[Tue Oct 18 13:30:42 2011] Detection parameters:
  Position = (552.9, 1182.7) = 23 21 55.62 -2 18 22.7
  Extent = 1.2" x 1.0", rotation angle = 129 degrees
  Source counts = 162.1 +/- 14.5
  Background counts = 48.9
  Rate = 0.003 +/- 0.0002

[Tue Oct 18 13:30:42 2011] Off-axis axis estimate = 8.76'
[Tue Oct 18 13:31:48 2011] Using EEF radius (= 3.39 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 13:31:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 13:31:48 2011] Initial guess for spatial extent in simple fitting = 3.39"
[Tue Oct 18 13:31:48 2011] source mask rpix=6.9, npix_max = 218, mask sum = 209, frac = 0.955
[Tue Oct 18 13:31:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.39"
[Tue Oct 18 13:31:48 2011] fullrun_ccd2_acisf10856_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct 18 13:31:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10856_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 13:31:48 2011] fullrun_ccd2_acisf10856_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct 18 13:31:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10856_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 13:31:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10856_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10856_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 13:31:48 2011] fullrun_ccd2_acisf10856_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct 18 13:31:48 2011] fullrun_ccd2_acisf10856_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct 18 13:31:48 2011] Fit fullrun_ccd2_acisf10856_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct 18 13:32:00 2011] Spatial fit model total counts = 283.123000, observed total counts = 285.000000
[Tue Oct 18 13:32:00 2011] Offset between fit and detection position for source 4 = 1.523239 pixels
[Tue Oct 18 13:32:00 2011] 282.671000 total counts/ 109.049000 bgd. counts: snr = 16.626235
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.523239 pixels
  Position = (554.2, 1181.9) = 23 21 55.59 -2 18 23.3
  Extent = 3.1 (2.7-3.6)", rotation angle = 0
  Source counts = 173.6 +/- 16.8
  Background counts = 109.0
  Rate = 0.003 +/- 0.0003
[Tue Oct 18 13:32:00 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 13:32:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 13:32:00 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 13:32:00 2011] Source does appear to be extended
[Tue Oct 18 13:32:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 13:32:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 13:32:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 13:32:25 2011] Initial guess for spatial extent in simple fitting = 3.13"
[Tue Oct 18 13:32:25 2011] source mask rpix=6.4, npix_max = 188, mask sum = 193, frac = 1.024
[Tue Oct 18 13:32:25 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.13"
[Tue Oct 18 13:32:26 2011] fullrun_ccd2_acisf10856_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct 18 13:32:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10856_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 13:32:26 2011] fullrun_ccd2_acisf10856_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct 18 13:32:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10856_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 13:32:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10856_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10856_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 13:32:26 2011] fullrun_ccd2_acisf10856_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct 18 13:32:26 2011] fullrun_ccd2_acisf10856_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct 18 13:32:26 2011] Fit fullrun_ccd2_acisf10856_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct 18 13:32:35 2011] Spatial fit model total counts = 273.697000, observed total counts = 276.000000
[Tue Oct 18 13:32:35 2011] Offset between fit and detection position for source 4 = 0.093853 pixels
[Tue Oct 18 13:32:35 2011] 273.344000 total counts/ 104.693000 bgd. counts: snr = 16.482766
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.093853 pixels
  Position = (554.3, 1181.8) = 23 21 55.59 -2 18 23.4
  Extent = 3.1 (2.6-3.5)", rotation angle = 0
  Source counts = 168.7 +/- 16.5
  Background counts = 104.7
  Rate = 0.003 +/- 0.0003
[Tue Oct 18 13:32:35 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 13:32:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 13:32:35 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 13:32:35 2011] Source does appear to be extended
[Tue Oct 18 13:32:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 13:32:59 2011] Not overwriting source region fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4_src.reg
[Tue Oct 18 13:32:59 2011] Extracting stamp from image fullrun_ccd2_acisf10856_pi14-548_cl_sm2.00.img.gz, (413, 1041) - (695, 1323)
[Tue Oct 18 13:32:59 2011] Writing fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4.gif
[Tue Oct 18 13:33:00 2011] ../../acisf10856/products/events/fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4_src.evt and ../../acisf10856/products/events/fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue Oct 18 13:33:00 2011] Size of ../../acisf10856/products/events/fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4_src.evt.gz[events] = 254 counts
[Tue Oct 18 13:33:00 2011] Mean chipx,y = (825.17, 915.29)
[Tue Oct 18 13:33:00 2011] Mean tdetx,y = (3976.29, 3260.83)
[Tue Oct 18 13:33:00 2011] chipx,y range = (788.00-860.00, 881.00-947.00)
[Tue Oct 18 13:33:01 2011] Size of ../../acisf10856/products/events/fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 525 counts
[Tue Oct 18 13:33:01 2011] ../../acisf10856/products/images/fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4_src.img and ../../acisf10856/products/images/fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue Oct 18 13:33:01 2011] ../../acisf10856/products/spectra/fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4_src.pi and ../../acisf10856/products/spectra/fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue Oct 18 13:33:03 2011] ../../acisf10856/products/lightcurves/fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4_src.lc and ../../acisf10856/products/lightcurves/fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue Oct 18 13:33:27 2011] Keeping rmf generated by specextract
[Tue Oct 18 13:33:27 2011] 167.734
[Tue Oct 18 13:36:24 2011] Updating aperture counts using extracted products
[Tue Oct 18 13:36:24 2011] Error reading totcts from fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4_src.pi.gz
[Tue Oct 18 13:36:24 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 13:36:24 2011] Using photon index=1.80, rate=0.00261, arf fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4.arf
[Tue Oct 18 13:36:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 13:36:24 2011] Updating source flux to 3.5e-14
[Tue Oct 18 13:36:34 2011] Reading fit data from acisf10856/analysis//spectral/fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4_pl.csv
[Tue Oct 18 13:36:34 2011] Spectral fit parameter nH value = 1.03945e+21
[Tue Oct 18 13:36:34 2011] Spectral fit parameter PhoIndex value = 1.96637
[Tue Oct 18 13:36:34 2011] Failed to get F(0.3-8.0) from acisf10856/analysis//spectral/fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Tue Oct 18 13:36:34 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 13:36:34 2011] Using Nh = 1e+21, photon index=1.97, rate=0.00261, arf fullrun_ccd2_acisf10856_pi14-548_pass1_cl_src4.arf
[Tue Oct 18 13:36:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 13:36:34 2011] Updating source flux to 3.2e-14