[Tue Oct 18 13:30:44 2011] Detection parameters:
  Position = (947.6, 1114.7) = 23 22 25.92 -2 15 46.3
  Extent = 0.6" x 0.5", rotation angle = 97 degrees
  Source counts = 18.5 +/- 4.5
  Background counts = 1.5
  Rate = 0.0003 +/- 7e-05

[Tue Oct 18 13:30:45 2011] Off-axis axis estimate = 1.92'
[Tue Oct 18 13:31:50 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 13:31:50 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Tue Oct 18 13:31:50 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.219
[Tue Oct 18 13:31:50 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.42"
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src15.ximg exists
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src15_1.ximg exists
[Tue Oct 18 13:31:51 2011] Fit fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src15 appears to have run properly
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Oct 18 13:31:51 2011] Fit fullrun_ccd6_acisf10856_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Oct 18 13:32:04 2011] Spatial fit model total counts = 23.997000, observed total counts = 25.000000
[Tue Oct 18 13:32:04 2011] Offset between fit and detection position for source 9 = 1.088189 pixels
[Tue Oct 18 13:32:04 2011] 23.424670 total counts/ 6.365570 bgd. counts: snr = 6.761413
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.088189 pixels
  Position = (948.1, 1115.7) = 23 22 25.92 -2 15 46.0
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 17.1 +/- 4.8
  Background counts = 6.4
  Rate = 0.0003 +/- 7e-05
[Tue Oct 18 13:32:04 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 13:32:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 13:32:04 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 13:32:04 2011] Source does appear to be extended
[Tue Oct 18 13:32:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 13:32:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 13:32:28 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Tue Oct 18 13:32:28 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.860
[Tue Oct 18 13:32:28 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.40"
[Tue Oct 18 13:32:29 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src15.ximg exists
[Tue Oct 18 13:32:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src15.csv
[Tue Oct 18 13:32:29 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src15_1.ximg exists
[Tue Oct 18 13:32:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src15.csv
[Tue Oct 18 13:32:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 13:32:29 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Tue Oct 18 13:32:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass1_tfrozen_src15.csv
[Tue Oct 18 13:32:29 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Oct 18 13:32:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass1_tfrozen_src15.csv
[Tue Oct 18 13:32:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10856_pi14-548_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10856_pi14-548_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 13:32:40 2011] Spatial fit model total counts = 23.128000, observed total counts = 26.000000
[Tue Oct 18 13:32:40 2011] Offset between fit and detection position for source 9 = 0.006591 pixels
[Tue Oct 18 13:32:40 2011] 22.322860 total counts/ 5.378260 bgd. counts: snr = 7.306517
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.006591 pixels
  Position = (948.1, 1115.7) = 23 22 25.92 -2 15 46.0
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 16.9 +/- 4.7
  Background counts = 5.4
  Rate = 0.0003 +/- 7e-05
[Tue Oct 18 13:32:40 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 13:32:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 13:32:40 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 13:32:40 2011] Source does appear to be extended
[Tue Oct 18 13:32:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 13:34:07 2011] Not overwriting source region fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src9_src.reg
[Tue Oct 18 13:34:07 2011] Extracting stamp from image fullrun_ccd6_acisf10856_pi14-548_cl_sm2.00.img.gz, (930, 1097) - (967, 1134)
[Tue Oct 18 13:34:07 2011] Writing fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src9.gif
[Tue Oct 18 13:34:47 2011] ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src9_src.evt and ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Tue Oct 18 13:34:47 2011] Size of ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src9_src.evt.gz[events] = 18 counts
[Tue Oct 18 13:34:47 2011] Mean chipx,y = (1011.61, 587.50)
[Tue Oct 18 13:34:47 2011] Mean tdetx,y = (3886.61, 2289.50)
[Tue Oct 18 13:34:47 2011] chipx,y range = (1001.00-1022.00, 570.00-600.00)
[Tue Oct 18 13:34:47 2011] Size of ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 6 counts
[Tue Oct 18 13:34:47 2011] ../../acisf10856/products/images/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src9_src.img and ../../acisf10856/products/images/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Tue Oct 18 13:34:47 2011] ../../acisf10856/products/spectra/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src9_src.pi and ../../acisf10856/products/spectra/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Tue Oct 18 13:34:47 2011] Not generating rmf since there are only 16 counts
[Tue Oct 18 13:34:50 2011] ../../acisf10856/products/lightcurves/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src9_src.lc and ../../acisf10856/products/lightcurves/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Tue Oct 18 13:35:07 2011] 227.573
[Tue Oct 18 13:36:24 2011] Updating aperture counts using extracted products
[Tue Oct 18 13:36:24 2011] Error reading totcts from fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src9_src.pi.gz
[Tue Oct 18 13:36:25 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 13:36:25 2011] Using photon index=1.80, rate=0.000262, arf fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src9.arf
[Tue Oct 18 13:36:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 13:36:25 2011] Updating source flux to 2e-15
[Tue Oct 18 13:36:49 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting