[Fri Oct 14 21:30:56 2011] Detection parameters:
  Position = (697.9, 1054.0) = 14 17 35.33 52 38 51.5
  Extent = 1.2" x 0.7", rotation angle = 109 degrees
  Source counts = 114.4 +/- 10.8
  Background counts = 2.6
  Rate = 0.006 +/- 0.0006

[Fri Oct 14 21:30:58 2011] Off-axis axis estimate = 5.39'
[Fri Oct 14 21:31:37 2011] Using EEF radius (= 1.35 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 21:31:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 21:31:37 2011] Initial guess for spatial extent in simple fitting = 1.35"
[Fri Oct 14 21:31:37 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.860
[Fri Oct 14 21:31:37 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.35"
[Fri Oct 14 21:31:37 2011] fullrun_ccd3_acisf10847_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 14 21:31:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10847_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 21:31:37 2011] fullrun_ccd3_acisf10847_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 14 21:31:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10847_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 21:31:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10847_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10847_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 21:31:38 2011] fullrun_ccd3_acisf10847_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 14 21:31:38 2011] fullrun_ccd3_acisf10847_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 14 21:31:38 2011] Fit fullrun_ccd3_acisf10847_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 14 21:31:44 2011] Spatial fit model total counts = 118.565000, observed total counts = 120.000000
[Fri Oct 14 21:31:44 2011] Offset between fit and detection position for source 1 = 0.669603 pixels
[Fri Oct 14 21:31:44 2011] 118.765030 total counts/ 6.366030 bgd. counts: snr = 44.547989
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.669603 pixels
  Position = (698.4, 1054.3) = 14 17 35.33 52 38 51.4
  Extent = 1.3 (1.1-1.4)", rotation angle = 0
  Source counts = 112.4 +/- 10.9
  Background counts = 6.4
  Rate = 0.006 +/- 0.0006
[Fri Oct 14 21:31:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 21:31:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 21:31:44 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 21:31:44 2011] Source does appear to be extended
[Fri Oct 14 21:31:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 21:32:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 21:32:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 21:32:02 2011] Initial guess for spatial extent in simple fitting = 1.26"
[Fri Oct 14 21:32:02 2011] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.115
[Fri Oct 14 21:32:02 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.26"
[Fri Oct 14 21:32:03 2011] fullrun_ccd3_acisf10847_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 14 21:32:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10847_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 21:32:03 2011] fullrun_ccd3_acisf10847_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 14 21:32:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10847_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 21:32:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10847_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10847_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 21:32:03 2011] fullrun_ccd3_acisf10847_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 14 21:32:03 2011] fullrun_ccd3_acisf10847_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 14 21:32:03 2011] Fit fullrun_ccd3_acisf10847_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 14 21:32:09 2011] Spatial fit model total counts = 118.556000, observed total counts = 118.000000
[Fri Oct 14 21:32:09 2011] Offset between fit and detection position for source 1 = 0.060853 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.060853 pixels
  Position = (698.5, 1054.2) = 14 17 35.33 52 38 51.4
  Extent = 1.3 (1.1-1.4)", rotation angle = 0
  Source counts = 118.6 +/- 10.9
  Background counts = 0.0
  Rate = 0.006 +/- 0.0006
[Fri Oct 14 21:32:09 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 21:32:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 21:32:09 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 21:32:09 2011] Source does appear to be extended
[Fri Oct 14 21:32:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 21:34:16 2011] Not overwriting source region fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 14 21:34:16 2011] Extracting stamp from image fullrun_ccd3_acisf10847_pi14-548_cl_sm2.00.img.gz, (640, 995) - (757, 1113)
[Fri Oct 14 21:34:16 2011] Writing fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1.gif
[Fri Oct 14 21:34:18 2011] ../../acisf10847/products/events/fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1_src.evt and ../../acisf10847/products/events/fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 14 21:34:18 2011] Size of ../../acisf10847/products/events/fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1_src.evt.gz[events] = 117 counts
[Fri Oct 14 21:34:18 2011] Mean chipx,y = (327.70, 807.36)
[Fri Oct 14 21:34:18 2011] Mean tdetx,y = (4324.64, 3388.70)
[Fri Oct 14 21:34:18 2011] chipx,y range = (308.00-347.00, 789.00-833.00)
[Fri Oct 14 21:34:18 2011] Size of ../../acisf10847/products/events/fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 30 counts
[Fri Oct 14 21:34:18 2011] ../../acisf10847/products/images/fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1_src.img and ../../acisf10847/products/images/fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 14 21:34:18 2011] ../../acisf10847/products/spectra/fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1_src.pi and ../../acisf10847/products/spectra/fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 14 21:34:22 2011] ../../acisf10847/products/lightcurves/fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1_src.lc and ../../acisf10847/products/lightcurves/fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 14 21:35:47 2011] Keeping rmf generated by specextract
[Fri Oct 14 21:35:47 2011] 179.39
[Fri Oct 14 21:35:53 2011] Updating aperture counts using extracted products
[Fri Oct 14 21:35:53 2011] Error reading totcts from fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 14 21:35:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 21:35:54 2011] Using photon index=1.80, rate=0.00616, arf fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1.arf
[Fri Oct 14 21:35:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 21:35:54 2011] Updating source flux to 8.2e-14
[Fri Oct 14 21:36:04 2011] Reading fit data from acisf10847/analysis//spectral/fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 14 21:36:04 2011] Spectral fit parameter nH value = 8.82577e+12
[Fri Oct 14 21:36:04 2011] Spectral fit parameter PhoIndex value = 1.50136
[Fri Oct 14 21:36:04 2011] Failed to get F(0.3-8.0) from acisf10847/analysis//spectral/fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 14 21:36:04 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 21:36:04 2011] Using Nh = 8.8e+12, photon index=1.50, rate=0.00616, arf fullrun_ccd3_acisf10847_pi14-548_pass1_cl_src1.arf
[Fri Oct 14 21:36:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 21:36:04 2011] Updating source flux to 8.8e-14