[Tue Oct 18 13:30:45 2011] Detection parameters:
  Position = (636.3, 1172.9) = 23 22 36.14 -2 15 17.6
  Extent = 0.5" x 0.5", rotation angle = 77 degrees
  Source counts = 29.8 +/- 5.7
  Background counts = 2.2
  Rate = 0.0005 +/- 9e-05

[Tue Oct 18 13:30:45 2011] Off-axis axis estimate = 2.99'
[Tue Oct 18 13:31:50 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 13:31:50 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Tue Oct 18 13:31:50 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.068
[Tue Oct 18 13:31:50 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.58"
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src10.ximg exists
[Tue Oct 18 13:31:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src10.csv
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src10_1.ximg exists
[Tue Oct 18 13:31:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src10.csv
[Tue Oct 18 13:31:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10856_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Tue Oct 18 13:31:51 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Oct 18 13:31:51 2011] Fit fullrun_ccd6_acisf10856_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Oct 18 13:32:04 2011] Spatial fit model total counts = 38.381700, observed total counts = 39.000000
[Tue Oct 18 13:32:04 2011] Offset between fit and detection position for source 12 = 0.211419 pixels
[Tue Oct 18 13:32:04 2011] 38.171000 total counts/ 2.313600 bgd. counts: snr = 23.574075
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.211419 pixels
  Position = (636.5, 1173.0) = 23 22 36.15 -2 15 17.8
  Extent = 1.2 (0.7-1.5)", rotation angle = 0
  Source counts = 35.9 +/- 6.2
  Background counts = 2.3
  Rate = 0.0006 +/- 0.0001
[Tue Oct 18 13:32:04 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 13:32:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 13:32:04 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 13:32:04 2011] Source does appear to be extended
[Tue Oct 18 13:32:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 13:32:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 13:32:28 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Tue Oct 18 13:32:28 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.906
[Tue Oct 18 13:32:28 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 1.17"
[Tue Oct 18 13:32:29 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src10.ximg exists
[Tue Oct 18 13:32:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src10.csv
[Tue Oct 18 13:32:29 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src10_1.ximg exists
[Tue Oct 18 13:32:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src10.csv
[Tue Oct 18 13:32:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10856_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 13:32:29 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue Oct 18 13:32:29 2011] fullrun_ccd6_acisf10856_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Oct 18 13:32:29 2011] Fit fullrun_ccd6_acisf10856_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Oct 18 13:32:40 2011] Spatial fit model total counts = 38.338800, observed total counts = 39.000000
[Tue Oct 18 13:32:40 2011] Offset between fit and detection position for source 12 = 0.251268 pixels
[Tue Oct 18 13:32:40 2011] 38.064730 total counts/ 1.036830 bgd. counts: snr = 36.364306
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.251268 pixels
  Position = (636.4, 1173.3) = 23 22 36.16 -2 15 17.7
  Extent = 1.2 (0.9-1.4)", rotation angle = 0
  Source counts = 37.0 +/- 6.2
  Background counts = 1.0
  Rate = 0.0006 +/- 0.0001
[Tue Oct 18 13:32:40 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 13:32:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 13:32:40 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 13:32:40 2011] Source does appear to be extended
[Tue Oct 18 13:32:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 13:34:07 2011] Not overwriting source region fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src12_src.reg
[Tue Oct 18 13:34:07 2011] Extracting stamp from image fullrun_ccd6_acisf10856_pi14-548_cl_sm2.00.img.gz, (581, 1117) - (692, 1229)
[Tue Oct 18 13:34:07 2011] Writing fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src12.gif
[Tue Oct 18 13:34:33 2011] ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src12_src.evt and ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Tue Oct 18 13:34:33 2011] Size of ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src12_src.evt.gz[events] = 41 counts
[Tue Oct 18 13:34:33 2011] Mean chipx,y = (943.83, 278.34)
[Tue Oct 18 13:34:33 2011] Mean tdetx,y = (3818.83, 1980.34)
[Tue Oct 18 13:34:33 2011] chipx,y range = (924.00-963.00, 259.00-295.00)
[Tue Oct 18 13:34:34 2011] Size of ../../acisf10856/products/events/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 72 counts
[Tue Oct 18 13:34:34 2011] ../../acisf10856/products/images/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src12_src.img and ../../acisf10856/products/images/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Tue Oct 18 13:34:34 2011] ../../acisf10856/products/spectra/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src12_src.pi and ../../acisf10856/products/spectra/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Tue Oct 18 13:34:34 2011] Not generating rmf since there are only 37 counts
[Tue Oct 18 13:34:36 2011] ../../acisf10856/products/lightcurves/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src12_src.lc and ../../acisf10856/products/lightcurves/fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Tue Oct 18 13:35:06 2011] 208.445
[Tue Oct 18 13:36:24 2011] Updating aperture counts using extracted products
[Tue Oct 18 13:36:24 2011] Error reading totcts from fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src12_src.pi.gz
[Tue Oct 18 13:36:25 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 13:36:25 2011] Using photon index=1.80, rate=0.000573, arf fullrun_ccd6_acisf10856_pi14-548_pass1_cl_src12.arf
[Tue Oct 18 13:36:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 13:36:25 2011] Updating source flux to 6e-15
[Tue Oct 18 13:36:49 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting