[Wed Oct  5 04:43:55 2011] Detection parameters:
  Position = (596.7, 697.7) = 21 54 25.52 62 32 41.5
  Extent = 0.8" x 0.5", rotation angle = 82 degrees
  Source counts = 12.7 +/- 3.6
  Background counts = 0.3
  Rate = 0.0008 +/- 0.0002

[Wed Oct  5 04:43:56 2011] Off-axis axis estimate = 5.02'
[Wed Oct  5 04:45:16 2011] Using EEF radius (= 1.19 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 04:45:16 2011] Initial guess for spatial extent in simple fitting = 1.19"
[Wed Oct  5 04:45:16 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.058
[Wed Oct  5 04:45:16 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.19"
[Wed Oct  5 04:45:18 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass0_src5.ximg exists
[Wed Oct  5 04:45:18 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Oct  5 04:45:18 2011] Fit fullrun_ccd2_acisf10820_pi14-548_cl_pass0_src5 appears to have run properly
[Wed Oct  5 04:45:19 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Oct  5 04:45:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10820_pi14-548_cl_pass0_tfrozen_src5.csv
[Wed Oct  5 04:45:19 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Oct  5 04:45:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10820_pi14-548_cl_pass0_tfrozen_src5.csv
[Wed Oct  5 04:45:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10820_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10820_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 04:45:35 2011] Spatial fit model total counts = 13.037600, observed total counts = 17.000000
[Wed Oct  5 04:45:35 2011] Offset between fit and detection position for source 7 = 0.617378 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.617378 pixels
  Position = (597.1, 698.1) = 21 54 25.52 62 32 41.4
  Extent = 0.9 (0.5-1.1)", rotation angle = 0
  Source counts = 13.1 +/- 3.6
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Wed Oct  5 04:45:35 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 04:45:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 04:45:35 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 04:45:35 2011] Source does appear to be extended
[Wed Oct  5 04:45:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 04:46:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 04:46:37 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Wed Oct  5 04:46:37 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.805
[Wed Oct  5 04:46:37 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.85"
[Wed Oct  5 04:46:38 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass1_src5.ximg exists
[Wed Oct  5 04:46:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10820_pi14-548_cl_pass1_src5.csv
[Wed Oct  5 04:46:38 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Oct  5 04:46:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10820_pi14-548_cl_pass1_src5.csv
[Wed Oct  5 04:46:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10820_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10820_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 04:46:39 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Oct  5 04:46:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10820_pi14-548_cl_pass1_tfrozen_src5.csv
[Wed Oct  5 04:46:39 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Oct  5 04:46:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10820_pi14-548_cl_pass1_tfrozen_src5.csv
[Wed Oct  5 04:46:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10820_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10820_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 04:47:05 2011] Spatial fit model total counts = 14.697400, observed total counts = 17.000000
[Wed Oct  5 04:47:05 2011] Offset between fit and detection position for source 7 = 0.086727 pixels
[Wed Oct  5 04:47:05 2011] 14.471939 total counts/ 0.008839 bgd. counts: snr = 153.838741
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.086727 pixels
  Position = (597.2, 698.0) = 21 54 25.52 62 32 41.4
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 14.5 +/- 3.8
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Wed Oct  5 04:47:05 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 04:47:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 04:47:05 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 04:47:05 2011] Source does appear to be extended
[Wed Oct  5 04:47:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 05:37:25 2011] Not overwriting source region fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src7_src.reg
[Wed Oct  5 05:37:25 2011] Extracting stamp from image fullrun_ccd2_acisf10820_pi14-548_cl_sm2.00.img.gz, (562, 663) - (632, 733)
[Wed Oct  5 05:37:25 2011] Writing fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src7.gif
[Wed Oct  5 05:40:52 2011] ../../acisf10820/products/events/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src7_src.evt and ../../acisf10820/products/events/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Wed Oct  5 05:40:53 2011] Size of ../../acisf10820/products/events/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src7_src.evt.gz[events] = 15 counts
[Wed Oct  5 05:40:53 2011] Mean chipx,y = (516.20, 631.13)
[Wed Oct  5 05:40:53 2011] Mean tdetx,y = (3692.13, 3569.80)
[Wed Oct  5 05:40:53 2011] chipx,y range = (502.00-538.00, 615.00-650.00)
[Wed Oct  5 05:40:53 2011] Size of ../../acisf10820/products/events/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 4 counts
[Wed Oct  5 05:40:53 2011] ../../acisf10820/products/images/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src7_src.img and ../../acisf10820/products/images/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Wed Oct  5 05:40:53 2011] ../../acisf10820/products/spectra/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src7_src.pi and ../../acisf10820/products/spectra/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Wed Oct  5 05:40:53 2011] Not generating rmf since there are only 14 counts
[Wed Oct  5 05:41:25 2011] ../../acisf10820/products/lightcurves/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src7_src.lc and ../../acisf10820/products/lightcurves/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Wed Oct  5 05:45:38 2011] 168.046
[Wed Oct  5 05:51:51 2011] Updating aperture counts using extracted products
[Wed Oct  5 05:51:51 2011] Error reading totcts from fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src7_src.pi.gz
[Wed Oct  5 05:51:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 05:51:51 2011] Using photon index=1.80, rate=0.000918, arf fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src7.arf
[Wed Oct  5 05:51:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 05:51:51 2011] Updating source flux to 1.3e-14
[Wed Oct  5 05:52:10 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting