[Fri Oct 14 21:30:54 2011] Detection parameters:
  Position = (1216.6, 634.5) = 14 17 37.30 52 42 37.2
  Extent = 1.2" x 1.0", rotation angle = 37 degrees
  Source counts = 48.0 +/- 7.2
  Background counts = 4.0
  Rate = 0.002 +/- 0.0004

[Fri Oct 14 21:30:56 2011] Off-axis axis estimate = 7.08'
[Fri Oct 14 21:31:36 2011] Using EEF radius (= 2.23 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 21:31:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 21:31:36 2011] Initial guess for spatial extent in simple fitting = 2.23"
[Fri Oct 14 21:31:36 2011] source mask rpix=4.5, npix_max = 100, mask sum = 100, frac = 0.991
[Fri Oct 14 21:31:36 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.23"
[Fri Oct 14 21:31:36 2011] fullrun_ccd2_acisf10847_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 14 21:31:36 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10847_pi14-548_cl_pass0_src3.csv
[Fri Oct 14 21:31:36 2011] fullrun_ccd2_acisf10847_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 14 21:31:36 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10847_pi14-548_cl_pass0_src3.csv
[Fri Oct 14 21:31:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10847_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10847_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 21:31:36 2011] fullrun_ccd2_acisf10847_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 14 21:31:36 2011] fullrun_ccd2_acisf10847_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 14 21:31:36 2011] Fit fullrun_ccd2_acisf10847_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct 14 21:31:43 2011] Spatial fit model total counts = 57.367000, observed total counts = 59.000000
[Fri Oct 14 21:31:43 2011] Offset between fit and detection position for source 2 = 1.183805 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.183805 pixels
  Position = (1216.3, 635.7) = 14 17 37.35 52 42 37.5
  Extent = 2.0 (1.7-2.3)", rotation angle = 0
  Source counts = 57.2 +/- 7.6
  Background counts = 0.0
  Rate = 0.003 +/- 0.0004
[Fri Oct 14 21:31:43 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 21:31:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 21:31:43 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 21:31:43 2011] Source does appear to be extended
[Fri Oct 14 21:31:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 21:32:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 21:32:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 21:32:00 2011] Initial guess for spatial extent in simple fitting = 1.99"
[Fri Oct 14 21:32:00 2011] source mask rpix=4.0, npix_max = 82, mask sum = 81, frac = 0.981
[Fri Oct 14 21:32:00 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.99"
[Fri Oct 14 21:32:02 2011] fullrun_ccd2_acisf10847_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 14 21:32:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10847_pi14-548_cl_pass1_src3.csv
[Fri Oct 14 21:32:02 2011] fullrun_ccd2_acisf10847_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 14 21:32:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10847_pi14-548_cl_pass1_src3.csv
[Fri Oct 14 21:32:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10847_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10847_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 21:32:02 2011] fullrun_ccd2_acisf10847_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 14 21:32:02 2011] fullrun_ccd2_acisf10847_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 14 21:32:02 2011] Fit fullrun_ccd2_acisf10847_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct 14 21:32:07 2011] Spatial fit model total counts = 52.958300, observed total counts = 54.000000
[Fri Oct 14 21:32:07 2011] Offset between fit and detection position for source 2 = 0.314164 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.314164 pixels
  Position = (1216.5, 635.5) = 14 17 37.33 52 42 37.4
  Extent = 2.0 (1.5-2.2)", rotation angle = 0
  Source counts = 52.8 +/- 7.3
  Background counts = 0.0
  Rate = 0.003 +/- 0.0004
[Fri Oct 14 21:32:07 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 21:32:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 21:32:07 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 21:32:07 2011] Source does appear to be extended
[Fri Oct 14 21:32:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 21:33:21 2011] Not overwriting source region fullrun_ccd2_acisf10847_pi14-548_pass1_cl_src2_src.reg
[Fri Oct 14 21:33:21 2011] Extracting stamp from image fullrun_ccd2_acisf10847_pi14-548_cl_sm2.00.img.gz, (1127, 546) - (1306, 725)
[Fri Oct 14 21:33:21 2011] Writing fullrun_ccd2_acisf10847_pi14-548_pass1_cl_src2.gif
[Fri Oct 14 21:33:27 2011] ../../acisf10847/products/events/fullrun_ccd2_acisf10847_pi14-548_pass1_cl_src2_src.evt and ../../acisf10847/products/events/fullrun_ccd2_acisf10847_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct 14 21:33:27 2011] Size of ../../acisf10847/products/events/fullrun_ccd2_acisf10847_pi14-548_pass1_cl_src2_src.evt.gz[events] = 58 counts
[Fri Oct 14 21:33:27 2011] Mean chipx,y = (911.64, 852.40)
[Fri Oct 14 21:33:27 2011] Mean tdetx,y = (3913.40, 3174.36)
[Fri Oct 14 21:33:27 2011] chipx,y range = (894.00-936.00, 827.00-879.00)
[Fri Oct 14 21:33:27 2011] Size of ../../acisf10847/products/events/fullrun_ccd2_acisf10847_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 75 counts
[Fri Oct 14 21:33:27 2011] ../../acisf10847/products/images/fullrun_ccd2_acisf10847_pi14-548_pass1_cl_src2_src.img and ../../acisf10847/products/images/fullrun_ccd2_acisf10847_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct 14 21:33:27 2011] ../../acisf10847/products/spectra/fullrun_ccd2_acisf10847_pi14-548_pass1_cl_src2_src.pi and ../../acisf10847/products/spectra/fullrun_ccd2_acisf10847_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct 14 21:33:27 2011] Not generating rmf since there are only 52 counts
[Fri Oct 14 21:33:30 2011] ../../acisf10847/products/lightcurves/fullrun_ccd2_acisf10847_pi14-548_pass1_cl_src2_src.lc and ../../acisf10847/products/lightcurves/fullrun_ccd2_acisf10847_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct 14 21:34:15 2011] 160.259
[Fri Oct 14 21:35:53 2011] Updating aperture counts using extracted products
[Fri Oct 14 21:35:53 2011] Error reading totcts from fullrun_ccd2_acisf10847_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct 14 21:35:53 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 21:35:53 2011] Using photon index=1.80, rate=0.00274, arf fullrun_ccd2_acisf10847_pi14-548_pass1_cl_src2.arf
[Fri Oct 14 21:35:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 21:35:53 2011] Updating source flux to 4.1e-14
[Fri Oct 14 21:35:58 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting