[Tue Oct 18 13:30:45 2011] Detection parameters:
  Position = (471.4, 432.5) = 23 22 41.56 -2 21 21.9
  Extent = 2.7" x 2.2", rotation angle = 114 degrees
  Source counts = 426.5 +/- 22.7
  Background counts = 89.5
  Rate = 0.007 +/- 0.0004

[Tue Oct 18 13:30:45 2011] Off-axis axis estimate = 8.50'
[Tue Oct 18 13:31:50 2011] Using EEF radius (= 3.19 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 13:31:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 13:31:50 2011] Initial guess for spatial extent in simple fitting = 3.19"
[Tue Oct 18 13:31:50 2011] source mask rpix=6.5, npix_max = 195, mask sum = 196, frac = 1.003
[Tue Oct 18 13:31:50 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.19"
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct 18 13:31:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct 18 13:31:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 13:31:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct 18 13:31:51 2011] Fit fullrun_ccd6_acisf10856_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct 18 13:32:04 2011] Spatial fit model total counts = 522.289000, observed total counts = 522.000000
[Tue Oct 18 13:32:04 2011] Offset between fit and detection position for source 27 = 1.213069 pixels
[Tue Oct 18 13:32:04 2011] 521.861500 total counts/ 49.243500 bgd. counts: snr = 67.349721
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 1.213069 pixels
  Position = (472.4, 433.2) = 23 22 41.54 -2 21 21.8
  Extent = 4.3 (4.0-4.7)", rotation angle = 0
  Source counts = 472.6 +/- 22.8
  Background counts = 49.2
  Rate = 0.007 +/- 0.0004
[Tue Oct 18 13:32:04 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 13:32:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 13:32:04 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 13:32:04 2011] Source does appear to be extended
[Tue Oct 18 13:32:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 13:32:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 13:32:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 13:32:28 2011] Initial guess for spatial extent in simple fitting = 4.31"
[Tue Oct 18 13:32:28 2011] source mask rpix=8.8, npix_max = 343, mask sum = 342, frac = 0.996
[Tue Oct 18 13:32:28 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.31"
[Tue Oct 18 13:32:28 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct 18 13:32:28 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 13:32:28 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct 18 13:32:28 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 13:32:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 13:32:29 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct 18 13:32:29 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct 18 13:32:29 2011] Fit fullrun_ccd6_acisf10856_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct 18 13:32:40 2011] Spatial fit model total counts = 571.921000, observed total counts = 572.000000
[Tue Oct 18 13:32:40 2011] Offset between fit and detection position for source 27 = 0.286818 pixels
[Tue Oct 18 13:32:40 2011] 571.828000 total counts/ 108.648000 bgd. counts: snr = 44.436406
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.286818 pixels
  Position = (472.1, 433.2) = 23 22 41.55 -2 21 21.8
  Extent = 4.2 (3.9-4.5)", rotation angle = 0
  Source counts = 463.2 +/- 23.9
  Background counts = 108.6
  Rate = 0.007 +/- 0.0004
[Tue Oct 18 13:32:40 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 13:32:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 13:32:40 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 13:32:40 2011] Source does appear to be extended
[Tue Oct 18 13:32:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 13:34:07 2011] Not overwriting source region fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27_src.reg
[Tue Oct 18 13:34:07 2011] Extracting stamp from image fullrun_ccd6_acisf10856_pi14-548_cl_sm2.00.img.gz, (280, 241) - (665, 626)
[Tue Oct 18 13:34:07 2011] Writing fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27.gif
[Tue Oct 18 13:34:08 2011] ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27_src.evt and ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27_bgd.evt exist, delete to re-create
[Tue Oct 18 13:34:08 2011] Size of ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27_src.evt.gz[events] = 547 counts
[Tue Oct 18 13:34:08 2011] Mean chipx,y = (200.22, 429.36)
[Tue Oct 18 13:34:08 2011] Mean tdetx,y = (3075.22, 2131.36)
[Tue Oct 18 13:34:08 2011] chipx,y range = (157.00-246.00, 387.00-477.00)
[Tue Oct 18 13:34:08 2011] Size of ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 952 counts
[Tue Oct 18 13:34:08 2011] ../../acisf10856/products/images/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27_src.img and ../../acisf10856/products/images/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27_bgd.img exist, delete to re-create
[Tue Oct 18 13:34:08 2011] ../../acisf10856/products/spectra/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27_src.pi and ../../acisf10856/products/spectra/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27_bgd.pi exist, delete to re-create
[Tue Oct 18 13:34:11 2011] ../../acisf10856/products/lightcurves/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27_src.lc and ../../acisf10856/products/lightcurves/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27_bgd.lc exist, delete to re-create
[Tue Oct 18 13:35:06 2011] Keeping rmf generated by specextract
[Tue Oct 18 13:35:06 2011] 178.593
[Tue Oct 18 13:36:24 2011] Updating aperture counts using extracted products
[Tue Oct 18 13:36:24 2011] Error reading totcts from fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27_src.pi.gz
[Tue Oct 18 13:36:25 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 13:36:25 2011] Using photon index=1.80, rate=0.00717, arf fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27.arf
[Tue Oct 18 13:36:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 13:36:25 2011] Updating source flux to 8.4e-14
[Tue Oct 18 13:36:56 2011] Reading fit data from acisf10856/analysis//spectral/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27_pl.csv
[Tue Oct 18 13:36:56 2011] Spectral fit parameter nH value = 2.11978e+21
[Tue Oct 18 13:36:56 2011] Spectral fit parameter PhoIndex value = 3.44146
[Tue Oct 18 13:36:56 2011] Failed to get F(0.3-8.0) from acisf10856/analysis//spectral/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27_pl.csv, possibly due to different flux energy range selected
[Tue Oct 18 13:36:56 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 13:36:56 2011] Using Nh = 2.1e+21, photon index=3.44, rate=0.00717, arf fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src27.arf
[Tue Oct 18 13:36:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 13:36:56 2011] Updating source flux to 6e-14