[Tue Oct 18 13:30:46 2011] Detection parameters:
  Position = (892.7, 648.0) = 23 22 13.94 -2 11 48.9
  Extent = 0.6" x 0.5", rotation angle = 6 degrees
  Source counts = 236.4 +/- 15.7
  Background counts = 10.6
  Rate = 0.004 +/- 0.0002

[Tue Oct 18 13:30:47 2011] Off-axis axis estimate = 3.56'
[Tue Oct 18 13:31:51 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 13:31:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 13:31:51 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Tue Oct 18 13:31:51 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.063
[Tue Oct 18 13:31:51 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.71"
[Tue Oct 18 13:31:52 2011] fullrun_ccd7_acisf10856_pi14-548_cl_pass0_src2.ximg exists
[Tue Oct 18 13:31:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10856_pi14-548_cl_pass0_src2.csv
[Tue Oct 18 13:31:52 2011] fullrun_ccd7_acisf10856_pi14-548_cl_pass0_src2_1.ximg exists
[Tue Oct 18 13:31:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10856_pi14-548_cl_pass0_src2.csv
[Tue Oct 18 13:31:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10856_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10856_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 13:31:53 2011] fullrun_ccd7_acisf10856_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Tue Oct 18 13:31:53 2011] fullrun_ccd7_acisf10856_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Oct 18 13:31:53 2011] Fit fullrun_ccd7_acisf10856_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Oct 18 13:32:07 2011] Spatial fit model total counts = 248.929000, observed total counts = 252.000000
[Tue Oct 18 13:32:07 2011] Offset between fit and detection position for source 1 = 7.720470 pixels
[Tue Oct 18 13:32:07 2011] 265.523034 total counts/ 265.523000 bgd. counts: snr = 0.000002
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 7.720470 pixels
  Position = (898.8, 643.2) = 23 22 13.76 -2 11 51.5
  Extent = 1.5 (0.2-2.8)", rotation angle = 0
  Source counts = 0.0 +/- 16.3
  Background counts = 265.5
  Rate = 5e-10 +/- 0.0003
  Deleting source due to low Poisson probability