[Tue Oct 18 13:30:44 2011] Detection parameters:
  Position = (928.4, 1087.1) = 23 22 26.56 -2 15 59.8
  Extent = 0.6" x 0.5", rotation angle = 72 degrees
  Source counts = 28.0 +/- 5.5
  Background counts = 2.0
  Rate = 0.0004 +/- 8e-05

[Tue Oct 18 13:30:45 2011] Off-axis axis estimate = 2.16'
[Tue Oct 18 13:31:50 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 13:31:50 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Tue Oct 18 13:31:50 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.133
[Tue Oct 18 13:31:50 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.45"
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src12.ximg exists
[Tue Oct 18 13:31:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src12.csv
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src12_1.ximg exists
[Tue Oct 18 13:31:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src12.csv
[Tue Oct 18 13:31:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Oct 18 13:31:51 2011] Fit fullrun_ccd6_acisf10856_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Oct 18 13:32:04 2011] Spatial fit model total counts = 31.562200, observed total counts = 32.000000
[Tue Oct 18 13:32:04 2011] Offset between fit and detection position for source 8 = 0.590605 pixels
[Tue Oct 18 13:32:04 2011] 31.504420 total counts/ 3.783220 bgd. counts: snr = 14.252178
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.590605 pixels
  Position = (928.8, 1087.5) = 23 22 26.56 -2 15 59.9
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 27.7 +/- 5.6
  Background counts = 3.8
  Rate = 0.0004 +/- 9e-05
[Tue Oct 18 13:32:04 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 13:32:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 13:32:04 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 13:32:04 2011] Source does appear to be extended
[Tue Oct 18 13:32:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 13:32:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 13:32:28 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Tue Oct 18 13:32:28 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.012
[Tue Oct 18 13:32:28 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.60"
[Tue Oct 18 13:32:29 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src12.ximg exists
[Tue Oct 18 13:32:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src12.csv
[Tue Oct 18 13:32:29 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src12_1.ximg exists
[Tue Oct 18 13:32:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src12.csv
[Tue Oct 18 13:32:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 13:32:29 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Tue Oct 18 13:32:29 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Oct 18 13:32:29 2011] Fit fullrun_ccd6_acisf10856_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Oct 18 13:32:40 2011] Spatial fit model total counts = 32.051400, observed total counts = 32.000000
[Tue Oct 18 13:32:40 2011] Offset between fit and detection position for source 8 = 0.003731 pixels
[Tue Oct 18 13:32:40 2011] 31.897260 total counts/ 3.704060 bgd. counts: snr = 14.648912
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.003731 pixels
  Position = (928.8, 1087.5) = 23 22 26.56 -2 15 59.9
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 28.2 +/- 5.6
  Background counts = 3.7
  Rate = 0.0004 +/- 9e-05
[Tue Oct 18 13:32:40 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 13:32:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 13:32:40 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 13:32:40 2011] Source does appear to be extended
[Tue Oct 18 13:32:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 13:34:07 2011] Not overwriting source region fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src8_src.reg
[Tue Oct 18 13:34:07 2011] Extracting stamp from image fullrun_ccd6_acisf10856_pi14-548_cl_sm2.00.img.gz, (901, 1060) - (956, 1115)
[Tue Oct 18 13:34:07 2011] Writing fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src8.gif
[Tue Oct 18 13:34:39 2011] ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src8_src.evt and ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Tue Oct 18 13:34:39 2011] Size of ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src8_src.evt.gz[events] = 29 counts
[Tue Oct 18 13:34:39 2011] Mean chipx,y = (984.69, 579.55)
[Tue Oct 18 13:34:39 2011] Mean tdetx,y = (3859.69, 2281.55)
[Tue Oct 18 13:34:39 2011] chipx,y range = (969.00-1001.00, 563.00-595.00)
[Tue Oct 18 13:34:39 2011] Size of ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 12 counts
[Tue Oct 18 13:34:39 2011] ../../acisf10856/products/images/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src8_src.img and ../../acisf10856/products/images/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Tue Oct 18 13:34:39 2011] ../../acisf10856/products/spectra/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src8_src.pi and ../../acisf10856/products/spectra/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Tue Oct 18 13:34:39 2011] Not generating rmf since there are only 28 counts
[Tue Oct 18 13:34:42 2011] ../../acisf10856/products/lightcurves/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src8_src.lc and ../../acisf10856/products/lightcurves/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Tue Oct 18 13:35:07 2011] 205.041
[Tue Oct 18 13:36:24 2011] Updating aperture counts using extracted products
[Tue Oct 18 13:36:24 2011] Error reading totcts from fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src8_src.pi.gz
[Tue Oct 18 13:36:25 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 13:36:25 2011] Using photon index=1.80, rate=0.000437, arf fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src8.arf
[Tue Oct 18 13:36:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 13:36:25 2011] Updating source flux to 4.7e-15
[Tue Oct 18 13:36:49 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting