[Fri Oct 21 02:44:57 2011] Detection parameters:
  Position = (372.3, 807.3) = 22 40 4.87 -40 13 7.6
  Extent = 0.8" x 0.5", rotation angle = 113 degrees
  Source counts = 11.3 +/- 3.5
  Background counts = 0.7
  Rate = 0.0004 +/- 0.0001

[Fri Oct 21 02:44:57 2011] Off-axis axis estimate = 4.81'
[Fri Oct 21 02:45:42 2011] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 02:45:42 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Fri Oct 21 02:45:42 2011] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.829
[Fri Oct 21 02:45:42 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 1.11"
[Fri Oct 21 02:45:43 2011] fullrun_ccd6_acisf10837_pi14-548_cl_pass0_src9.ximg exists
[Fri Oct 21 02:45:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10837_pi14-548_cl_pass0_src9.csv
[Fri Oct 21 02:45:43 2011] fullrun_ccd6_acisf10837_pi14-548_cl_pass0_src9_1.ximg exists
[Fri Oct 21 02:45:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10837_pi14-548_cl_pass0_src9.csv
[Fri Oct 21 02:45:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10837_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10837_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 02:45:43 2011] fullrun_ccd6_acisf10837_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Fri Oct 21 02:45:43 2011] fullrun_ccd6_acisf10837_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Oct 21 02:45:43 2011] Fit fullrun_ccd6_acisf10837_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Oct 21 02:45:50 2011] Spatial fit model total counts = 13.439300, observed total counts = 14.000000
[Fri Oct 21 02:45:50 2011] Offset between fit and detection position for source 10 = 0.805288 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.805288 pixels
  Position = (372.8, 808.0) = 22 40 4.87 -40 13 7.5
  Extent = 0.9 (0.7-1.3)", rotation angle = 0
  Source counts = 13.4 +/- 3.7
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Fri Oct 21 02:45:50 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 02:45:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 02:45:50 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 02:45:50 2011] Source does appear to be extended
[Fri Oct 21 02:45:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 02:46:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 02:46:07 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Fri Oct 21 02:46:07 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.960
[Fri Oct 21 02:46:07 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.88"
[Fri Oct 21 02:46:08 2011] fullrun_ccd6_acisf10837_pi14-548_cl_pass1_src8.ximg exists
[Fri Oct 21 02:46:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10837_pi14-548_cl_pass1_src8.csv
[Fri Oct 21 02:46:08 2011] fullrun_ccd6_acisf10837_pi14-548_cl_pass1_src8_1.ximg exists
[Fri Oct 21 02:46:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10837_pi14-548_cl_pass1_src8.csv
[Fri Oct 21 02:46:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10837_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10837_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 02:46:08 2011] fullrun_ccd6_acisf10837_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Fri Oct 21 02:46:08 2011] fullrun_ccd6_acisf10837_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Oct 21 02:46:08 2011] Fit fullrun_ccd6_acisf10837_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Oct 21 02:46:16 2011] Spatial fit model total counts = 14.672300, observed total counts = 14.000000
[Fri Oct 21 02:46:16 2011] Offset between fit and detection position for source 10 = 0.377374 pixels
[Fri Oct 21 02:46:16 2011] 15.008680 total counts/ 3.059380 bgd. counts: snr = 6.831652
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.377374 pixels
  Position = (372.9, 807.7) = 22 40 4.86 -40 13 7.7
  Extent = 0.8 (0.6-1.4)", rotation angle = 0
  Source counts = 11.9 +/- 3.9
  Background counts = 3.1
  Rate = 0.0004 +/- 0.0001
[Fri Oct 21 02:46:16 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 02:46:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 02:46:16 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 02:46:16 2011] Source does appear to be extended
[Fri Oct 21 02:46:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 02:47:07 2011] Not overwriting source region fullrun_ccd6_acisf10837_pi14-548_pass1_cl_src10_src.reg
[Fri Oct 21 02:47:07 2011] Extracting stamp from image fullrun_ccd6_acisf10837_pi14-548_cl_sm2.00.img.gz, (335, 770) - (411, 845)
[Fri Oct 21 02:47:07 2011] Writing fullrun_ccd6_acisf10837_pi14-548_pass1_cl_src10.gif
[Fri Oct 21 02:47:29 2011] ../../acisf10837/products/events/fullrun_ccd6_acisf10837_pi14-548_pass1_cl_src10_src.evt and ../../acisf10837/products/events/fullrun_ccd6_acisf10837_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Oct 21 02:47:29 2011] Size of ../../acisf10837/products/events/fullrun_ccd6_acisf10837_pi14-548_pass1_cl_src10_src.evt.gz[events] = 13 counts
[Fri Oct 21 02:47:29 2011] Mean chipx,y = (693.69, 264.00)
[Fri Oct 21 02:47:29 2011] Mean tdetx,y = (3568.69, 1966.00)
[Fri Oct 21 02:47:29 2011] chipx,y range = (676.00-713.00, 252.00-285.00)
[Fri Oct 21 02:47:30 2011] Size of ../../acisf10837/products/events/fullrun_ccd6_acisf10837_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 13 counts
[Fri Oct 21 02:47:30 2011] ../../acisf10837/products/images/fullrun_ccd6_acisf10837_pi14-548_pass1_cl_src10_src.img and ../../acisf10837/products/images/fullrun_ccd6_acisf10837_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Oct 21 02:47:30 2011] ../../acisf10837/products/spectra/fullrun_ccd6_acisf10837_pi14-548_pass1_cl_src10_src.pi and ../../acisf10837/products/spectra/fullrun_ccd6_acisf10837_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Oct 21 02:47:30 2011] Not generating rmf since there are only 11 counts
[Fri Oct 21 02:47:32 2011] ../../acisf10837/products/lightcurves/fullrun_ccd6_acisf10837_pi14-548_pass1_cl_src10_src.lc and ../../acisf10837/products/lightcurves/fullrun_ccd6_acisf10837_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Oct 21 02:47:37 2011] 189.197
[Fri Oct 21 02:48:52 2011] Updating aperture counts using extracted products
[Fri Oct 21 02:48:52 2011] Error reading totcts from fullrun_ccd6_acisf10837_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Oct 21 02:48:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 02:48:52 2011] Using photon index=1.80, rate=0.000432, arf fullrun_ccd6_acisf10837_pi14-548_pass1_cl_src10.arf
[Fri Oct 21 02:48:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 02:48:52 2011] Updating source flux to 5e-15
[Fri Oct 21 02:49:04 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting