pi14-548_pass1_cl_src25_src.lc and ../../acisf10856/products/lightcurves/fullrun_ccd7_acisf10856_pi14-548_pass1_cl_src25_bgd.lc exist, delete to re-create
[Tue Oct 18 13:36:20 2011] 233.158
[Tue Oct 18 13:36:25 2011] Updating aperture counts using extracted products
[Tue Oct 18 13:36:25 2011] Error reading totcts from fullrun_ccd7_acisf10856_pi14-548_pass1_cl_src25_src.pi.gz
[Tue Oct 18 13:36:25 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 13:36:25 2011] Using photon index=1.80, rate=0.000377, arf fullrun_ccd7_acisf10856_pi14-548_pass1_cl_src25.arf
[Tue Oct 18 13:36:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 13:36:25 2011] Updating source flux to 2.8e-15
[Tue Oct 18 13:36:56 2011] Source 25 has fewer than 100.000000 counts, skipping spectral fitting